Leaving the unused registers with other values caused assertion
failures and other problems in places that blindly iterate over all
sources.
brw_vs_emit.c:1381: get_src_reg: Assertion `c->regs[file][index].nr !=
0' failed.
Fixes i965 piglit:
vs-uniform-array-mat[234]-col-row-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-uniform-array-mat[234]-index-row-rd
vs-uniform-mat[234]-col-row-rd
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit fbeb68e880)
This fixes many cases of accessing arrays of matrices using
non-constant indices at each level.
Fixes i965 piglit:
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
Fixes swrast piglit:
fs-temp-array-mat[234]-index-col-rd
fs-temp-array-mat[234]-index-col-row-rd
fs-temp-array-mat[234]-index-col-wr
fs-uniform-array-mat[234]-index-col-rd
fs-uniform-array-mat[234]-index-col-row-rd
fs-varying-array-mat[234]-index-col-rd
fs-varying-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-rd
vs-varying-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d6e1a8f714)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 601428d2bb)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Fixes i965 piglit:
fs-temp-array-mat[234]-col-row-wr
fs-temp-array-mat[234]-index-col-row-wr
fs-temp-array-mat[234]-index-col-wr
fs-temp-array-mat[234]-index-row-wr
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 5f83dfe5b7)
The previous implementation could easily get tricked if the LHS of an
assignment included a non-constant index that was "inside" another
dereference. For example:
mat4 m[2];
m[0][i] = vec4(0.0);
Due to the way it tracked whether the array was being assigned, it
would think that the non-constant index was in an r-value. The new
code fixes that by tracking l-values and r-values differently. The
index is also replaced by cloning the IR and replacing the index
variable instead of the odd way it was done before.
v2: Apply some simplifications suggested by Eric Anholt. Making
assignment_generator::rvalue be ir_dereference instead of ir_rvalue
simplified the code a bit.
Fixes i965 piglit fs-temp-array-mat[234]-index-wr and
vs-varying-array-mat[234]-index-wr.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34691
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 1731ac3086)
To make bisects work, this also squashes in:
glsl: Correctly return progress from lower_variable_index_to_cond_assign
lower_variable_index_to_cond_assign runs until it can't make any more
progress. It then returns the result of the last pass which will
always be false. This caused the lowering loop in
_mesa_ir_link_shader to end before doing one last round of
lower_if_to_cond_assign. This caused several if-statements (resulting
from lower_variable_index_to_cond_assign) to be left in the IR.
In addition to this change, lower_variable_index_to_cond_assign should
take a flag indicating whether or not it should even generate
if-statements. This is easily controlled by
switch_generator::linear_sequence_max_length. This would generate
much better code on architectures without any flow contol.
Fixes i915 piglit regressions glsl-texcoord-array and
glsl-fs-vec4-indexing-temp-src.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c1e591eed4)
Other code will soon need to know if an array needs lowering based
exclusively on the storage mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d2296e784a)
There's no reason for it to be there, and another class that may not
have access to the visitor will need it soon.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8d5f3cef79)
The GLSL 1.20 and later specs say:
"Recursion is not allowed, not even statically. Static recursion is
present if the static function call graph of the program contains
cycles."
Recursion is detected and rejected both a compile-time and at
link-time. The complie-time check happens to detect some cases that
may be removed by various optimization passes. The spec doesn't seem
to allow this, but other vendors (e.g., NVIDIA) appear to only check
at link-time after all optimizations.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33885
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 02c5ae1b3f)
This also squashes in the following commit to make sure that bisects
in scons builds work:
glsl: Add ir_function_detect_recursion.cpp to SConscript.
(cherry picked from commit 76bccaff0c)
Also clarify the documentation for one of the parameters.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1ad3ba4ad9)
u_vbuf_upload_buffers modifies the buffer offsets. If they are not
restored, and any of the vertex formats is not supported natively, the
next u_vbuf_mgr_draw_begin call will translate the vertex buffers with
incorrect buffer offsets.
(cherry picked from commit afc160e1c8)
Signed-off-by: Marek Olšák <maraeo@gmail.com>
In a rare case of building gallium only, we need to
check if the required packages are available
libdrm_[intel|nouveau] - gallium[i915 i965|nouveau]
v2: r300g and r600g do not need libdrm_radeon
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
(cherry picked from commit c2426bbf86)
Conflicts:
configure.ac
ES 2.0.25 page 127 says:
If the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE is NONE, then
querying any other pname will generate INVALID_ENUM.
See also:
b9e9df78a0
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 000896c0bb)
The behavior of flushes in the hardware is a maze of twisty passages,
and strangely the VS constants appear to be loaded during a pipeline
flush instead of at the time of the packet emit according to the
simulator. On moving the STATE_BASE_ADDRESS packet to where it really
needed to live (in order for data loads by other packets to be
correct), we sometimes no longer got a flush between those packets
where we apparently needed it. This replicates the flushes implied by
a STATE_BASE_ADDRESS update, fixing the GPU hangs in OGLC and the
"engine" demo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36821
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39257
Tested-by: Keith Packard <keithp@keithp.com> (bzflag and etracer fixed)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3e5d36267d)
There's scary stuff going on in PIPE_CONTROL internals, and if the
BSpec says to do this to make PIPE_CONTROL work, I'll go ahead and do
it because we'll probably never be able to debug it after the fact.
v2: Use stall at scoreboard instead of depth stall, as noted by Ken.
(cherry picked from commit 407785d0e9)
For this and occlusion queries, we're trying to avoid setting
I915_GEM_DOMAIN_RENDER for the write domain, because the data written
is definitely not going through the render cache, but we do need to
tell the kernel that the object has been written. However, with using
I915_GEM_DOMAIN_GTT, the kernel on retiring the batchbuffer sees that
the w/a BO has a write domain of GTT, and puts it on the flushing
list. If something tries to wait for that BO to finish rendering
(such as the AUB dumper reading the contents of BOs), we get into
wait_request (since obj->active) but with a 0 seqno (since the object
is on the flushing list, not actually on a ringbuffer), and BUG_ONs.
To avoid the kernel bug (which I'm hoping to delete soon anyway), just
use I915_GEM_DOMAIN_INSTRUCTION like occlusion queries do. This
doesn't result in more flushing, because we invalidate INSTRUCTION on
every batchbuffer now that we're state streaming, anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dc7422405f)
We were updating our new viewport using the old buffers' _WindowMap.m.
We can do less math and avoid using that deprecated matrix by just
folding the viewport calculation right in to the driver.
Fixes piglit fbo-depthtex.
(cherry picked from commit debf751aea)
i915_update_draw_buffers() already handles the fallback bit for
missing stencil region, so here we just need to handle whether the GL
thinks we have stencil data or not (and disable the test if so).
(cherry picked from commit 79fee3a76b)
We were disabling it once at the moment we changed draw buffers, but
later enabling of depth test could turn it back on. Fixes
fbo-nodepth-test.
Note that ctx->DrawBuffer has to be checked because during context
create we get called while it's still unset. However, we know we'll
get an intel_draw_buffer() after that, so it's safe to make a silly
choice at this point.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30080
(cherry picked from commit fc4fba52cf)
The illusion of shared code here wasn't fooling anybody. It was
tempting to keep i830 and i915 still shared, but I think I actually
want to make them diverge shortly.
Reviewed-by: Chad Versace <chad@chad-versace.us>
(cherry picked from commit f34ec6169d)
Instead of using a chain of manually maintained if/else blocks to
handle "#extension" directives, we now consult a table that specifies,
for each extension, the circumstances under which it is available, and
what flags in _mesa_glsl_parse_state need to be set in order to
activate it.
This makes it easier to add new GLSL extensions in the future, and
fixes the following bugs:
- Previously, _mesa_glsl_process_extension would sometimes set the
"_enable" and "_warn" flags for an extension before checking whether
the extension was supported by the driver; as a result, specifying
"enable" behavior for an unsupported extension would sometimes cause
front-end support for that extension to be switched on in spite of
the fact that back-end support was not available, leading to strange
failures, such as those in
https://bugs.freedesktop.org/show_bug.cgi?id=38015.
- "#extension all: warn" and "#extension all: disable" had no effect.
Notes:
- All extensions are currently marked as unavailable in geometry
shaders. This should not have any adverse effects since geometry
shaders aren't supported yet. When we return to working on geometry
shader support, we'll need to update the table for those extensions
that are available in geometry shaders.
- Previous to this commit, if a shader mentioned
ARB_shader_texture_lod, extension ARB_texture_rectangle would be
automatically turned on in order to ensure that the types
sampler2DRect and sampler2DRectShadow would be defined. This was
unnecessary, because (a) ARB_shader_texture_lod works perfectly well
without those types provided that the builtin functions that
reference them are not called, and (b) ARB_texture_rectangle is
enabled by default in non-ES contexts anyway. I eliminated this
unnecessary behavior in order to make the behavior of all extensions
consistent.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 3097715d41)
These were previously 1-bit-wide bitfields. Changing them to bools
has a negligible performance impact, and allows them to be accessed by
offset as well as by direct structure access.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9c4445de6e)
This is a squash cherry pick commit of:
glsl: Find the "closest" signature when there are multiple matches.
Previously, ir_function::matching_signature had a fatal bug: if a
function had more than one non-exact match, it would simply return NULL.
This occured, for example, when looking for max(uvec3, uvec3):
- max(vec3, vec3) -> score 1 (found first)
- max(ivec3, ivec3) -> score 1 (found second...used to return NULL here)
- max(uvec3, uvec3) -> score 0 (exact match...the right answer)
This did not occur for max(ivec3, ivec3) since the second match found
was an exact match.
The new behavior is to return a match with the lowest score. If there
is an exact match, that will be returned. Otherwise, a match with the
least number of implicit conversions is chosen.
Fixes piglit tests max-uvec3.vert and glsl-inexact-overloads.shader_test.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 60eb63a855)
glsl: Suppress warning from matching_signature change.
gcc isn't smart enough to see that we only look at matched_score after
we've initialized it (because match != NULL happens at the same time)
(cherry picked from commit b043409adf)
glsl: Reject ambiguous function calls (multiple inexact matches).
According to the GLSL 1.20 specification, "it is a semantic error if
there are multiple ways to apply [implicit] conversions [...] such that
the call can be made to match multiple signatures."
Fixes a regression caused by 60eb63a855,
which implemented the wrong policy of finding a "closest" match.
However, this is not a revert, since the original code failed to
continue looking for an exact match once it found two inexact matches.
It's OK to have multiple inexact matches if there's also an exact match.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38971
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7304909d65)
