Stop using brw_compiler to lower the final binding table indices for
surface access. This is done by simply not setting the
'prog_data->binding_table.*_start' fields. Then make the driver
perform this lowering.
This is a better place to perfom the binding table assignments, since
the driver has more information and will also later consume those
assignments to upload resources.
This also prepares us for two changes: use ibc without having to
implement binding table logic there; and remove unused entries from
the binding table.
Since the `block` field in brw_ubo_range now refers to the final
binding table index, we need to adjust it before using to index
shs->constbuf.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We'll change iris to perform lowering of the binding table indices
earlier (before the backend kick in), but the backend compiler uses
the result of the analysis to identify load_ubo intrinsics, so we do
the analysis after the lowering to have the right indices.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15306230 -> 15304726 (<.01%)
instructions in affected programs: 4570 -> 3066 (-32.91%)
helped: 16
HURT: 0
total cycles in shared programs: 361703436 -> 361680041 (<.01%)
cycles in affected programs: 129388 -> 105993 (-18.08%)
helped: 16
HURT: 0
LOST: 0
GAINED: 2
The helped programs were in XCom 2, Deus Ex: Mankind Divided, and Kerbal
Space Program
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It will be true for the constant/system value buffer because they use a
constant zero but it's not true in general. If we ever got here when
the source wasn't constant, nir_src_as_uint would assert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Jason pointed out that we don't need to keep an entire copy of the
serialized NIR around, we just need the SHA1. This does change our
disk cache key to be taking a SHA1 of a SHA1, which is a bit odd,
but should work out and be faster and use less memory.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We were checking this based on nir->info.name, but with the shader
cache enabled, nir_strip throws out the name, causing us to use IEEE
mode for ARB programs.
gl-1.0-spot-light regressed because it wants ALT mode for 0^0 behavior.
Fixes: dc5dc727d5 iris: Serialize the NIR to a blob we can use for shader cache purposes.
We will use a hash of the serialized NIR together with brw_prog_*_key
(for NOS) as the disk cache key, where the disk cache contains actual
assembly shaders.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It had been internal to iris_program.c, but with the upcoming disk cache
code, the "program module" is going to be spread across a couple source
files. Into a header it goes!
Now it lives alongside iris_compiled_shader, which makes sense.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Our tessellation control shaders can be dispatched in several modes.
- SINGLE_PATCH (Gen7+) processes a single patch per thread, with each
channel corresponding to a different patch vertex. PATCHLIST_N will
launch (N / 8) threads. If N is less than 8, some channels will be
disabled, leaving some untapped hardware capabilities. Conditionals
based on gl_InvocationID are non-uniform, which means that they'll
often have to execute both paths. However, if there are fewer than
8 vertices, all invocations will happen within a single thread, so
barriers can become no-ops, which is nice. We also burn a maximum
of 4 registers for ICP handles, so we can compile without regard for
the value of N. It also works in all cases.
- DUAL_PATCH mode processes up to two patches at a time, where the first
four channels come from patch 1, and the second group of four come
from patch 2. This tries to provide better EU utilization for small
patches (N <= 4). It cannot be used in all cases.
- 8_PATCH mode processes 8 patches at a time, with a thread launched per
vertex in the patch. Each channel corresponds to the same vertex, but
in each of the 8 patches. This utilizes all channels even for small
patches. It also makes conditions on gl_InvocationID uniform, leading
to proper jumps. Barriers, unfortunately, become real. Worse, for
PATCHLIST_N, the thread payload burns N registers for ICP handles.
This can burn up to 32 registers, or 1/4 of our register file, for
URB handles. For Vulkan (and DX), we know the number of vertices at
compile time, so we can limit the amount of waste. In GL, the patch
dimension is dynamic state, so we either would have to waste all 32
(not reasonable) or guess (badly) and recompile. This is unfortunate.
Because we can only spawn 16 thread instances, we can only use this
mode for PATCHLIST_16 and smaller. The rest must use SINGLE_PATCH.
This patch implements the new 8_PATCH TCS mode, but leaves us using
SINGLE_PATCH by default. A new INTEL_DEBUG=tcs8 flag will switch to
using 8_PATCH mode for testing and benchmarking purposes. We may
want to consider using 8_PATCH mode in Vulkan in some cases.
The data I've seen shows that 8_PATCH mode can be more efficient in
some cases, but SINGLE_PATCH mode (the one we use today) is faster
in other cases. Ultimately, the TES matters much more than the TCS
for performance, so the decision may not matter much.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I was setting it based off a pipe_rasterizer_state field that appears
to be entirely dead outside of the draw module respecting it.
I should be setting it when the primitive type reaching the SF is
neither points nor lines. This is, unfortunately, rather dirty,
as we have to look at the rasterizer state, the geometry shader state,
the tessellation evaluation shader state, and the primitive type...
Order of operations is important, otherwise we'll find the program we
just uploaded as the "old" compile and get confused why nothing is
different between the two keys.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
I was lazy earlier and hadn't bothered typing / refactoring this.
Now I'm hitting some extra recompiles and would like to see why.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: handle atomics as well
make use of nir_rewrite_image_intrinsic
v3: remove call to nir_remove_dead_derefs
v4: (Timothy Arceri) dont actually call lowering yet
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v3)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
While playing with compute shaders, I was getting a random crash,
noticed that bind_state was using the old shader info for comparision,
but gallium allows the shader to be deleted while bound, so this could
lead to a use after free.
This can't happen using the cso cache. As it tracks all of this.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently initialized only if 'ish' is non-NULL.
CID: 1444106
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
1. If we switch the TCS for one with a different number of output
vertices, then the TES's gl_PatchVerticesIn value will change.
We need to re-upload in this case. For now, re-emit constants
whenever the TCS/TES are swapped out.
2. If there is no TCS, then we can't grab gl_PatchVerticesIn from
the TCS info. Since it's a passthrough, we can just use the
primitive's patch count (like the TCS gl_PatchVerticesIn does).
Fixes KHR-GL45.tessellation_shader.single.max_patch_vertices and
KHR-GL45.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that we've added a system value uploading mechanism, we may as well
reuse the same system for default tessellation levels. This simplifies
the state upload code a bit.
Also fixes:
KHR-GL45.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_tessLevel
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Gallium might call us multiple times to bind subsets of the samplers,
at which point we'd recreate the table a bunch of times. It doesn't
really buy us anything to do it here - even if we defer to draw time,
the dirty tracking ensures we'll only do it on the first draw after a
bind_sampler_states() call.
We now use the number of samplers specified by the shader instead of
the binding count. If this number changes, we flag sampler state as
dirty so we re-upload a table with the right number of entries.
This also fixes a bug where ice->state.need_border_colors was never
unset, so once something needed border colors, the pool would always
be pinned in all future batches.
v2: Explicitly flag sampler states as dirty, rather than assuming that
bind_sampler_states() will be called if the program texture count
changes. While this may be true for st/mesa, it isn't the case for
Gallium HUD.
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Gallium Nine state tracker now works on iris.
Also tested with GALLIUM_HUD and Star Wars: Knights of the Old
Republic on WINE (GL_ATI_fragment_shader).
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If Vertex Shader uses EdgeFlag the hardware request that it is setup
as the last VERTEX_ELEMENT_STATE. If SGVS are add at draw time we
need to also reconfigure the last 3DSTATE_VF_INSTANCING so its
VertexElementIndex points to the new Vertex Element that contains
the EdgeFlag.
So if draw parameters or edgeflag are not used the CSO generated at
iris_create_vertex_element is sent directly in the batches. But if
edge flag is used we adjust last VERTEX_ELEMENT_STATE and
last 3DSTATE_VF_INSTANCING using their alternative edge flag version
we generate at iris_create_vertex_element and store at the CSO.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of trusting the caller to already have created a softfp64
function shader and added all its functions to our shader, we simply
take the softfp64 shader as an argument and do the function inlining
ouselves. This means that there's no more nasty functions lying around
that the caller needs to worry about cleaning up.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Additional VERTEX_ELEMENT_STATE are used to store basevertex and
baseinstance and drawid updating the DWordLength of the
3DSTATE_VERTEX_ELEMENTS command.
This passes all piglit tests for spec.*draw_parameters.* tests
and VK-GL-CTS KHR-GL45.shader_draw_parameters_tests.* tests.
Now we only mark a dirty_update when parameters are changed or
when we have an indirect draw.
We enable PIPE_CAP_DRAW_PARAMETERS on Iris.
There is no edge flag support in the Vertex Elements setup.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This just moves the code for dealing with pipe_shader_state /
pipe_compute_state / iris_uncompiled_shader to the end of the file.
Now that those do precompiles, they want to call the actual compile
functions. Putting them at the end eliminates the need for a bunch
of prototypes.
Previously I had a hack in st/mesa to make it stop remapping
VARYING_SLOT_* into the naively compacted slots, which aren't
what we want. But that wasn't very feasible, as we'd have to
update all drivers, or add capability bits, and it gets messy fast.
It turns out that I can map back to VARYING_SLOT_* in about 5 LOC,
so let's just do that. It removes the need for hacks, and is easy.
This also fixes KHR-GL46.enhanced_layouts.xfb_capture_struct, which
apparently with my hack was still getting the wrong slot info.
In st_nir_lower_uniforms_to_ubo() all UBO access in the shader have
its index incremented to open room for uniforms in constbuf0. So if
we use UBOs, we always need to include the extra binding entry in the
table.
To avoid doing this checks both when compiling the shader and when
assigning binding tables, store the num_cbufs in iris_compiled_shader.
Fixes a bunch of tests from Piglit and CTS that use UBOs but don't use
uniforms or system values. Note that some tests fitting this criteria
were passing because the UBOs were moved to be push
constants (avoiding the problem).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There are a variety of ways to fix this, many of which are simple, but
I could use some advice on which ones other people prefer, and so we'll
punt until after the holidays.
We were relying on CSE/GVN/etc to coalesce all intrinsics that load the
same value, but that's a bad idea. We might have a couple intrinsics
that reload the same value. If so, we only want to set up the uniform
on the first one we see.
Gen9-10 have fewer than 4 subslices per slice, so they need this to be
rounded up. Gen11 isn't documented as needing this hack, and it can
also have more than 4 subslices, so the hack actually can break things.
Fixes tests/spec/arb_enhanced_layouts/execution/component-layout/
sso-vs-gs-fs-array-interleave
This exposes iris_upload_shader() without having to bind it, which will
be useful for precompiles. It also lets us examine the old programs and
flag dirty bits at a higher level, rather than cramming all that
knowledge into the cache layer.
