Start trimming the fat from intel_batchbuffer.c. First by moving the set
of routines for emitting PIPE_CONTROLS (along with the lore concerning
hardware workarounds) to a separate brw_pipe_control.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This caused us to always free the pipe_surface for the renderbuffer.
The subsequent call to st_update_renderbuffer_surface() would typically
just recreate it. Remove the call to pipe_surface_release() and let
st_update_renderbuffer_surface() take care of freeing the old surface
if it needs to be replaced (because of change to mipmap level, etc).
This can save quite a few calls to pipe_context::create_surface() and
surface_destroy().
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Fixes the following build issue, when building without libudev.
CCLD libGL.la
./.libs/libglx.a(dri2_glx.o): In function `dri2CreateScreen':
src/glx/dri2_glx.c:1186: undefined reference to `loader_open_device'
collect2: ld returned 1 exit status
CCLD libEGL.la
Undefined symbols for architecture x86_64:
"_loader_open_device", referenced from:
_dri2_initialize_x11_dri2 in libegl_dri2.a(platform_x11.o)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91077
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
1000 ms is an extreme value for typical interactive loads. A large
cache has some disadvantages. Search for reusable BOs can take a long
time and memory might get exhausted.
Let's be rather conservative and use half of the old value,
500ms. This is beneficial to some loads on my test system and there
are no regressions.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is the basic granularity for BO allocations. The alignment also
helps with BO reuse by the cached bufmgr.
This results in a huge 45% speedup in Metro 2033 Redux on my test
system. The game relies on buffer orphaning with very small buffers
(hundreds of bytes in size) and that did not work efficiently
before. This change may also affect other applications and games.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Matt, Jason, and I haven't found this useful in a long time.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
But only when doing so is safe according to the
RADEON_INFO_VA_UNMAP_WORKING kernel query.
This avoids kernel GPU VM address range conflicts when the BO has other
references than the GEM handle being closed, e.g. when the BO is shared.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90537
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
It returns a new value for each sample in the TLB. We've already avoided
trying to get the same index's color multiple times at the vc4_program.c
level, so we're not losing anything by doing this.
As of this commit, nothing actually needs the brw_context.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This way we can stop doing is_gles3 checks inside of the compiler.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Previously, these were pulled out of the GL context conditionally based on
whether we were running ff/ARB or a GLSL program. Now, we just pass them
in so that the visitor doesn't have to grab them itself.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Previously, each shader took 3 shader time indices which were potentially
at arbirary points in the shader time buffer. Now, each shader gets a
single index which refers to 3 consecutive locations in the buffer. This
simplifies some of the logic at the cost of having a magic 3 a few places.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This creates the options at screen cration time and then we just copy them
into the context at context creation time. We also move is_scalar to the
brw_compiler structure.
We also end up manually setting some values that the core would have set by
default for us. Fortunately, there are only two non-zero shader compiler
option defaults that we aren't overriding anyway so this isn't a big deal.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
While we're at it, we'll drop the note about 10-20% performance loss.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
v2 (Ken): Make shader_debug_log a printf-like function.
v3 (Jason): Add a void * to pass the brw_context through
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be useful for wrapper functions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Coverity sees the if (mode >= BRW_PRIM_OFFSET (128)) test and assumes
that the else-branch might execute for mode to up 127, which out be out
of bounds.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Coverity sees that the functions immediately below the new assertions
dereference these pointers, but is unaware that an ENDIF always follows
an IF, etc.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If the stride is 0, the source is a uniform and we should not modify the
stride.
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91047
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The call to dri2_x11_add_configs_for_visuals (previously
dri2_add_configs_for_visuals) was moved downwards in commit f8c5b8a1,
but appeared again in its original position after its rename in
d019cd81. Remove it.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
On gen9+ MOCS is an index into a table. It is 7 bits, and AFAICT, bit 0 is for
doing encrypted reads.
I don't recall how I decided to do this for BXT. I don't know this patch was
ever needed, since it seems nothing is broken today on SKL. Furthermore, this
patch may no longer be needed because of the ongoing changes with MOCS setup. It
is what is being used/tested, so it's included in the series.
The chosen values are the old values left shifted. That was also an arbitrary
choice.
v2: Use shift in MOCS to make it clear what we're doing. (Ken)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Without first running the bo through pushbuf_refn, the nouveau drm
library will have uninitialized structures regarding this bo, and will
insert incorrect data.
This fixes supertuxkart 0.9 crash on start (where it ends up doing a lot
of indirect draws).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Since we clear the TFB bufctx binding point above, we need to put all of
the active tfb's back in, even if they haven't changed since last time.
Otherwise the tfb may get moved into sysmem and the underlying mapping
will generate write errors.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
This fixes compilation failures in Dota 2 Reborn where a texture unit
binding point was used that was numerically higher than the max
per stage.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
