This was an embarassingly large amount of copy and pasted code,
and it wasn't particularly simple code either. By factoring it out
into a helper function, we consolidate the complexity.
v2: Properly NULL-check bo. Caught by Eric Anholt.
v3: Do the subtraction by 1 in gen7_emit_buffer_surface_state, rather
than making callers do it. This makes the buffer_size parameter
the actual size of the buffer. Suggested by Paul Berry.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was an embarassingly large amount of copy and pasted code,
and it wasn't particularly simple code either. By factoring it out
into a helper function, we consolidate the complexity.
v2: Properly NULL-check bo. Caught by Eric Anholt.
v3: Do the subtraction by 1 in gen7_emit_buffer_surface_state, rather
than making callers do it. This makes the buffer_size parameter
the actual size of the buffer. Suggested by Paul Berry.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The value that's split into width/height/depth needs to be the size of
the buffer minus one. This makes it consistent with the constant buffer
and shader time SURFACE_STATE setup code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This fixes myriads of regressions since commit 169f9c030c
("i965: Add an assertion that writemask != NULL for non-ARFs.").
On Sandybridge, our control flow handling (such as brw_IF) does:
brw_set_dest(p, insn, brw_imm_w(0));
insn->bits1.branch_gen6.jump_count = 0;
This results in a IMM destination with zero for the writemask. IMM
destinations are rather bizarre, but the code has been working for ages,
so I'm loathe to change it.
Fixes glxgears on Sandybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
I would use _mesa_delete_shader, but it's declared static, and we don't
really need any of the stuff in it anyway.
This fixes a memory leak caught by Valgrind.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
&a and &b are the address of the local stack variables, not the actual
structures. Instead of comparing the fields of a and b, we compared
...some stack memory.
Not a candidate for stable since GS code doesn't exist in 9.2.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
&a and &b are the address of the local stack variables, not the actual
structures. Instead of comparing the fields of a and b, we compared
...some stack memory.
Caught by Valgrind on Piglit's glsl-lod-bias test (among many others).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68233
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Cc: mesa-stable@lists.freedesktop.org
The code to upload the binding tables for each stage was scattered
across brw_{vs,gs,wm}_surface_state.c and brw_misc_state.c, which also
contain a lot of code to populate individual SURFACE_STATE structures.
This patch brings all the binding table upload code together, and splits
it out from the code which fills in SURFACE_STATE entries.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is not quite the same: brw_upload_binding_table() also has code to
early-return if there are no entries, while the existing code did not.
The PS binding table is unlikely to be empty since it will have at least
one color buffer. If it ever is empty, early returning seems wise.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of passing in a brw_vec4_prog_data structure, we can simply
pass the one field it needs: the number of entries in the binding table.
We also need to pass in the shader time surface index rather than
hardcoding SURF_INDEX_VEC4_SHADER_TIME.
Since the resulting function is stage-agnostic, this patch removes
"vec4_" from the name.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is probably more efficient. At any rate, it's less code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The first comment was a bit stale; there are more kinds of surfaces than
textures and pull constants.
The second was a leftover "to do" comment for something I already did.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
xlib_sw_winsys.h:5:22: fatal error: X11/Xlib.h: No such file or directory
The compiler cannot find the Xlib.h in the installed system headers.
All supplied include directives point to inside the mesa module.
The X11_CFLAGS variable is undefined (not defined in config.status).
It appears the intent was to use X11_INCLUDES defined in configure.ac.
The Xlib.h file is not installed on my workstation. It is supplied in
the libx11-dev package. This allows an X developer control over which
version of this file is used for X development.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
egl_glx.c:40:22: fatal error: X11/Xlib.h: No such file or directory
The compiler cannot find the Xlib.h in the installed system headers.
All supplied include directives point to inside the mesa module.
The X11_CFLAGS variable is undefined (not defined in config.status).
It appears the intent was to use X11_INCLUDES defined in configure.ac.
The Xlib.h file is not installed on my workstation. It is supplied in
the libx11-dev package. This allows an X developer control over which
version of this file is used for X development.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Technically without seamless filtering enabled GL allows any wrap mode, which
made sense when supporting true borders (can get seamless effect with border
and CLAMP_TO_BORDER), but gallium doesn't support borders and d3d9 requires
wrap modes to be ignored and it's a pain to fix up the sampler state (as it
makes it texture dependent). It is difficult to imagine a situation where an
app really wants another behavior so just cheat here. (It looks like some
graphics hw (intel) actually requires this too hence it should be safe.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The first part was done in:
commit c845140a20
Author: Kenneth Graunke <kenneth@whitecape.org>
Date: Tue Sep 3 21:22:17 2013 -0700
Signed-off-by: Adrian Negreanu <adrian.m.negreanu@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This removes a lot of code, but not everything, as util_blit_pixels_tex
is still useful when one needs to override pipe_sampler_view::swizzle_?.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
By calling util_map_texcoords2d_onto_cubemap.
A new parameter for util_blit_pixels_tex is necessary, as
pipe_sampler_view::first_layer is always supposed to point to the first
face when sampling from cubemaps.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Only compile-tested but it seems straightforward.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The previous names were really confusing to talk about:
- brw_fs_visitor() contained methods named emit_whatever().
- brw_fs_generator() contained methods named generate_whatever(), but
lived in brw_fs_emit.cpp.
So when someone said "the emit layer", or "emit code", we weren't sure
whether they meant the visitor's emit() functions or the generator in
brw_fs_emit.cpp.
By renaming these files, the method names, class names, and file names
all match, which is much less confusing.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
I initially implemented frexp() as an IR opcode with a lowering pass,
but since it returns a value and has an out-parameter, it would break
assumptions our optimization passes make about ir_expressions being pure
(i.e., having no side effects).
For example, if opt_tree_grafting encounters this code:
uniform float u;
void main()
{
int exp;
float f = frexp(u, out exp);
float g = float(exp)/256.0;
float h = float(exp) + 1.0;
gl_FragColor = vec4(f, g, h, g + h);
}
it may try to optimize it to this:
uniform float u;
void main()
{
int exp;
float g = float(exp)/256.0;
float h = float(exp) + 1.0;
gl_FragColor = vec4(frexp(u, out exp), g, h, g + h);
}
Some hardware has an instruction which performs frexp(), but we would
need some other compiler infrastructure to be able to generate it, such
as an intrinsics system that would allow backends to emit specific code
for particular bits of IR.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Note the parameter name change in the int version of ir_constant, to
avoid the conflict with the loop iterator.
v2: Make analogous change to builtin_builder::imm().
Reviewed-by: Paul Berry <stereotype441@gmail.com>
These data structures are used for debug output, so it wasn't hurting
anything that there were missing bits. But it's good to keep things
up to date.
This patch also adds static asserts so that the {brw,cache}_bits[]
arrays are the proper size, so that we don't forget to add to them in
the future. Unfortunately there's no convenient way to assert that
mesa_bits[] is the proper size.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If the geometry shader refers to the built-in variable
gl_PrimitiveIDIn, we need to set a bit in 3DSTATE_GS to tell the
hardware to dispatch primitive ID to r1, and we need to leave room for
it when allocating registers.
Note: this feature doesn't yet work properly when software primitive
restart is in use (the primitive ID counter will incorrectly reset
with each primitive restart, since software primitive restart works by
performing multiple draw calls). I plan to address that in a future
patch series.
Fixes piglit test "spec/glsl-1.50/execution/geometry/primitive-id-in".
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we previously implemented primitive restart, we didn't add cases
to brw_primitive_restart.c's can_cut_index_handle_prims() for the
primitive types that are introduced with geometry shaders. It turns
out that all of the new primitive types are supported by hardware
primitive restart.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As part of its support for geometry shaders, GL 3.2 introduces four
new primitive types: GL_LINES_ADJACENCY, GL_LINE_STRIP_ADJACENCY,
GL_TRIANGLES_ADJACENCY, and GL_TRIANGLE_STRIP_ADJACENCY.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Simply adjust wrap mode to clamp_to_edge. This is all that's needed for a
correct implementation for nearest filtering, and it's way better than
using repeat wrap for instance for linear filtering (though obviously this
doesn't actually do seamless filtering).
v2: fix s/t wrap not r/s...
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Specifying a miptree layout makes no sense for constant buffers.
This has no functional change since BRW_SURFACE_MIPMAPLAYOUT_BELOW is
just a #define for 0.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Now we use gen7_upload_constant_state() for all three shader stages.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This paves the way for using gen7_upload_constant_state for PS data.
The formula is copied from gen7_wm_state.c.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This saves a bit of typing and shortens a few lines.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
GL 3.2 requires us to support 128 varying components for geometry
shader outputs and fragment shader inputs, and 64 varying components
otherwise. But there's no hardware limitation that restricts us to 64
varying components, and core Mesa doesn't currently allow different
stages to have different maximum values, so just go ahead and enable
128 varying components for all stages. This gets us better test
coverage anyway.
Even though we are only working on GL 3.2 support for gen7 right now,
gen6 also supports 128 varying components, so go ahead and switch it
on there too.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we only ever did 1 URB write, since the maximum number of
varyings we support is small enough to fit in 1 URB write (when using
BRW_URB_SWIZZLE_NONE, which is what the pre-Gen7 GS always uses). But
we're about to increase the number of varying components we support
from 64 to 128.
With 128 varyings, the most URB writes we'll have to do is 2, but it's
just as easy to write a general-purpose loop.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The "{VS,GS} URB Entry Allocation Size" fields of 3DSTATE_URB allow
values in the range 0-4, but they are U8-1 fields, so the range of
possible allocation sizes is 1-5. We were erroneously prohibiting a
size of 5.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we only ever did 1 or 2 URB writes, since the maximum
number of varyings we support is small enough to fit in 2 URB writes.
But GL 3.2 requires the geometry shader to support 128 output varying
components, and this could require up to 3 URB writes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since the SF/SBE stage is only capable of performing arbitrary
reorderings of 16 varying slots, we can't arrange the fragment shader
inputs in an arbitrary order if there are more than 16 input varying
slots in use. We need to make sure that slots 16-31 match the
corresponding outputs of the previous pipeline stage.
The easiest way to accomplish this is to just make all varying slots
match up with the previous pipeline stage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The for loop was rather silly. In addition to checking brw->gen < 6
on each loop iteration, it took pains to exclude bits from
fp->Base.InputsRead that don't correspond to fragment shader inputs.
But those bits would never have been set in the first place, since the
only bits that are ever set in fp->Base.InputsRead are fragment shader
inputs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that the vertex shader output VUE map is determined solely by a
64-bit bitfield, we don't have to store it in its entirety in the
geometry shader program key; instead, we can just store the bitfield,
and let the geometry shader infer the VUE map at compile time.
This dramatically reduces the size of the geometry shader program key,
which we want to keep small since it gets recomputed whenever the
active program changes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, on Gen6+, we laid out the vertex (or geometry) shader VUE
map differently depending whether user clipping was active. If it was
active, we put the clip distances in slots 2 and 3 (where the clipper
expects them); if it was inactive, we assigned them in the order of
the gl_varying_slot enum.
This made for unnecessary recompiles, since turning clipping on/off
for a shader that used gl_ClipDistance might rearrange the varyings.
It also required extra bookkeeping, since it required the user
clipping flag to be provided to brw_compute_vue_map() as a parameter.
With this patch, we always put clip distances at in slots 2 and 3 if
they are written to. do_vs_prog() and do_gs_prog() are responsible
for ensuring that clip distances are written to when user clipping is
enabled (as do_vs_prog() previously did for gen4-5).
This makes the only input to brw_compute_vue_map() a bitfield of which
varyings the shader writes to, a fact that we'll take advantage of in
forthcoming patches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, if a fragment shader accessed gl_FragCoord or
gl_FrontFacing, we would assign them their own slots in the fragment
shader input attribute array, using up space that could be made
available to real varyings. This was not strictly necessary (since
these values are not true varyings, and are instead computed from
other data available in the FS payload). But we had to do it anyway
because the SF/SBE setup code assumed that every 1 bit in the
gl_program::InputsRead bitfield corresponded to a genuine varying
variable.
Now that the SF/SBE code consults brw_wm_prog_data and only sets up
the attributes that the fragment shader actually needs, we don't have
to do this anymore.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, the SF/SBE setup code delivered varying inputs to the FS
in the order in which they appear in the gl_program::InputsRead
bitfield, since that's what the FS expects.
When we add support for more than 64 varying components, this will no
longer always be the case, because the Gen6+ SF/SBE stage is only
capable of performing arbitrary reorderings of 16 varying slots. So,
when there are more than 16 vec4's worth of varying inputs, the FS
will have to adjust the order its input varyings in order to partially
match the order of outputs from the geometry or vertex shader.
To allow extra flexibility in the ordering of FS varyings, this patch
causes the SF/SBE to deliver varying inputs to the FS in exactly the
order that the FS requests, by consulting brw_wm_prog_data::urb_setup
and brw_wm_prog_data::num_varying_inputs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
