Shaders that contain instruction data after an instruction with EOP could end
up parsing that as an instruction, leading to various crashes and asserts in
SB as it gets very confused if it sees for instance a loop start instruction
jumping off to some random point.
Add a couple of asserts, and print EOP bit if set in old asm printer.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a830225adb)
e8e443 missed adding check for undef values also in
unreserve function, leading to an assert triggering.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 36f1999a87)
GetTexImage can read to stencil8 but only from
a stencil or depthstencil textures.
This fixes a bunch of failures in CTS
GL33-CTS.gtf32.GL3Tests.packed_pixels
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c1452983b4)
[Emil Velikov: use glGetTex%sImage + suffix, instead of caller]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This was missed when I did fp64, I've sent a piglit test to cover
the case as well.
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 45971fd0df)
When the edge flag element is enabled then the elements are slightly
reordered so that the edge flag is always the last one. This was
confusing the code to upload the 3DSTATE_VF_INSTANCING state because
that is uploaded with a separate loop which has an instruction for
each element. The indices used in these instructions weren't taking
into account the reordering so the state would be incorrect.
v2: Use nr_elements instead of brw->vb.nr_enabled so that it will cope
when gl_VertexID is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91292
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit 3a1ab23480)
The edge flag data on Gen6+ is passed through the fixed function hardware as
an extra attribute. According to the PRM it must be the last valid
VERTEX_ELEMENT structure. However if the vertex ID is also used then another
extra element is added to source the VID. This made it so the vertex ID is in
the wrong register in the vertex shader and the edge attribute is no longer in
the last element.
v2: Also implement for BDW+
v3 [by Ben]: Remove 10.5 tag. Too late.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84677
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
(cherry picked from commit fb02b4ec48)
Nine code uses some C11 features, and this
leads to compile error on gcc <= 4.5
Another way would have been to use the
-fms-extensions CFLAG
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: "10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 56717c0b06)
We have to re-validate FBOs rendering to the texture like is done
with TexImage and CopyTexImage.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91673
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7eda897bf0)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 11,0 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This is done by returning an rvalue of type void in the
ast_function_expression::hir function instead of a void expression.
This produces (in the case of the ternary) an hir with a call
to the void returning function and an assignment of a void variable
which will be optimized out (the assignment) during the optimization
pass.
This fix results in having a valid subexpression in the many
different cases where the subexpressions are functions whose
return values are void.
Thus preventing to dereference NULL in the following cases:
* binary operator
* unary operators
* ternary operator
* comparison operators (except equal and nequal operator)
Equal and nequal had to be handled as a special case because
instead of segfaulting on a forbidden syntax it was now accepting
expressions with a void return value on either (or both) side of
the expression.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85252
Signed-off-by: Renaud Gaubert <renaud@lse.epita.fr>
Reviewed-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
(cherry picked from commit 7b9ebf879b)
Nominated-by: Mark Janes <mark.a.janes@intel.com>
When gl_VertexID or gl_InstanceID is used a 3DSTATE_VF_SGVS
instruction is sent to create a sort of element to store the generated
values. The last instruction in this chunk of code looks like it was
trying to set the instancing state for the element using the
3DSTATE_VF_INSTANCING instruction. However it was sending
brw->vb.nr_buffers instead of the element index. This instruction is
supposed to take an element index and that is how it is used further
down in the function so the previous code looks wrong. Perhaps
previously the number of buffers coincidentally matched the number of
enabled elements so the value was generally correct anyway. In a
subsequent patch I want to change a bit how it chooses the SGVS
element index so this needs to be fixed.
v2 [by Ben]
Remove stable 10.5 stable tag (it's too late now)
Commit update as follows:
The number of vertex buffers emitted is always <= the number of vertex elements.
To maximize reuse (actually, to minimize relocations - according to the code
comments), a vertex buffer is only emitted once, even when we setup multiple
components (3DSTATE_VERTEX_ELEMENT) from that buffer. This meant that the
previous code would use the wrong indexed element for these reuse cases. This
patch by itself prevents hangs on BSW in the linked bug. It doesn't make the
test pass, the remaining patches are needed for that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91610
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c03247bae0)
In the DRI2 path this event is magically synthesized from the
corresponding DRI2 event, but with Present, the server sends us the
event itself. The DRI2 path fills in the serial number, send_event, and
display fields of the XEvent struct that the app sees, but the Present
path did not.
This is likely related to a class of crashes seen in gtk/clutter apps:
https://bugzilla.redhat.com/attachment.cgi?id=1032631
Note that the crashing instruction is looking up the lock_fns slot in
the Display *, and %rdi (holding the Display *) is 0x1.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8f7ebcb6fa)
This fixes arb_get_texture_sub_image-get, and any situation where the 2d
engine was being used for multi-layer blits to a non-0 level.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2514c78fba)
This enables the second RB on asics that support it which
should boost performance.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 649975e716)
When calling either eglCreateWindowSurface or eglCreatePixmapSurface it
was possible for an application to be aborted as a result of it failing
to create a DRI2 drawable on the server. This could happen due to an
application passing in an invalid native drawable handle, for example.
v2: Handle the case where an error has been set on the connection
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 9a4eae61c2)
We were ignoring them. This is both hilarious and sad.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Edward O'Callaghan <eocallaghan at alterapraxis.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c0b943e87)
The value was copied from r300g, which uses 1/12 subpixels, but this hw
uses 1/16 subpixels.
Should fix piglit: gl-1.4-polygon-offset (formerly a glean test)
(untested, ported from radeonsi)
Reviewed-by: Edward O'Callaghan <eocallaghan at alterapraxis.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d335aad11b)
The value was copied from r300g, which uses 1/12 subpixels, but this hw
uses 1/16 subpixels.
Fixes piglit: gl-1.4-polygon-offset (formerly a glean test)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit bfac8ba9d3)
Because we build here an array format, we don't need to swap the
bytes for big endian.
If it isn't an array format, the bytes will be swapped in
_mesa_format_convert.
v2: remove temp variable
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5f1d5b1c78)
Before, if we encountered an array format of 0 on a BE system, we would
flip all the channels even though it's an invalid format. This would
result in a mostly invalid format with a swizzle of yyyy or wwww. Instead,
we should just return 0 if the array format stashed in the format info is
invalid.
Cc: "10.6 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e3eb91af80)
The swizzle defines where in the format you should look for any given
channel. When we flip the format around for BE targets, we need to change
the destinations of the swizzles, not the sources. For example, say the
format is an RGBX format with a swizzle of xyz1 on LE. Then it should be
wzy1 on BE; however, the code as it was before, would have made it 1zyx on
BE which is clearly wrong.
Reviewed-by: Iago Toral <itoral@igalia.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: "10.6 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 28d1a506c8)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 87cea61b9e)
A TNL state update now requires a DrawBuffer to be set, which it isn't
early on in context creation. Since we init swtnl from context init,
this caused crashes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91570
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 3fa1ca34cc)
This patch fixes a bug in big-endian treatment, where the previous
swizzle info wasn't cleared before a new swizzle info was inserted into
the format field using a bitwise-OR operation.
v2: use MESA_ARRAY_FORMAT_SWIZZLE_*_MASK instead of numeric constants
v3: align according to coding style
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 2ac171a7db)
The meta CopyImageSubData path uses BlitFramebuffers to do the actual copy.
The only thing that can affect BlitFramebuffers other than the currently
bound framebuffers is the scissor so we need to save that off and reset it.
If we don't do this, applications that use a scissor together with
CopyImageSubData will get accidentally scissored copies.
Tested-by: Markus Wick <markus at selfnet.de>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 736c6f3cfc)
Otherwise it would crash on Gen8 with scalar VS. The issue can easily
be reproduced with the following patch, but I don't see any reason why
it wouldn't be possible to end up with an ATTR argument here even
without it.
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 42a18ca760)
Page 161 of the OpenGL-ES 3.1 (PDF) spec, and page 207 of the OpenGL 4.5 (PDF),
both on section '8.6. ALTERNATE TEXTURE IMAGE SPECIFICATION COMMANDS', states:
"An INVALID_ENUM error is generated if an invalid value is specified for
internalformat".
It is currently returning INVALID_OPERATION error because
_mesa_get_read_renderbuffer_for_format() is called before the internalformat
argument has been validated. To fix this, we move this call down the validation
process, after _mesa_base_tex_format() has been called. _mesa_base_tex_format()
effectively serves as a validator for the internal format.
Fixes 1 dEQP test:
* dEQP-GLES3.functional.negative_api.texture.copyteximage2d_invalid_format
Fixes 1 piglit test:
* spec@oes_compressed_etc1_rgb8_texture@basic
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4b07e9a033)
Currently, glTexSubImageXD attempt to resolve the texture object
(by calling _mesa_get_current_tex_object()) before validating the given
target. However, that method explicitly states that target must have been
validated before calling it, so it never returns a user error.
The target validation occurs later when texsubimage_error_check() is called.
This patch reorganizes target validation, taking it out from the error check
function and into a point before the texture object is resolved.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5d64cae842)
[Emil Velikov: s/_mesa_enum_to_string/_mesa_lookup_enum_by_nr/]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/mesa/main/teximage.c
Page 68, section 7.2 'Shader Binaries" of the of the OpenGL ES 3.1,
and page 88 of the OpenGL 4.5 specs state:
"An INVALID_VALUE error is generated if count or length is negative.
An INVALID_ENUM error is generated if binaryformat is not a supported
format returned in SHADER_BINARY_FORMATS."
Currently, an INVALID_OPERATION error is returned for all cases.
Fixes 1 dEQP test:
* dEQP-GLES3.functional.negative_api.shader.shader_binary
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b38a50f1e3)
Calling eglQuerySurface on a window or pixmap with the EGL_LARGEST_PBUFFER
attribute resulted in the contents of the 'value' parameter being modified.
This is the wrong behaviour according to the EGL spec, which states:
"Querying EGL_LARGEST_PBUFFER for a pbuffer surface returns the
same attribute value specified when the surface was created with
eglCreatePbufferSurface. For a window or pixmap surface, the
contents of value are not modified."
Avoid this from happening by checking that the surface type is EGL_PBUFFER_BIT
before modifying the contents of the parameter.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b2c5986ea1)
Update the DRI image interface error codes to reflect the needs of the
EGL_EXT_image_dma_buf_import extension. This means updating the existing error
code documentation and adding a new __DRI_IMAGE_ERROR_BAD_ACCESS error code
so that drivers can correctly reject unsupported pitches and offsets. Hook
the new error code up in EGL to return EGL_BAD_ACCESS.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit cfc3200a35)
This fixes the single-sample fast clear hang.
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit d4ad4c2061)
For 10.6: This fixes graphical corruption occuring on most Southern Islands
Radeon GPUs. This will allow closing a lot of bugs in the bugzilla.
The patch has a better explanation. Just a summary here:
- The CPU always uploads a whole descriptor array to previously-unused memory.
- CP DMA isn't used.
- No caches need to be flushed.
- All descriptors are always up-to-date in memory even after a hang, because
CP DMA doesn't serve as a middle man to update them.
This should bring:
- better hang recovery (descriptors are always up-to-date)
- better GPU performance (no KCACHE and TC flushes)
- worse CPU performance for partial updates (only whole arrays are uploaded)
- less used IB space (no CP_DMA and WRITE_DATA packets)
- simpler code
- corruption issues are fixed on SI cards
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit b0528118df)
For 10.6: This is a prerequisite for the next fix. The below comment is from
the original commit.
This is mainly needed for tessellation where a VS can be bound as VS, ES,
or LS, and TES (tess. evaluationshader) can be bound as VS or ES or neither.
Therefore we need the ability to move pointers to descriptors between
shaders arbitrarily.
The idea is that the context has a mapping from PIPE_SHADER_x to
SPI_SHADER_USER_DATA_x. After a shader is enabled or disabled,
si_shader_change_notify should be called to update this mapping accordingly.
There is a dirty flag for each shader pointer, but only one emit function
for all pointers in the whole context, whose code and logic is separated
from descriptors.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 3ce91c727f)
