We just need to handle it while translating NIR to BIR, the hardware can
do automatic widening to 32-bits.
Signed-off-by: Lorenzo Rossi <lorenzo.rossi@collabora.com>
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41096>
Since inline parameter is the last field of the thread payload, the
backend can always assume they may exist. They won't affect the
position of other payload fields and the register allocator will
reuse any unused space.
In Anv, also update EmitInlineParameter for Task/Mesh/CS to reflect
previous changes in inline parameter setup. Remove/Update some stale
comments since we are here.
Finally, remove the prog_key/prog_data bits that tracked whether inline
data or a push address was needed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41230>
NVK is only going to use it for `fmul_rtz(frcp(ipa), ipa)` patterns, so
try not too hard to optimize this.
Totals from 10 (0.00% of 1212873) affected shaders:
CodeSize: 34480 -> 34288 (-0.56%); split: -0.60%, +0.05%
Static cycle count: 6225 -> 6132 (-1.49%); split: -1.57%, +0.08%
Reviewed-by: Mel Henning <mhenning@darkrefraction.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41179>
This contains new tests for DGC+multiview which are valid in DX12
but invalid in Vulkan, unless RADV allows support for it. Important
to have coverage for us because it's used for Crimson Desert.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41193>
V3D advertises maxComputeWorkGroupInvocations = 256 but ggml-vulkan
in many cases ignores this limit an creates compute pipelines with
over this limit. Although this is a bug in the application we can
take advantage of nir_lower_workgroup_size and make the application
work.
This issue was causing an assertion failure at nir_to_vir.c:
assert(c->local_invocation_index_bits <= 8);
The solution is lowering the oversized workgroups to a 256-invocation
workgroup loop, like radv and radeonsi are doing on GFX7, by running
nir_lower_workgroup_size(256) for this scenario.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41257>
Currently local shared memory is backed by a BO that is read/written
using the TMU.
ggml-vulkan probes the size of maxComputeSharedMemorySize and rejects
V3DV (falling back to CPU) when the value is below what its larger
compute pipelines request, although in the end the shaders ollama
runs don't actually use shared memory.
32 KB is what ggml-vulkan demands; the value can grow further with no
real per-op cost since shared memory currently goes through the TMU
like any other BO.
V3D OpenGL driver also has 32 KB for SharedMemory.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41257>
`__builtin_ctz` is not well defined for `0`, so provide a default value
of `0` for this case. The other sensible choice would be `64`, but that
does not fit in the 5 bit `divisor_r` field (which is how I noticed this,
we were triggering a run time assert in a debug build).
We should skip `launch_draw` if there are no vertices to draw.
This avoids a crash in some indirect rendering tests on Bifrost.
Reviewed-by: Christoph Pillmayer <christoph.pillmayer@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41117>
The combination of nir_opt_if and nir_lower_undef_to_zero running inside
the optimization loop could make it to not converge.
This was exercised by ollama running gemma3 compute shaders.
Removing the pass from the optimization loop results in No changes in
shader-db.
Assisted-by: Claude Opus 4.6
Fixes: cbe24a0e9c ("broadcom/compiler: use nir_lower_undef_to_zero")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41256>
libdrm splits the HIGH address space in two equal parts for GPUs that
are affected by the SMEM loads with NULL PRT page.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38698>
In amdvgpu_bo_free(), when the reference count drops to 0, vdrm_flush()
is called before removing the bo from the handle_to_vbo hash table.
Since vdrm_flush() is a time-consuming operation and is executed outside
of the handle_to_vbo_mutex lock, another thread calling amdvgpu_bo_import()
can concurrently find this bo in the hash table, increment its refcount,
and attempt to use it. Once vdrm_flush() finishes, amdvgpu_bo_free()
proceeds to remove the bo and call free(), leaving the importing thread
with a dangling pointer, which leads to a use-after-free or double free
crash.
To fix this race condition, we must remove the bo from the hash table
under the lock first. After the bo is safely unlinked and the lock is
released, we can then perform the time-consuming vdrm_flush() and the
actual memory release.
Signed-off-by: zhaqian <zhaqian@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41146>
Currently the code handling deferred RTA clears cannot handle them for
secondary command buffers within render passes, because the code
immediately configures the transfer command for the deferred clear
operation, but the specific attachment image view isn't known when
recording secondary command buffers to be executed inside render passes.
Add code to record parameters for deferred RTA clears in secondary
command buffers when the attachment is unknown, and bind the recorded
clears to the attachment's image view when executing the secondary
command buffer inside a render pass.
Fixes many dynamic rendering random tests.
Backport-to: 26.0
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/40838>
The code that adds deferred RTA clear transfer commands checks whether
the newly allocated transfer command is NULL. However the list_addtail
call is before the check, which means that the check does not prevent
NULL dereference.
Reorder the code to ensure no NULL transfer commands would ever be added
to the deferred clear list.
In addition, pvr_transfer_cmd_alloc() has already set the command
buffer's error status when it returns NULL, so it's not needed to set it
again.
Fixes: 2eabbbe57d ("pvr: use linked list to back deferred clears")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/40838>
For 2D array views of 3D images, the layer of the view corresponds to
the depth (instead of the layer, which should be always 0) of the image.
Fix the code emitting deferred RTA clears to set the depth instead of
the layer of the image to clear.
Fixes the flakiness of `dEQP-VK.renderpasses.renderpass*.
remaining_array_layers.multi_layer_fb.*`.
Fixes: 95820584d0 ("pvr: Add deferred RTA clears for cores without gs_rta_support.")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/40838>
Deferred RTA clear will happen after the current graphics subcommand is
executed, which may override rendered image in the graphics subcommand.
In addition, the active render targets do not need "emulated" clear --
they can be really cleared by drawing rectangles.
Skip set up deferred RTA clear for active render target layers, and
continue to do immediate clear for these layers.
Fixes a few dynamic rendering random CTS tests, but the issue should
also exist in legacy renderpasses RTA clears.
Fixes: 95820584d0 ("pvr: Add deferred RTA clears for cores without gs_rta_support.")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/40838>
While testing HW without gs_rta_support it was raised that this
change had been made in error. After retesting with the change
reverted the listed tests still pass.
This reverts commit d68344bffe.
Backport-to: 26.0
Reported-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Signed-off-by: Nick Hamilton <nick.hamilton@imgtec.com>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/40838>
When maxPerStageResources is less than 128, it must be at least the sum
of maxPerStageDescriptorUniformBuffers,
maxPerStageDescriptorStorageBuffers, maxPerStageDescriptorSampledImages,
maxPerStageDescriptorStorageImages,
maxPerStageDescriptorInputAttachments and maxColorAttachments.
As maxPerStageDescriptorStorageBuffers is previously increased, the
value of maxPerStageResources should be increased too.
This fixes regression on two limit validation tests in the Vulkan CTS --
dEQP-VK.info.device_properties and dEQP-VK.api.info.
vulkan1p2_limits_validation.general .
Fixes: 35f57a2739 ("pvr: increase value of maxPerStageDescriptorStorageBuffers")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/41270>
