The GLX extension lets you expose visuals that explicitly guarantee you
that the GL_FRAMEBUFFER_SRGB_CAPABLE flag will be set, but we can set
the flag even while the visual doesn't provide the guarantee. This
appears to be consistent with other implementations, as we've seen
several apps now that don't require an srgb visual and assume sRGB will
work without checking the GL_FRAMEBUFFER_SRGB_CAPABLE flag.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55783
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60633
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Now that we have W-tiled S8, we can't just region_map and poke at bits --
there has to be some swizzling. Rely on intel_miptree_map to get that job
done. This should also get the highest performance path we know of for the
mapping (interesting if I get around to finishing movntdqa some day).
v2: Fix stale name of the bit in a comment.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I want to reuse intel_miptree_map() to replace some region mapping that's
broken for separate stencil, but doing so would result in new demands on
ETC transcode that we actually don't want to happen.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Any driver can implement this simple and efficient optimization.
Team Fortress 2 hits it always. The DISCARD_RANGE codepath is not even used
with TF2 anymore, so we avoid a ton of useless buffer copies.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: cosmetic changes based on Brian's review
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch. (the next patch depends on it)
The states were split because we thought it caused a hardlock. Now we know
the hardlock was caused by something else and has since been fixed.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
This doesn't fix any issue we know of, but there indeed is a week spot
in draw_vbo where streamout can fail. After streamout is enabled,
the need_cs_space call can flush the context, which causes the streamout
to be disabled right after it was enabled and bad things happen.
One way to fix it is to atomize the beginning part, so that no context flush
can happen between streamout enabling and the first drawing.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Without this set, dri_util.c:dri2CreateContextAttribs
will reject requests to create a context with
__DRI_API_OPENGL_CORE.
This prevents a 3.2 core profile context from being created
even when MESA_GL_OVERRIDE_VERSION=3.2 is used.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If the override is version is >= 3.1, then update the
max_gl_core_version. Otherwise, update max_gl_compat_version.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow other code to get access to the override
version before a context is available.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Although GLSL 1.50 compiler support is not available,
this change will allow MESA_GLSL_VERSION_OVERRIDE=150 to be
used while 1.50 support is being developed.
Since no drivers claim 1.50 GLSL support, this change should
only impact Mesa when MESA_GLSL_VERSION_OVERRIDE=150 is set.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Immediate operands can only be src2 in 2-source instructions. Fixes
piglit failures since 0a1d145e (oops!).
Spotted-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The field was equivalent to (etc_format != MESA_FORMAT_NONE), and
therefore duplicate information.
This patch removes field and replaces all references to it with
`etc_format != MESA_FORMAT_NONE`.
No Piglit ETC test regresses on Intel Sandybridge.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
v2 [mattst88]:
- Add BRW_OPCODE_LRP to list of CSE-able expressions.
- Fix op_var[] array size.
- Rename arguments to emit_lrp to (x, y, a) to clear confusion.
- Add LRP function to brw_fs.cpp/.h.
- Corrected comment about LRP instruction arguments in emit_lrp.
v3 [mattst88]:
- Duplicate MAD code for LRP instead of using a function pointer.
- Check for != GRF instead of == IMM in emit_lrp.
- Lower LRP on gen < 6.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
1
Like MAD, this is another three-source instruction.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Many GPUs have an instruction to do linear interpolation which is more
efficient than simply performing the algebra necessary (two multiplies,
an add, and a subtract).
Pattern matching or peepholing this is more desirable, but can be
tricky. By using an opcode, we can at least make shaders which use the
mix() built-in get the more efficient behavior.
Currently, all consumers lower ir_triop_lrp. Subsequent patches will
actually generate different code.
v2 [mattst88]:
- Add LRP_TO_ARITH flag to ir_to_mesa.cpp. Will be removed in a
subsequent patch and ir_triop_lrp translated directly.
v3 [mattst88]:
- Move changes from the next patch to opt_algebraic.cpp to accept
3-src operations.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we had separate constructors for one, two, and four operand
expressions. This patch consolidates them into a single constructor
which uses NULL default parameters.
The unary and binary operator constructors had assertions to verify that
the caller supplied the correct number of operands for the expression,
but the four-operand version did not. Since get_num_operands for
ir_quadop_vector returns the number of vector_elements, we can safely
add that without breaking the semantics of ir_quadop_vector.
This also paves the way for expressions with three operands. Currently,
none can be constructed since get_num_operands() never returns 3.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
total instructions in shared programs: 346873 -> 346847 (-0.01%)
instructions in affected programs: 364 -> 338 (-7.14%)
(All affected shaders are from Lightsmark)
Reviewed-by: Eric Anholt <eric@anholt.net>
Gen6 has write-only MRF registers, and for ease of implementation we
paritition off 16 general purposes registers to act as MRFs on Gen7.
Knowing that our Gen7 MRFs are actually GRFs, we can do things we can't
do with real MRFs:
- read from them;
- return values directly to them from a send instruction; and
- compute directly to them with math instructions.
Reviewed-by: Eric Anholt <eric@anholt.net>
This requirement was added by ARB_fragment_program
When the Steam overlay is enabled, this fixes:
* Menu corruption with the Puddle game
* The screen going black on Rochard when
the Steam overlay is accessed
NOTE: This is a candidate for the 9.0 and 9.1 branches.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This work around disable hyperz if write to zbuffer is disabled. Somehow
using hyperz when not writting to the zbuffer trigger GPU lockup. See :
https://bugs.freedesktop.org/show_bug.cgi?id=60848
Candidate for 9.1
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Motivated by wanting to see if GenTextures was called by an
application while debugging another Steam overlay issue.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Now that buffers can be used as textures or render targets
make sure they aren't skipped.
Fix suggested by Jose Fonseca.
v2: added a couple of assertions so we can actually guarantee
we check the resources and don't skip them. Also added some comments
that this is actually a lie due to the way the opengl buffer api works.
Unfortunately not usable from OpenGL, and no cap bit.
Pretty similar to a 1d texture, though allows specifying a start element.
v2: also fix up renderbuffer width (which will get promoted to fb width)
to be the number of elements
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For PIPE_BUFFER we need coord adjustments for the transfer.
And for pure integer formats util_pack_color just crashes,
need to handle that differently due to clear colors being ints/uints.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Use a single sampler adapter instead of per-sampler-unit samplers,
and just pass along texture unit and sampler unit in the calls.
The reason is that for dx10-style sample opcodes pre-wired
samplers including all the texture state aren't really feasible (and for
sample_i/sviewinfo we don't even have samplers).
Of course right now softpipe doesn't actually do anything more than
just look up all its pre-wired per-texunit/per-samplerunit sampler as
it did before so this doesn't really achieve much except one more
function call, however this is now all softpipe's fault (fixing that in
a way which doesn't suck is still an unsolved problem).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
glXCreateWindow() and glXCreatePbuffer() always fail when built without
GLX_DIRECT_RENDERING defined since commit 48331047.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fixes resource leak defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Normally the application will own the main event queue and be responsible
for moving events. In case of EGL_DEFAULT_DISPLAY, EGL opens the display
and has to own the main queue so it can move the events itself.
Call wl_display_dispatch_pending() to take ownership.
