I didn't bother switching either iris or elk/hasvk but one could.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37517>
This doesn't replace existing support for INTEL_DEBUG=shaders -- so both
`shaders` and `mda` can be used.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29146>
Fixed the types in brw_inst::bits so the struct is packed correctly.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36730>
Move all the SEND specific fields from brw_inst into brw_send_inst.
This new instruction kind will contain all variants of SENDs plus the
virtual opcodes that were already relying on those SEND fields.
Use the `as_send()` helper to go from a brw_inst into the brw_send_inst
when applicable. Some of the code was changed to use the brw_send_inst
type directly.
Until other kinds are added, all the instructions are allocated the same
amount of space as brw_send_inst. This ensures that all
brw_transform_inst() calls are still valid. This will change after
a few patches so that BASE instructions can use less memory.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36730>
These dependency hints were primarily useful for the vec4 backend, where
it was common to write subsets of a vec4's components across multiple
instructions. In the scalar backend, we rarely used them. They also no
longer exist on Tigerlake and later in favor of software scoreboarding.
Dropping this allows us to clean up the IR a bit.
We still use the hardware hints in the generator in a couple places:
- Gfx9-12.0 scratch headers
- Quad swizzles
- Indirect MOV lowering
In theory we might want them back if we moved that lowering to the IR.
For scratch at least, I suspect it won't have a huge impact, as we're
already incurring the cost of spills/fills. The others are fairly rare
as well, so it may not be worth keeping.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36730>
This introduces enums for SHADER_OPCODE_SEND[_GATHER] sources, similar
similar to what we've done for most of the newer logical opcodes. This
allows us to use actual names for sources rather than remembering their
order, or leaving ourselves comments like /* ex_desc */ all over. It
will also make it easier to add or reorder sources in the future.
While we're at it, we also standardize on the number of sources.
Previously, we allowed SHADER_OPCODE_SEND to have either 3 (monosend) or
4 (split send) sources, but this is mostly for haphazard historical
reasons. We now specify all sources every time, eliminating the need
for careful inst->source checks before accessing the last source.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34040>
It's not only for GL, change to a generic name.
Use command:
find . -type f -not -path '*/.git/*' -exec sed -i 's/\bgl_shader_stage\b/mesa_shader_stage/g' {} +
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36569>
NIR is going to use exec_node/list without the C++ code, and may switch to
a different linked list implementation in the future.
GLSL is going to use ir_exec_node/list, which we want to keep private
for GLSL, so that we can change it easily.
Thus, it's better to fork the C++ version of list.h for Intel.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36425>
In the C23 standard unreachable() is now a predefined function-like
macro in <stddef.h>
See https://android.googlesource.com/platform/bionic/+/HEAD/docs/c23.md#is-now-a-predefined-function_like-macro-in
And this causes build errors when building for C23:
-----------------------------------------------------------------------
In file included from ../src/util/log.h:30,
from ../src/util/log.c:30:
../src/util/macros.h:123:9: warning: "unreachable" redefined
123 | #define unreachable(str) \
| ^~~~~~~~~~~
In file included from ../src/util/macros.h:31:
/usr/lib/gcc/x86_64-linux-gnu/14/include/stddef.h:456:9: note: this is the location of the previous definition
456 | #define unreachable() (__builtin_unreachable ())
| ^~~~~~~~~~~
-----------------------------------------------------------------------
So don't redefine it with the same name, but use the name UNREACHABLE()
to also signify it's a macro.
Using a different name also makes sense because the behavior of the
macro was extending the one of __builtin_unreachable() anyway, and it
also had a different signature, accepting one argument, compared to the
standard unreachable() with no arguments.
This change improves the chances of building mesa with the C23 standard,
which for instance is the default in recent AOSP versions.
All the instances of the macro, including the definition, were updated
with the following command line:
git grep -l '[^_]unreachable(' -- "src/**" | sort | uniq | \
while read file; \
do \
sed -e 's/\([^_]\)unreachable(/\1UNREACHABLE(/g' -i "$file"; \
done && \
sed -e 's/#undef unreachable/#undef UNREACHABLE/g' -i src/intel/isl/isl_aux_info.c
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36437>
Previously, brw_try_override_assembly was only called when a debug flag was
enabled. However, during investigations involving workloads such as Steam
games, enabling the debug flag results in excessive NIR and ISA output to
stderr, making debugging more difficult.
This change ensures that brw_try_override_assembly is called when the
INTEL_SHADER_ASM_READ_PATH is set, regardless of the debug flag. This
improves usability in scenarios where minimal debug output is desired.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35115>
This patch improves code readability by centralizing the type stomping
logic for Gen12.5 region restrictions in `brw_lower_alu_restrictions`.
It removes redundant comments and ensures type consistency assertions
in `brw_broadcast`, `generate_mov_indirect`, and `generate_shuffle`.
Thank you Ken for guiding me on this.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35006>
Allow us to parse instructions in a form we currently generate
```
dpas.8x8(8) g55<1>F g47<1,1,0>F g31<1,1,0>HF g39<1,1,0>HF { align1 WE_all 1Q $4 };
```
Regions are not really needed, but this will be handled in a later patch
(that will also stop printing the regions).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34031>
It turns out that we need to add a NOP not only in between two
consecutive WHILE instructions, but also after every control flow
instruction that immediately precedes a WHILE.
v2: Rebase after the renames.
Fixes: 5ca883505e ("brw: add a NOP in between WHILE instructions on LNL")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33021>
Make the "block after DO" more stable so that adding instructions after
a DO doesn't require repairing the CFG. Use a new SHADER_OPCODE_FLOW
instruction that is a placeholder representing "go to the next block"
and disappears at code generation.
For some context, there are a few facts about how CFG currently works
- Blocks are assumed to not be empty;
- DO is always by itself in a block, i.e. starts and ends a block;
- There are no empty blocks;
- Predicated WHILE and CONTINUE will link to the "block after DO";
- When nesting loops, it is possible that the "block after DO" is
another "DO".
Reasons and further explanations for those are in the brw_cfg.c comments.
What makes this new change useful is that a pass might want to add
instructions between two DO instructions. When that happens, a new
block must be created and any predicated WHILE and CONTINUE must be
repaired.
So, instead of requiring a repair (which has proven to be tricky in
the past), this change adds a block that can be "virtually" empty but
allow instructions to be added without further changes.
One alternative design would be allowing empty blocks, that would be
a deeper change since the blocks are currently assumed to be not empty
in various places. We'll save that for when other changes are made to
the CFG.
The problem described happens in brw_opt_combine_constants, and a
different patch will clean that up.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33536>
This is a debug feature that we kind of manage in the driver atm. It's
better that we move this completely to the compiler and can load it
from the cache.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michael Cheng <michael.cheng@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33643>
We teach lower_logical_sends to lower these to SHADER_OPCODE_SEND
and drop all the corresponding generator and eu_emit code.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33297>
Memory fences do not refer to an element of a binding table. Rather,
the reason we had "BTI" in these opcodes was to distinguish what in
modern terms are called UGM (untyped memory data cache) vs. SLM
(cross-thread shared local memory) fences.
Icelake and older platforms used the "data cache" SFID for both
purposes, distinguishing them by having a special binding table
index, 254, meaning "this is actually SLM access". This is where
the notion that fences had BTIs came in. (In fact, prior to Icelake,
separate SLM fences were not a thing, so BTI wasn't used there either.)
To avoid confusion about BTI being involved, we choose a simpler lie: we
have Icelake SLM fences target GFX12_SFID_SLM (like modern platforms
would), even though it didn't really exist back then. Later lowering
code sets it back to the correct Data Cache SFID with magic SLM binding
table index. This eliminates BTI everywhere and an unnecessary source.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33297>
Starting in Xe3, there's a variant of SEND that take the
register numbers from the ARF scalar register, and don't
require them to be contiguous. The new opcode added here
represents that kind of SEND.
To make the original sources still reachable, we keep them
around during the IR, just ignoring them at generator time.
This allow software scoreboard to properly reason the
dependencies without trying to decode the contents of ARF
scalar register being used.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32410>
