This has basically identical semantics to the pseudo-ext enum we were
using before. Also, now that it's in the actual Vulkan enum, we can get
rid of all the #pragma garbage to avoid compiler warnings.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18084>
Each logical device can point to its physical device intel_device_info
saving at least one intel_device_info.
This also allow us to set 'const' to avoid values in intel_device_info
being changed by mistake.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17897>
With the switch to common dynamic state tracking, something got lost
that made the scissors not always be emitted when they are not dynamic
and the pipeline is marked dirty.
Since both viewport and scissors make use of each other to calculate
their values, just stick the scissor emit in the same if block as
viewport for now.
I'd rather have them decoupled, and at least the Vulkan CTS didn't
complain when I tried it, but I don't know what other effects that
may have, especially when it comes to the guardband.
Fixes a bunch of tests under
dEQP-VK.pipeline.*.multisample.misc.*
Fixes: 7d25c04236 ("anv: Switch to using common dynamic state tracking")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17964>
v2: Drop ANV_PIPE_UNTYPED_DATAPORT_CACHE_FLUSH_BIT from invalidate bits (Lionel)
Add utrace support
Expand on comment about PIPE_CONTROL::UntypedDataPortCache
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16905>
Set write back L1 cache policy in STATE_BASE_ADDRESS instruction for A64
messages.
v2: Also set the value in genX_state.c (Lionel)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16905>
We're missing a condition that is currently papered over by having
ANV_PIPE_HDC_PIPELINE_FLUSH_BIT in the invalidate bits.
v2: rework with simplication (Caio)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16905>
Wa_14010455700 is dependent on the format and sample count, but our
code to track whether or not it had been applied was only dependent on
the format.
As a result, we failed to enable the workaround when an app used a D16
2xMSAA buffer, then a D16 1xMSAA buffer right afterwards.
Make the workaround tracking code sample-dependent to fix this.
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17859>
For one thing, we were deceptively setting it wrong in genX_cmd_buffer.c
and then overwriting it in each of of gfx7_cmd_buffer.c and
gfx8_cmd_buffer.c. Pull it all into genX_cmd_buffer.c so it's no longer
duplicated. Also, stop doing the PATCHLIST conversion in anv_pipeline.c
and just store the number of patch vertices.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
Following our rule that anything that can be dynamic should be set
(and is this case is already) in the following files :
- genX_cmd_buffer.c
- gfx8_cmd_buffer.c
- gfx7_cmd_buffer.c
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
There's no good reason to defer figuring out the size until we emit the
packet. We know everything when the bind happens.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17564>
Instead of trying to compact the surface state table to get rid of any
unused render targets, emit MAX(1, colorAttachmentCount) surface states
always. This ensures that secondaries will always match with primaries
when we go to do the copy since there's no rule requiring the secondary
to have VK_FORMAT_UNDEFINED when the primary has a NULL image view.
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17543>
For some formats like VK_FORMAT_B5G6R5_UNORM_PACK16, we have no direct
matching HW format. We can support it by swizzling.
We already apply those swizzles for image views. We just forgot to
deal with buffer views.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6235
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17385>
This lets us avoid the code duplication between BeginRendering and
BeginCommandBuffer and also lets us stop crawling core render pass
structs directly and instead focus on dynamic rendering concepts.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16953>
In the following case :
vkCmdBindPipeline(compute_pipeline);
vkCmdDispatch(...);
vkCmdBindPipeline(graphics_pipeline);
vkCmdBindIndexBuffer(buffer)
vkCmdDraw(...);
We're emitting the 3DSTATE_INDEX_BUFFER instruction while the HW is
still in GPGPU mode, because we're dealing the pipeline selection to
vkCmdDraw().
Found while debugging Age Of Empire 4, HW is hung on
3DSTATE_INDEX_BUFFER instruction.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17153>
Production Tigerlake and DG1 hardware shouldn't need this workaround.
It was only needed on the very first steppings which never went public.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16575>
If the secondary command buffer executed used push constants on a
different set of stages than the primary is using, we may end up not
reallocating them for the primary, getting misrender artifacts at best,
or a nice GPU hang at worst.
Fixes the tests from a CTS from the future:
dEQP-VK.dynamic_rendering.random.*
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16439>
This is now unnecessary. Either an instruction is never dynamic and
it's emitted in genX_pipeline.c or it can be and it's emitted in
genX_cmd_buffer.c/gfx8_cmd_buffer/gfx7_cmd_buffer.c
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
On Gfx7 we can only give the sample location for a given multisample
number. This means everytime the multisampling value changes, we have
to re-emit the locations. It's fine because it's also where
(3DSTATE_MULTISAMPLE) the number of samples is stored.
On Gfx8+ though, 3DSTATE_MULTISAMPLE only holds the number of samples
and all the sample locations for all number of samples are located in
3DSTATE_SAMPLE_PATTERN. So to be more effecient there, we need to
track the locations for all sample numbers and compare new values with
the relevant sample count when touching the dynamic state.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
We don't know in what state the secondary buffer will leave the HW
when it ends. It's easier to consider everything needs to be reemitted
for now.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
With mutable descriptor types, we can end up in a situation where a
binding can be, for instance, both a UBO and an acceleration
structure.
While we can promote the UBO to a binding table entry and the shader
can use it, this isn't true of acceleration structures that have no
surface state. In that case just skip the entry. The shader is already
compiled to use the descriptor entry.
In the non mutable case, the entry will not be created by
anv_nir_apply_pipeline_layout.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 63e91148b7 ("anv: Enable VK_VALVE_mutable_descriptor_type")
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15969>
Call flush_pipeline_select_3d in CmdBeginRendering() to emit a dummy MEDIA_VFE_STATE
before switching from GPGPU to 3D.
Original commit with the fix:
bc612536 ("anv: Emit a dummy MEDIA_VFE_STATE before switching from GPGPU to 3D")
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Gitlab: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6201
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15954>
When IndirectParameterEnable==true it's not actually used by the hardware,
but if it's not initialized and INTEL_DEBUG=bat is set, then Valgrind complains.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15850>
Now that we're using 3DSTATE_BINDING_TABLE_POOL_ALLOC to set the base
address for the binding table pool separately from surface states, we
don't actually need to update surface state base address anymore.
Instead, we can just set STATE_BASE_ADDRESS once at context creation,
and never bother updating it again, saving some heavyweight flushes
and freeing us from the need for address offsetting trickery.
This patch was originally written by Jason Ekstrand, with fixes from
Lionel Landwerlin, but was targeting Icelake. Doing it there requires
additional changes (15:5 -> 18:8 binding table pointer formats) which
also involve some trade-offs, whereas the XeHP change is purely a win,
so we'll do it here first.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15616>
The problem is that we missed looking at pipeline changes. Pipelines
hold bits of dynamic states and when it changes we might need to
reemit a packet.
v2: fix comment (Tapani)
Add missing anv_cmd_buffer_needs_dynamic_state() use (Tapani)
Cc: mesa-stable
Fixes: 505d176a8e ("anv: disable baked in pipeline bits from dynamic emission path")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15310>
The Vulkan spec was recently clerified to say that transitions only
happen to the bound layers:
"Automatic layout transitions apply to the entire image subresource
attached to the framebuffer. If multiview is not enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the number of layers specified by
VkFramebufferCreateInfo::layers. If multiview is enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the layers corresponding to views which are
used by some subpass in the render pass, even if that subpass does
not reference the given attachment."
This is in the context of render passes but it applies to dynamic
rendering because the implicit layout transition stuff is a Mesa pseudo-
extension and inherits those rules.
For clears, the Vulkan spec says:
"renderArea is the render area that is affected by the render pass
instance. The effects of attachment load, store and multisample
resolve operations are restricted to the pixels whose x and y
coordinates fall within the render area on all attachments. The
render area extends to all layers of framebuffer."
Again, this is in the context of render passes but the same principals
apply to dynamic rendering where the layerCount and renderArea are
specified as part of the vkCmdBeginRendering() call.
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15441>
v2: Use CS_STALL instead of FLUSH_ENABLE in Iris (Lionel)
Add missing CS_STALL after SO_BUFFER change in Anv (Lionel)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: 22.0 <mesa-stable>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14947>
It's tricky to always get the render area to the viewport code. In
particular, it's not provided to secondary command buffers as part of
the inheritance info so we have to bend over backwards and look for a
framebuffer. With VK_KHR_dynamic_rendering, there is no framebuffer and
this approach won't work and we'll need something better if we want
competent guardbands in secondary command buffers.
The good news is that any client that's sloppily rendering and trusting
the clipper to keep things inside the render area will set a scissor and
that's something they have to set inside the secondary. We can dig
through the scissor state and also include the corresponding scissor (if
any) and use that for our render area. This should give us the same
secondary command buffer performance with VK_KHR_dynamic_rendering.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14961>
There's never been a particularly good reason to stick these in gfx7/8.
We mostly did it to deduplicate the binary a bit but this shouldn't emit
all that much code.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14961>
