Otherwise, generate a link time error as per the
ARB_shader_storage_buffer_object spec.
v2:
- Fix error message (Jordan)
v3:
- Move std140_size() changes to its own patch (Kristian)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Get interface packing information from interface's type, not the
variable type.
- Simplify is_std430 condition in emit_access() for readability (Jordan)
- Add a commment explaing why array of three-component vector case is
different in std430 than the rest of cases.
- Add calls to std430_array_stride().
v3:
- Simplify size_mul change for std430's case (Jordan)
- Fix commit log lines length (Jordan)
- Pass 'packing' instead of 'is_std430' to emit_access() (Kristian)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
They are used to calculate the offset, array stride of uniform/shader
storage buffer variables. Take into account this info to get the right
value for std430.
v2:
- Fix commit log line length and indention. (Jordan)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Fix a missing check in has_layout()
v3:
- Mention shader storage block in error message for layout qualifiers
(Kristian).
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
They are used to calculate size, base alignment and array stride values
for a glsl_type following std430 rules.
v2:
- Paste OpenGL 4.3 spec wording as it mentions stride of array. (Jordan)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This kind of definitions:
layout(xxx) buffer;
was not supported by commit 84fc5fece0.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Also if GL_ARB_shading_language_420pack extension is enabled.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
The returned drm buffer object has a size multiple of 4096 but that should not
be exposed to the API user, which is working with a different size.
As far as I can see this problem is only visible in the calculation of the
length of unsized arrays used in SSBOs, as the implementation of this needs
to query the underlying buffer size via a message.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Otherwise we can expect odd things to happen if, for example, we ask
for the size of the attached buffer from shader code, since that
might query this value from the surface we uploaded and get random
results.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Remove inst->regs_written assignment as the instruction only
writes to one register.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Notice that Skylake needs to include a header in the sampler message
so it will need some tweaks to work there.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This is how backends provide the buffer size required to compute
the size of unsized arrays in the previous patch
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Reduce the number of lines over 80 character line width
limit. (Thomas Hellan)
v3:
- Inject the formula to compute the array length in the IR, backends
only need to provide the buffer size (Curro)
- Create an auxiliary function to simplify code (Jordan Justen)
- Rename variables (Jordan Justen)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
The unsized array length is computed with the following formula:
array.length() =
max((buffer_object_size - offset_of_array) / stride_of_array, 0)
Of these, only the buffer size needs to be provided by the backends, the
frontend already knows the values of the two other variables.
This patch identifies the cases where we need to get the length of an
unsized array, injecting ir_unop_ssbo_unsized_array_length expressions
that will be lowered (in a later patch) to inject the formula mentioned
above.
It also adds the ir_unop_get_buffer_size expression that drivers will
implement to provide the buffer length.
v2:
- Do not define a triop that will force backends to implement the
entire formula, they should only need to provide the buffer size
since the other values are known by the frontend (Curro).
v3:
- Call state->has_shader_storage_buffer_objects() in ast_function.cpp instead
of using state->ARB_shader_storage_buffer_object_enable (Tapani).
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
They only can be defined in the last position of the shader
storage blocks.
When an unsized array is used in different shaders, it might be
converted in different sized arrays, avoid get a linker error
in that case.
v2:
- Rework error condition and error messages (Timothy Arceri)
v3:
- Move OpenGL ES check to its own patch.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Buffer variables are the same as uniforms, only that read/write, so we want
the same treatment.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Since these are a special kind of UBOs we emit them together reusing the
same infrastructure, however, we use a RAW surface so we can reuse
existing untyped read/write/atomic messages which include a pixel mask
header that we need to set to obtain correct behavior with helper
invocations of the fragment shader.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Set it after the driver's MaxShaderStorageBuffers value assignment.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
We use the same dirty state for SSBOs and UBOs because they share the
same infrastructure.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This should be a cacheline (64 bytes) so that we can safely have the
CPU and GPU writing the same SSBO on non-cachecoherent systems (our
Atom CPUs). With UBOs, the GPU never writes, so there's no
problem. For an SSBO, the GPU and the CPU can be updating disjoint
regions of the buffer simultaneously and that will break if the
regions overlap the same cacheline.
v2:
- Use cacheline size (64 bytes) instead of 16 bytes (Kristian).
- Update commit log and add a comment in the code explaining
why we use cacheline size (Ben).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
v2:
- Set the value to 16 and drop the comment. (Kristian)
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This makes sure that user is still able to query properties about
variables that have gotten packed by lower_packed_varyings pass.
Fixes following OpenGL ES 3.1 test:
ES31-CTS.program_interface_query.separate-programs-vertex
v2: fix 'name included in packed list' check (Ilia Mirkin)
v3: iterate over instances of name using strtok_r (Ilia Mirkin)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
This is required to store information about packed varyings, currently
these variables get lost and cannot be retrieved later in sensible way
for program interface queries. List will be utilized by next patch.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
Move API validation to _mesa_validate_DispatchCompute in
api_validate.c.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
If the immutable compressed texture didn't have the full mip pyramid,
this didn't work, because it tried to generate mip levels for non-existing
levels. _mesa_prepare_mipmap_level() would correctly handle this by returning
FALSE if the mip level didn't exist, however we actually created the
non-existing mip level right before that because we used _mesa_get_tex_image()
before calling _mesa_prepare_mipmap_level(). It would then proceed to crash
(we allocated the mip level, which is a bad idea on an immutable texture,
but didn't initialize the values, leading to assertion failures or segfaults).
Fix this by using _mesa_select_tex_image() instead and call it after
_mesa_prepare_mipmap_level(), as that function will allocate missing mip levels
for non-immutable textures already.
This fixes a (2 year old) crash with astromenace which was hack-fixed in ubuntu
packages instead: http://bugs.debian.org/718680 (I guess most apps do full mip
chains - I believe this app not doing it is actually unintentional, always one
level less than full mip chain...).
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
... with only ARB_shader_atomic_counters.
I expected to see interactions with ARB_tessellation_shader in the
ARB_shader_atomic_counters spec, but they do not exist. It seems that we
should unconditionally expose these variables in the presence of
ARB_shader_atomic_counters:
gl_MaxTessControlAtomicCounters
gl_MaxTessEvaluationAtomicCounters
This partially reverts commit da7adb99e8. The commit also affected
gl_MaxTessControlImageUniforms and gl_MaxTessEvaluationImageUniforms
similarly but the ARB_shader_image_load_store spec does list an
interaction with ARB_tessellation_shader.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92095
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Without this commit, copy propagation is discarded if it involves
a uniform with an instruction that has 3 sources. But 3 sourced
instructions can access scalar values.
For example, this is what vec4_visitor::fix_3src_operand() is already
doing:
if (src.file == UNIFORM && brw_is_single_value_swizzle(src.swizzle))
return src;
Shader-db results (unfiltered) on NIR:
total instructions in shared programs: 6259650 -> 6241985 (-0.28%)
instructions in affected programs: 812755 -> 795090 (-2.17%)
helped: 7930
HURT: 0
Shader-db results (unfiltered) on IR:
total instructions in shared programs: 6445822 -> 6441788 (-0.06%)
instructions in affected programs: 296630 -> 292596 (-1.36%)
helped: 2533
HURT: 0
v2:
- Updated commit message, using Matt Turner suggestions
- Move the check after we've created the final value, as Jason
Ekstrand suggested
- Clean up the condition
v3:
- Move the check back to the original place, to keep things
tidy, as suggested by Jason Ekstrand
v4:
- Fixed missing is_single_value_swizzle() as pointed by Jason Ekstrand
Reviewed-by: Matt Turner <mattst88@gmail.com>
