The CCS could be described in a number of ways, but this format was
chosen to minimize churn in the drivers. We may decide on an different
direction in the future.
v2. Increase alignment for display surfaces. (Nanley)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Use a helper that will automatically handle Gen12's CCS tiling when
creating a CCS isl_surf.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gen12's CCS requires that the main surface have a pitch aligned to 512B.
v2. Provide a BSpec citation. (Ken)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Aligning phys_level0_sa by the compression block dimension prior to
mipmap layout causes the layout of compressed surfaces to differ from
the sampler's expectations in certain cases. The hardware docs agree:
From the BDW PRM, Vol. 5, Compressed Mipmap Layout,
The compressed mipmaps are stored in a similar fashion to
uncompressed mipmaps [...]
The following exceptions apply to the layout of compressed (vs.
uncompressed) mipmaps:
* [...]
* The dimensions of the mip maps are first determined by applying
the sizing algorithm presented in Non-Power-of-Two Mipmaps
above. Then, if necessary, they are padded out to compression
block boundaries.
The last bullet indicates that alignment should not be done for
calculating a miplevel's dimensions, but rather for determining miplevel
placement/padding. Comply with this text by removing the extra
alignment.
Fixes some fbo-generatemipmap-formats piglit failures on all tested
platforms (SNB-KBL).
v2:
- Note fixed platforms.
- Update some consumers via a helper function.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Import some restrictions from intel_tiling_supports_hiz() and
intel_miptree_supports_hiz().
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Import some restrictions from intel_miptree_supports_mcs() and don't
assume that the caller knows which device generations are supported.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes MCS fast clear gpu hangs with Vulkan CTS on ICL in CI.
v2 (Nanley): In the title s/Align/Resize/
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Tested-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
The cacheline size was a requirement for using the BLT engine, which
we don't use anymore except for a few things on old HW, so we drop it.
Fixes CTS's CL#3500 test:
dEQP-VK.api.image_clearing.core.clear_color_image.2d.linear.single_layer.r8g8b8_unorm
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Rewrite the condition to more clearly match the comment. (Jordan)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Patch moves intel_tiled_memcpy[_sse41] libraries to isl, renames some
functions and types and makes the required build system changes for
meson, automake and Android. No functional changes are introduced.
v2: code cleanups, move isl_get_memcpy_type to i965 (Jason)
v3: move isl_mem_copy_fn to priv header, cleanups (Jason, Dylan)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
I was about to make the claim to someone that every field in isl_surf
is either an enum or has explicit units. Then I looked at isl_surf and
discovered this claim was wrong. We should fix that. This commit does
a few refactors:
* Add _B suffixes to some struct fields
* Add _B to some variables and parameters
* Rename row_pitch_tiles -> row_pitch_tl
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This is useful for every user of ISL. Drop the comment along the way to
match similar functions in ISL.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This helper encodes more details, specifically about Haswell, than the
previous asserts in isl_surface_state.c.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
ISL already offers functions to fill out most kinds of SURFACE_STATE,
so why not handle null surfaces too?
Null surfaces are simple, so we can just take the dimensions, rather
than an entirte fill structure.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Also, silence an obnoxious finishme that started occurring for all
GL applications which use stencil after the i965 ISL conversion.
v2: Check against 3DSTATE_STENCIL_BUFFER's pitch bits when using
separate stencil, and 3DSTATE_DEPTH_BUFFER's bits when using
combined depth-stencil.
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We were calculating the total height of 2D surfaces by multiplying the
row pitch by the number of slices. This means that we actually request
slightly more space than actually needed since the padding on the last
slice is unnecessary. For tiled surfaces this is not likely to make a
difference. For linear surfaces, on the other hand, this means we may
require additional memory. In particular, this makes the i965 driver
reject EGL imports of buffers which do not have this extra padding.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
The docs contain a bunch of commentary about the need to pad various
surfaces out to multiples of something or other. However, all of those
requirements are about avoiding GTT errors due to missing pages when the
data port or sampler accesses slightly out-of-bounds. However, because
the kernel already fills all the empty space in our GTT with the scratch
page, we never have to worry about faulting due to OOB reads. There are
two caveats to this:
1) There is some potential for issues with caches here if extra data
ends up in a cache we don't expect due to OOB reads. However,
because we always trash the entire cache whenever we need to move
anything between cache domains, this shouldn't be an issue.
2) There is a potential issue if a surface gets placed at the very top
of the GTT by the kernel. In this case, the hardware could
potentially end up trying to read past the top of the GTT. If it
nicely wraps around at the 48-bit (or 32-bit) boundary, then this
shouldn't be an issue thanks to the scratch page. If it doesn't,
then we need to come up with something to handle it.
Up until some of the GL move to ISL, having the padding code in there
just caused us to harmlessly use a bit more memory in Vulkan. However,
now that we're using ISL sizes to validate external dma-buf images,
these padding requirements are causing us to reject otherwise valid
images due to the size of the BO being too small.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
We already have a helper for doing this in BLORP, this just moves the
logic into ISL where we can share it with other components.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This will be used to load and store clear values from surface state
objects.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It may technically be possible to enable some sort of fast-clear support
for at least the base slice of a 2D array texture on gen7. However,
it's not documented to work, we've never tried to do it in GL, and we
have no idea what the hardware does if you turn on CCS_D with arrayed
rendering. Let's just play it safe and disallow it for now. If someone
really cares that much about gen7 performance, they can come along and
try to get it working later.
If we allow the size to be more than 2^32, then we should compute it
in 64bit arithmetic otherwise we might run into overflow issues.
CID: 1412892, 1412891
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This reverts commit 8aaa13467d, which was
based on an incorrect assumption. Unlike the restriction placed on image
views in the Vulkan API, OpenGL allows you to render to texture views
whose formats differ from the originals.
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=101677
v2 (Jason Ekstrand):
- Remove Vulkan-specific terminology from the commit title.
- Replace '== 7' with '<= 7' to hint that this is a new feature on BDW+.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
V2: Start using gen10 functions isl_gen10*(), gen10_blorp_exec()
gen10_init_atoms() (Jason)
Remove Vulkan changes. Do them later in a separate patch.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Frequently, get_image_offset_sa is combined with get_intratile_offset_sa
so it makes sense to have a single helper to do both. If the caller
doesn't want the intratile offsets, it can simply pass NULL and ISL will
assert that they are 0.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
