Also avoid double-adding the *sampler2DMS types when the array ext is
enabled.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
I can't tell whether this actually matters, but we're creating function
signatures with this predicate, so it should probably match when SSBO's
are available.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Oddly a bunch of the features it adds are actually from ESSL 3.20. But
the spec is quite clear, oh well.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This allows us to simplify the code and drop InterfaceBlockStageIndex
which is a per stage array of integers the size of all blocks in the
program combined including duplicates across stages. Adding a stage
ref per block will use less memory.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This changes the code to use the buffer counts stored for each stage
rather than counting from scratch. It also moves the checks outside
of the for loop which means we now just get a single link error
message if we go over the max rather than X error messages where X
is the number we have exceeded the max by.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow us to use them when checking resources in a
following patch and clean up a bunch of code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since 8683d54d2b there is now a single instance of the buffer
block information that needs to be updated rather than one instance
for each stage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With SSO, the GL_PROGRAM_INPUT and GL_PROGRAM_OUTPUT interfaces refer to
the first and last shader stage linked into a program. This may not be
the vertex and fragment shader stages.
So, subtracting VERT_ATTRIB_GENERIC0 and FRAG_RESULT_DATA0 is bogus.
We need to subtract VERT_ATTRIB_GENERIC0 for VS inputs,
FRAG_RESULT_DATA0 for FS outputs, and VARYING_SLOT_VAR0 for other cases.
Note that built-in variables get a location of -1.
Fixes 4 dEQP-GLES31.functional.program_interface_query tests:
- program_input.location.separable_fragment.var_explicit_location
- program_input.location.separable_fragment.var_array_explicit_location
- program_output.location.separable_vertex.var_array_explicit_location
- program_output.location.separable_vertex.var_array_explicit_location
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
We were recording locations for all variables, even ones without an
explicit location set. Implement the rules from the spec, and record
-1 in the resource list accordngly. Make program_resource_location
stop doing math on negative values. Remove hacks that are no longer
necessary now that we've stopped doing that.
Fixes 4 dEQP-GLES31.functional.program_interface_query tests:
- program_input.location.separable_fragment.var
- program_input.location.separable_fragment.var_array
- program_output.location.separable_vertex.var_array
- program_output.location.separable_vertex.var_array
v2: Delete more code
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
A program will either have gl_VertexID or gl_VertexIDMESA (the lowered
zero-based version), not both. Just spoof it in the resource list so
the hacks are done in a single place.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
System values are just built-in input variables that we've opted to
special-case out of convenience. We need to consider all inputs,
regardless of how we've classified them.
Unfortunately, there's one exception: we shouldn't add gl_BaseVertex
unless ARB_shader_draw_parameters is enabled, because it doesn't
actually exist in the language, and shouldn't be counted in the
GL_ACTIVE_RESOURCES query.
Fixes dEQP-GLES31.functional.program_interface_query.program_input.
resource_list.compute.empty, which expects gl_NumWorkGroups to appear
in the resource list.
v2: Delete more code
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
This makes no sense. If the stage being considered is the vertex
shader, then we'll add inputs and system values appropriately.
If we're not considering the vertex shader, then we absolutely should
not do anything with it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
add_interface_variables() is supposed to add variables for the inputs of
the first shader stage linked into a program, and the outputs of the
last shader stage linked into a program.
From the ARB_program_interface_query specification:
"* PROGRAM_INPUT corresponds to the set of active input variables used by
the first shader stage of <program>. If <program> includes multiple
shader stages, input variables from any shader stage other than the
first will not be enumerated.
* PROGRAM_OUTPUT corresponds to the set of active output variables
(section 2.14.11) used by the last shader stage of <program>. If
<program> includes multiple shader stages, output variables from any
shader stage other than the last will not be enumerated."
Previously, we used build_stageref here, which walks over all linked
shaders in the program. This meant that internal varyings would be
visible. We don't actually need any of build_stageref's code: we
already explicitly skip packed varyings, handle modes, and the name
comparisons just do a fuzzy string comparison of name with itself.
Fixes two tests: dEQP-GLES31.functional.program_interface_query.
program_{input,output}.referenced_by.referenced_by_vertex_fragment.
These tests have a VS and FS linked together into a single program.
Both stages have an input called "shaderInput". But the FS input
should not be visible because it isn't the first stage.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
This is a bitfield of which stages refer to a variable. It is not used
to mask off bits. In fact, it's used to contribute additional bits.
Rename it and tidy a bit of the logic.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
add_interface_variables is supposed to add variables from either the
first or last stage of a linked shader. But it has no way of knowing
the stage it's being asked to process, which makes it impossible to
produce correct stagerefs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
If the GL_ARB_shader_draw_parameters extension is enabled, we'll already
have a gl_BaseVertex variable. It will have var->how_declared set to
ir_var_declared_implicitly, and will appear in the program resource
list.
If not, we make one for internal use. We don't want it to be listed
in the program resource list, as the application won't be expecting
it. Marking it hidden will properly exclude it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
We occasionally generate variables internally that we want to exclude
from the program resource list, as applications won't be expecting them
to be present.
The next patch will make use of this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Note: This patch appears to violate older OpenGL and OpenGLES specs.
The OpenGLES GLSL 3.1 and OpenGL GLSL 4.3 specifications both remove
the requirement for the output and input centroid qualifiers to match.
The deqp
dEQP-GLES3.functional.shaders.linkage.varying.rules.differing_interpolation_2
test wants the newer OpenGLES 3.1 specification behavior, even for
OpenGLES 3.0. This patch simply removes the checking in all cases.
The OpenGLES 3.0 conformance test suite doesn't appear to require the
older ("must match") spec behavior.
For reference, here are the relavent spec citations:
The OpenGL 4.2 spec says: "the last active shader stage output
variables and fragment shader input variables of the same name must
match in type and qualification (other than out matching to in)"
The OpenGL 4.3 spec says: "interpolation qualification (e.g., flat)
and auxiliary qualification (e.g. centroid) may differ."
The OpenGLES GLSL 3.00.4 specification says: "The output of the
vertex shader and the input of the fragment shader form an
interface. For this interface, vertex shader output variables and
fragment shader input variables of the same name must match in type
and qualification (other than precision and out matching to in)."
The OpenGLES GLSL 3.10 Specification says: "interpolation
qualification (e.g., flat) and auxiliary qualification (e.g.
centroid) may differ"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92743
Bugzilla: https://cvs.khronos.org/bugzilla/show_bug.cgi?id=7819
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It used to be in nir_gather_info.c until I moved it out to nir.h so it
could be re-used with some linking code that never got merged. We'll move
it back out if and when we have real code to share it with.
Just noticed this in passing.. gl_shader_stage already has tess so this
comment no longer applies.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Needed because not all the built-in variables are marked as system
values, so they still have the mode ir_var_auto. Right now it fixes
raising the warning when gl_GlobalInvocationID and
gl_LocalInvocationIndex are used.
v2: use is_gl_identifier instead of filtering for some names (Ilia
Mirkin)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Oddly, this did not affect the shader where I first noticed the pattern.
That particular shader doesn't get its if-statement converted to a bcsel
because there are two assignments in the else-statement. This led to me
submitting https://bugs.freedesktop.org/show_bug.cgi?id=94747.
shader-db results:
Sandy Bridge
total instructions in shared programs: 8467384 -> 8467069 (-0.00%)
instructions in affected programs: 36594 -> 36279 (-0.86%)
helped: 46
HURT: 0
total cycles in shared programs: 117573448 -> 117568518 (-0.00%)
cycles in affected programs: 339114 -> 334184 (-1.45%)
helped: 46
HURT: 0
Ivy Bridge / Haswell / Broadwell / Skylake:
total instructions in shared programs: 7774258 -> 7773999 (-0.00%)
instructions in affected programs: 30874 -> 30615 (-0.84%)
helped: 46
HURT: 0
total cycles in shared programs: 65739190 -> 65734530 (-0.01%)
cycles in affected programs: 180380 -> 175720 (-2.58%)
helped: 45
HURT: 1
No change on G45 or Ironlake.
I also tried these expressions, but none of them affected any shaders in
shader-db:
(('bcsel', a, 'a@bool', 'b@bool'), ('ior', a, b)),
(('bcsel', a, 'b@bool', False), ('iand', a, b)),
(('bcsel', a, 'b@bool', 'a@bool'), ('iand', a, b)),
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This enables in shader defined transform feedback mode even if the
only place xfb_stride is defined is on the global out.
We don't worry about xfb_buffer since Issue 22 c) in the spec says:
"If the shader has an "xfb_buffer" qualifier identifying a buffer,
but doesn't declare "xfb_offset" on anything associated with it,
what happens?
...
variables not qualified with "xfb_offset" are not captured, which
makes the associated "xfb_buffer" qualifier irrelevant."
Reviewed-by: Dave Airlie <airlied@redhat.com>
When we move to the next buffer we need to reset the stream
so that we don't generate an error message about streams not
matching.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This moves the check until after we have done the stride
calculation and applies it to the xfb_* qualifiers.
Reviewed-by: Dave Airlie <airlied@redhat.com>
From the ARB_enhanced_layous spec:
"It is a compile-time or link-time error to have any *xfb_offset*
that overflows *xfb_stride*, whether stated on declarations before
or after the *xfb_stride*, or in different compilation units.
...
When no *xfb_stride* is specified for a buffer, the stride of a
buffer will be the smallest needed to hold the variable placed at
the highest offset, including any required padding."
Reviewed-by: Dave Airlie <airlied@redhat.com>
