Some more of the files are now autogenerated, this caused build breakage,
patch adds generation of these missing files. Patch also changes existing
make so that the files are created to be part of the local source
(not intermediate directory, this causes several problems).
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
This patch fixes a copy/paste error and masking of depth/stencil (stencil
is in the top 8 bits), and makes glean/readPixSanity happy.
Both the stencil and the depth buffer piglit test also pass if
glClear(DEPTH | STENCIL) is executed instead of
glClear(DEPTH)/glClear(STENCIL).
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Christopher Egert <cme3000@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
remove archaic .cvsignore
*.pyo is already in toplevel .gitignore
*.pyc is already in toplevel .gitignore
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, blits using the "blorp" mechanism only worked for 8-bit
RGBA color buffers, 24-bit depth buffers, and 8 bit stencil buffers.
This was not enough, because the blorp mechanism must be used for
blitting whenever MSAA is in use. This patch allows all formats to be
used, provided the source and destination formats match.
So far I have confirmed that the following formats work properly with
MSAA:
- GL_RGB
- GL_RGBA
- GL_ALPHA
- GL_ALPHA4
- GL_ALPHA8
- GL_R3_G3_B2
- GL_RGB4
- GL_RGB5
- GL_RGB8
- GL_RGB10
- GL_RGB12
- GL_RGB16
- GL_RGBA2
- GL_RGBA4
- GL_RGB5_A1
- GL_RGBA8
- GL_RGB10_A2
- GL_RGBA12
- GL_RGBA16
Fixes piglit tests "EXT_framebuffer_multisample/formats {2,4}" on
Sandy Bridge and Ivy Bridge.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously the blorp engine only supported RGBA8 color buffers and
24-bit depth buffers. This patch adds support for any color buffer
format that is supported as a render target, and for 16-bit and 32-bit
depth buffers.
This required threading the brw_context struct through into
brw_blorp_surface_info::set() so that it can consult the
brw->render_target_format array.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Even though brw_blorp_surface_info is derived from brw_blorp_mip_info,
this function doesn't need to be virtual, because it is never accessed
through a base class pointer. Making the function non-virtual will
allow it to take additional parameters in the brw_blorp_surface_info
case.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch moves the responsibility for deciding on the format of the
source and destination surfaces from the
gen{6,7}_blorp_emit_surface_state() functions to
brw_blorp_surface_info::set(), which is shared between Gen6 and Gen7.
This will make it possible to add support for more surface formats
without code duplication.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
TGSI doesn't need an opcode, since registers are untyped (but beware
once doubles come into the scene). Mesa IR doesn't handle native
integers, so trying to handle them there is worthless, the case
entries are only added for warning reasons.
It was only tested with softpipe, since llvmpipe doesn't support glsl
1.3 yet.
Signed-off-by: Olivier Galibert <galibert@pobox.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
That adds support for activating the extension. It doesn't actually
*do* anything yet, of course.
Signed-off-by: Olivier Galibert <galibert@pobox.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
From the issues section of the GL_ARB_texture_compression_rgtc extension:
15) What should glGetTexLevelParameter return for
GL_TEXTURE_GREEN_SIZE and GL_TEXTURE_BLUE_SIZE for the RGTC1
formats? What should glGetTexLevelParameter return for
GL_TEXTURE_BLUE_SIZE for the RGTC2 formats?
RESOLVED: Zero bits.
These formats always return 0.0 for these respective components
and have no bits devoted to these components.
Returning 8 bits for red size of RGTC1 and the red and green
sizes of RGTC2 makes sense because that's the maximum potential
precision for the uncompressed texels.
Thus, we need to return 8 bits for GL_TEXTURE_RED_SIZE on all RGTC formats
and 8 bits for GL_TEXTURE_GREEN_SIZE on RGTC2 formats. BLUE should be 0.
Fixes oglconform/rgtc/advanced.texture_fetch.tex_param.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
While ~loop_state() is already freeing the loop_variable_state objects
via ralloc_free(this->mem_ctx), the ~loop_variable_state() destructor
was never getting called, so the hash table inside loop_variable_state
was never getting destroyed.
Fixes a memory leak in any shader with loops.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The functions for handling 1D, 2D and 3D texture images were nearly
identical. This folds them all together.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We can't remove this pass yet, because we need it to convert AMDIL
registers in BRANCH* instructions, but we don't need it for
instruction conversion any more.
OpenGL allows you to declare user-defined fragment shader outputs with
less than four components:
out ivec2 color;
This makes sense if you're rendering to an RG format render target.
Previously, we assumed that all color outputs had four components (like
the built-in gl_FragColor/gl_FragData variables). This caused us to
call emit_color_write for invalid indices, incrementing the output
virtual GRF's reg_offset beyond the size of the register.
This caused cascading failures: split_virtual_grfs would allocate new
size-1 registers based on the virtual GRF size, but then proceed to
rewrite the out-of-bounds accesses assuming that it had allocated enough
new (contiguously numbered) registers. This resulted in instructions
that accessed size-1 GRFs which register numbers beyond
virtual_grf_next (i.e. registers that were never allocated).
Finally, this manifested as live variable analysis and instruction
scheduling accessing their temporary array with an out of bounds index
(as they're all sized based on virtual_grf_next), and the program would
segfault.
It looks like the hardware's Render Target Write message requires you to
send four components, even for RT formats such as RG or RGB. This patch
continues to use all four MRFs, but doesn't bother to fill any data for
the last few, which should be unused.
+2 oglconforms.
NOTE: This is a candidate for stable release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 4650aea7a5 fixed texelFetchOffset()
on Ivybridge, but didn't update the Ironlake/Sandybridge code.
+18 piglits on Sandybridge.
NOTE: This and 4650aea7a5 are both candidates for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Commit f41ecade7b fixed texelFetchOffset()
on Ivybridge, but didn't update the Ironlake/Sandybridge code.
+15 piglits on Sandybridge.
NOTE: This and f41ecade7b are both candidates for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
