The new HiZ compresses twice as many rows of the depth surface compared
to TGL (Bspec 47009). Also, its tiling needs to be specified in
3DSTATE_HIER_DEPTH_BUFFER_BODY::TiledMode.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14091>
XeHP defines new tiling formats, Tile4 and Tile64. They are needed in
order to support depth/stencil surfaces and multisampling. Create new
ISL enums and define some initial tiling information in order to enable
them later on.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
They are not used yet but the layout of Yf and Ys tiles are dependent on
these parameters. While we're here, better document the function.
Rework:
* Nanley: Update crocus.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
This is mostly a bit of future-proofing. We never end up with offsets
that don't fit in 32 bits today because, thanks to driver limitations
caused by relocations, we don't allocate buffers bigger than 2GB today.
However, if we ever did, it's possible to create a surface on modern
platforms that consumes more than 4GB and we would end up with wrapping
in our offset calculations.
Acked-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11765>
The docs weren't updated when we switched it to 4D. Also, the new docs
are way better. While we're here, use the parameter name offset_B to be
more consistent.
Acked-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11765>
We can actually create array surfaces instead of requiring single-slice
in a few cases. This does require us to be very careful about our
checks, though.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11647>
This adds a helper isl_surf_get_uncompressed_surf for creating a surface
which provides an uncompressed view into a compressed surface. The code
is basically a direct port of the uncompressed surface code from the
Vulkan driver which, in turn, was a port from BLORP.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11647>
XeHP adds support for a new surface type for scratch. It's similar to
SURFTYPE_STRBUF in that it's a 2D array-of-struct format but the one
key difference is that the U coordinate is computed automatically based
on the thread ID and only the V coordinate is provided in the dataport
message.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11582>
This gets rid of the awkward interface for isl_surf_get_ccs_surf where
we passed it two aux surfaces and it was supposed to fill out the second
one based on whether or not the first one already had stuff in it.
Instead, we now pass it three well-labled surfaces: surf,
hiz_or_mcs_surf, and ccs_surf which have obvious meanings. This does
mean that iris has to carry a bit of logic and we have to flip
parameters around in all the callers. But the resulting interface is
much cleaner.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11479>
Whether or not a surface supports CCS on Tigerlake and later is
dependent not only on the main surface but also on the MCS or HiZ
surface, if any. We were doing some of these checks in
isl_get_ccs_surf based on the extra_aux parameter but not as many as we
probably should. In particular, we were really only checking HiZ
conditions and nothing for MCS. It also meant that, in spite of the
symmetry in names, the checks in isl_surf_get_ccs_surf were more
complete than in isl_surf_supports_ccs.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11479>
We need to do this in order to handle Yf and Ys tiling because they use
a four-dimensional tile instead of laying everything out in two
dimensions.
v2 (Jason Ekstrand):
- Update functions added since v1:
- isl_surf_get_image_range_B_tile
- blorp_can_hiz_clear_depth
- get_image_offset_el
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v1)
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11330>
This drops
-0000000000011e90 R isl_format_layouts
+0000000000008f48 R isl_format_layouts
I think that's about 36k.
Thanks to Jason for suggesting PACKED
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11232>
Putting a const char * in the struct means it's a pointer that has to be
resolved at rtld time, which means it can be in .data.rel.ro but not
.rodata like you'd hope. Fix this with the usual string table trick.
Cuts about 20k (-80k read-write +60k read-only) and ~280 relocations
from the gallium driver.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11168>
Note that CCS isn't ambiguated during a HiZ ambiguate. Dumping the CCS
surface after a HiZ ambiguate shows that the CCS is unchanged.
Fixes: 98dc7f56b7 ("intel/isl: Add a separate ISL_AUX_USAGE_HIZ_CCS_WT")
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9112>
One exception is src/amd/addrlib/, for which -Wimplicit-fallthrough is
explicitly disabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
This allows Vulkan and GL to iterate over the full list of modifiers
instead of hard-coding in various places the "same" list as isl.
(Anvil's list has already diverged from isl's list. It omits Gen12
modifiers).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If each format channel has the same base type (such unorm), then that
is the format's "uniform channel type".
Calculating the field at buildtime is probably better than looping over
all channels at runtime each time we wish to query it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Return the modifier's score, which indicates the driver's preference for the
modifier relative to others. A higher score is better. Zero means
unsupported.
Intended to assist selection of a modifier from an externally provided list,
such as VkImageDrmFormatModifierListCreateInfoEXT.
v2:
- Rename anv_drm_format_mod_score to isl_drm_modifier_get_score.
- Squash all incremental changes to anv_drm_format_mod_score.
v3:
- Drop redundant 'unlikely'. (for nchery)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v3)
Thanks to Felix Degrood for discovering that we missed enabling this
additional caching on Tigerlake! Felix also benchmarked the changes.
We now use MOCS 48 (HDC:L1 + L3 + LLC) for render targets, textures,
and pull constant buffers. We leave storage buffers & images, as well
as stateless messages, using the previous MOCS 2 value. We can't use
HDC:L1 with atomics, and we don't know a priori whether storage buffers
will be used with atomics or not. Similarly, the Vulkan buffer device
address feature allows atomics to be performed on buffers via stateless
messages, and we only can control MOCS at the base address level, so
we can't do much there.
This is closer to what the Windows Vulkan and OpenGL drivers do,
though it isn't quite the same - they also disable LLC in some cases,
but we observed this to have noticable performance regressions when
we tried (though a couple titles benefited). We may try experiment
with that in the future.
Improves performance in a number of titles:
- Unreal Engine 4 Shooter Demo [VK]: 11.8%
- Witcher 3 [DXVK]: 3.9%
- Rise of the Tomb Raider [VK]: 1.5%
- Shadow of the Tomb Raider [VK]: 1.0%
- Grand Theft Auto V [DXVK]: 0.8%
We did not observe any performance regressions.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7104>
On Gen12+, we can enable additional caches in certain usage situations.
This routes that decision making to a central place in ISL, based on
surface usage flags, and updates both drivers to use it. (i965 doesn't
need to change because it doesn't support Gen12.)
We continue handling the "external" decision via an anv_mocs() wrapper
for now, since we store that flag in anv_bo, which isl doesn't know
about. (We could introduce an ISL_SURF_USAGE_EXTERNAL, but I'm not
actually sure that would be cleaner.)
This patch should not have any functional nor performance effects, as
we continue selecting the exact same MOCS values for now.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7104>
* Define ISL equivalents for the P010, P012, and P016 formats.
* Add aux-map encodings for the YUV formats iris will soon support.
v2. Replace &&'s with ||'s in isl_format_is_planar() (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6486>
