We no longer support the old LINE+MAC lowering, and we already lower
this to MAD in NIR on Gfx11+, so the LINTERP virtual opcode always
corresponds the PLN. The only catch is that LINTERP's operands are
reversed from PLN, so we have to switch them.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28705>
We already have a logical opcode and lower to what is basically a send
instruction. We just weren't using SHADER_OPCODE_SEND, instead having
extra redundant infrastructure for no real gain.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28705>
brw_broadcast and generate_mov_indirect both had similar comments, both
with typos ("insead"). One still referred to IVB bugs, while the other
dropped that during the compiler split. The one that dropped the
comment mentioned "both of these" issues, while citing only one issue;
there was in fact a third issue (no-Q/UQ) that wasn't mentioned in
either comment. One also had some bad grammar in the comments.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28458>
We are overriding the type to Q/UQ, so we need to split to two MOVs
if 64-bit integer math is not supported. For reference, Meteorlake
does support 64-bit floats but would still not work correctly here.
See also brw_broadcast(), which does similar indirects but correctly
checks has_64bit_int instead of has_64bit_float.
Cc: mesa-stable
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28458>
This doesn't help very much now. A later commit adds a NIR optimization
pass, tentatively called nir_opt_uniform_subgroup, that converts many
kinds of subgroup operations to things involving
bitCount(ballot(true)). This commit makes a huge difference in the
results of that later commit.
No shader-db changes on any Intel platform.
Fossil-db results:
All Intel platforms had similar results. (Ice Lake shown)
Totals:
Instrs: 165558033 -> 165557519 (-0.00%)
Cycles: 15156188362 -> 15156178922 (-0.00%); split: -0.00%, +0.00%
Totals from 299 (0.05% of 656117) affected shaders:
Instrs: 88293 -> 87779 (-0.58%)
Cycles: 3709498 -> 3700058 (-0.25%); split: -0.28%, +0.03%
v2: Rebase on splitting ELK from BRW. Remove devinfo->ver >= 8 check.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27044>
With the advent of software scoreboarding, we emit sync instructions
in various places to synchronize the execution pipelines. This results
in assembly being littered with a bunch of sync.nop instructions. That
means that when you reorder anything in the program, the scoreboarding
changes, and the number of sync.nops can vary wildly - even if the code
isn't really materially better or worse. This makes it hard to use
tools like shader-db or fossil-db on post-Icelake platforms.
For now, exclude sync.nops from the instruction count statistic. One
day we may want to consider improving the software scoreboarding pass
to emit fewer redundant sync.nop instructions, at which point tracking
this as a separate stat might be useful. For now though, it's simply
cluttering and confusing our results.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27701>
We always set exec size to 16 for this MOV, but the execution group remains
from the previous emitted instruction. This can cause emitting a group
which violates PRM restriction for ChanOff: "The execution size (ExecSize)
must be a factor of the chosen offset."
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25657>
Having the reg set with predication disabled shouldn't cause any problems
during the execution. But when decompiling such instruction the flag won't
be shown in the output, so the recompiling will cause
functionally-identical but binary-different code. Fixing this makes
disasm/asm testing easier.
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25657>
This can be useful for testing i965_disasm and i965_asm by comparing
bin -> asm -> bin results.
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25657>
v2: Add brw_ir_performance.cpp and brw_fs_generator.cpp changes. Fix
overlapping register allocation (via has_source_and_destination_hazard). Fix
incorrect destination register file encoding.
v3: Prevent lower_regioning from trying to "fix" DPAS sources.
v4: Add instruction latency information for scheduling and perf
estimates.
v5: Remove all mention of DPASW. Suggested by Curro and Caio. Update
the comment in fs_inst::has_source_and_destination_hazard. Suggested
by Caio.
v6: Add some comments near the src2 calculation in
fs_inst::size_read. Suggested by Caio.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25994>
And use it in ANV in order to return a "SIMDNxM" name from
vkGetPipelineExecutablePropertiesKHR.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26585>
We use SHADER_OPCODE_SEND directly instead of FS_OPCODE_FB_WRITE (for a
while now) and FS_OPCODE_REP_FB_WRITE (since the previous commit).
Assert that it isn't used on Gfx7+.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
Use a struct for various common parameters rather than per stage
structure or arguments to stage specific entrypoints.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Felix DeGrood <felix.j.degrood@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23942>
In ad9bc1ffb5 ("intel/fs: enable UBO accesses through bindless heap")
we added a new source, we need to fixup the source index for the
generator.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ad9bc1ffb5 ("intel/fs: enable UBO accesses through bindless heap")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23405>
Gives use 4Gb of bindless surface state on Gfx12.5+ instead of 64Mb.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21645>
Most tools looking at shader stats assume that there is only a single
resulting binary shader out of a single input. On Intel HW this is not
always the case. So having a statistic on each variant that reports
the maximum dispatch width helps showing improvement on a single
shader in terms of how large we manage to compile it.
For shaders that can be compiled in multiple SIMD width (like fragment
shaders), this will report the maximum dispatch width in the
statistics of each variants.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22014>
When enabled, on gfx12 plus, we will add the sync nop instruction after
each instruction to make sure that current instruction depends on the
previous instruction explicitly.
This option will help us to get a hint if something is missing or broken
in software scoreboard pass.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21797>
Now that we aren't using them on Gfx8+ we can drop a lot of cruft.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21783>
This mainly lets the software scoreboarding pass correctly mark the
instructions, without needing to resort to fragile manual handling in
the generator.
We can also make small improvements. On Gfx 8LP-12.0, we no longer have
the restrictions about DWord alignment, so we can simply write each half
into its intended location, rather than writing it to the low DWord and
then shifting it in place.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21783>
We can lower FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD into other more
generic sends and drop this internal opcode.
The idea behind this change is to allow bindless surfaces to be used
for UBO pulls and why it's interesting to be able to reuse
setup_surface_descriptors(). But that will come in a later change.
No shader-db changes on TGL & DG2.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20416>
v2: drop the hardcoded inst->mlen=1 (Rohan)
v3: Move back to LOAD/STORE messages (limited to SIMD16 for LSC)
v4: Also use 4 GRFs transpose loads for fills (Curro)
v5: Reduce amount of needed register to build per lane offsets (Curro)
Drop some now useless SIMD32 code
Unify unspill code
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17555>
