We had some code that considered the possibility that the destination
might be linear when configuring TFU jobs, but we never actually allow
for this to happen since we avoid hitting these paths in that case, as
the TFU always produces UIF results. Instead, add an assert when
producing the TFU packet to ensure we are expecting a UIF result.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
In addition to use the helper, we also remove some of the lowering we
had at preprocess_nir, as they are called now by the helper.
As we are here we also move the call to nir_lower_sysvals_to_varyings,
that for some reason we were calling it before preprocess_nir.
It is worth to note that with this change we lose the ability to debug
the NIR just after spirv_to_nir using V3D_DEBUG, as now this is done
on vk_spirv_to_nir, and as mentioned that includes several lowerings
now. The workaround to that is to use NIR_DEBUG.
We also needed to change how to check the entrypoint on the broadcom
compiler, checking just if it is an entrypoint, instead of assuming
that the name will be "main".
v2: tweak comment, squash v3dv and compiler change (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15449>
Allow to choose the line rasterization algorithm. It supports
rectangular and Bresenham-style line rasterization.
v2 (Iago):
- Update documentation.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15407>
Move number of bits for subpixel precision in rasterizer to a define.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15407>
Add the supported line rasterization modes as enums in the XML packet
definition.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15407>
Add support for`V3D_DEBUG=cache`, which prints on-disk cache events.
v2:
- Use same debug format for v3d and v3dv (Alejandro)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15380>
This has been implemented for a while but we could not expose it on
Vulkan 1.0 because the extension declares a dependency on
VK_KHR_sampler_ycbcr_conversion, which we don't implement, and
CTS would complain.
On Vulkan 1.1 however, VK_KHR_sampler_ycbcr_conversion was promoted
to core as an optional feature, and this is enough for the the
dependency to be satisfied, even if the feature is not supported,
meaning that we can now expose the extension.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15426>
Some of the tests marked as flake didn't show up as flakes for a long
time (more than 3 months). So likely they are already fixed.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15411>
Add test that it is a timeout in the CI, but otherwise it passes.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15374>
We have twice the registers in this case so it makes sense to double
this as well. While this causes slight regressions in shader-db
stats (due to additional register pressure), it helps us hide latency
of memory reads better on 2-thread compiles, where the thread switch
mechanism will be less effective. This shows a ~3% performance
improvement on the UE4 SunTemple demo.
total instructions in shared programs: 12642413 -> 12656164 (0.11%)
instructions in affected programs: 2272652 -> 2286403 (0.61%)
helped: 2924
HURT: 3389
total uniforms in shared programs: 3703861 -> 3704776 (0.02%)
uniforms in affected programs: 213729 -> 214644 (0.43%)
helped: 823
HURT: 1272
total max-temps in shared programs: 2150686 -> 2153505 (0.13%)
max-temps in affected programs: 191332 -> 194151 (1.47%)
helped: 1900
HURT: 1891
total spills in shared programs: 3255 -> 3274 (0.58%)
spills in affected programs: 166 -> 185 (11.45%)
helped: 3
HURT: 6
total fills in shared programs: 4630 -> 4656 (0.56%)
fills in affected programs: 367 -> 393 (7.08%)
helped: 7
HURT: 15
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
This can add quite a bit of register pressure so it makes sense to disable it
to prevent us from dropping to 2 threads or increase spills:
total instructions in shared programs: 12672813 -> 12642413 (-0.24%)
instructions in affected programs: 256721 -> 226321 (-11.84%)
helped: 719
HURT: 77
total threads in shared programs: 415534 -> 416322 (0.19%)
threads in affected programs: 788 -> 1576 (100.00%)
helped: 394
HURT: 0
total uniforms in shared programs: 3711370 -> 3703861 (-0.20%)
uniforms in affected programs: 28859 -> 21350 (-26.02%)
helped: 204
HURT: 455
total max-temps in shared programs: 2159439 -> 2150686 (-0.41%)
max-temps in affected programs: 32945 -> 24192 (-26.57%)
helped: 585
HURT: 47
total spills in shared programs: 5966 -> 3255 (-45.44%)
spills in affected programs: 2933 -> 222 (-92.43%)
helped: 192
HURT: 4
total fills in shared programs: 9328 -> 4630 (-50.36%)
fills in affected programs: 5184 -> 486 (-90.62%)
helped: 196
HURT: 0
Compared to the stats before adding scheduling of non-filtered
memory reads we see we that we have now gotten back all that was
lost and then some:
total instructions in shared programs: 12663186 -> 12642413 (-0.16%)
instructions in affected programs: 2051803 -> 2031030 (-1.01%)
helped: 4885
HURT: 3338
total threads in shared programs: 415870 -> 416322 (0.11%)
threads in affected programs: 896 -> 1348 (50.45%)
helped: 300
HURT: 74
total uniforms in shared programs: 3711629 -> 3703861 (-0.21%)
uniforms in affected programs: 158766 -> 150998 (-4.89%)
helped: 1973
HURT: 499
total max-temps in shared programs: 2138857 -> 2150686 (0.55%)
max-temps in affected programs: 177920 -> 189749 (6.65%)
helped: 2666
HURT: 2035
total spills in shared programs: 3860 -> 3255 (-15.67%)
spills in affected programs: 2653 -> 2048 (-22.80%)
helped: 77
HURT: 21
total fills in shared programs: 5573 -> 4630 (-16.92%)
fills in affected programs: 3839 -> 2896 (-24.56%)
helped: 81
HURT: 15
total sfu-stalls in shared programs: 39583 -> 38154 (-3.61%)
sfu-stalls in affected programs: 8993 -> 7564 (-15.89%)
helped: 1808
HURT: 1038
total nops in shared programs: 324894 -> 323685 (-0.37%)
nops in affected programs: 30362 -> 29153 (-3.98%)
helped: 2513
HURT: 2077
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
We do a few changes over NIR's defaults:
1. Lower delay for texture reads. Empirically, we don't observe any
benefits with delays over 50 and since this delay value is still
used by the scheduler in the "favor register pressure" case it is
benefitial to avoid overestimating it too much.
2. Adjust delay for non-filtered TMU reads to the delay selected for
texture reads.
3. In our case, UBO reads from dynamically uniform addresses don't
use the TMU and have a latency of 1 instruction in the best case
scenario or 4 at worse, so we go with 1 so we don't try to move
this early.
This helps us get back some of what we lost when updating the
default scheduler configuration to add a delay for non-filtered
memory reads:
total instructions in shared programs: 13126587 -> 12671765 (-3.46%)
instructions in affected programs: 3764097 -> 3309275 (-12.08%)
helped: 14664
HURT: 4244
total threads in shared programs: 407208 -> 415522 (2.04%)
threads in affected programs: 8716 -> 17030 (95.39%)
helped: 4224
HURT: 67
total uniforms in shared programs: 3812698 -> 3711224 (-2.66%)
uniforms in affected programs: 335170 -> 233696 (-30.28%)
helped: 2816
HURT: 3551
total max-temps in shared programs: 2318430 -> 2159345 (-6.86%)
max-temps in affected programs: 539991 -> 380906 (-29.46%)
helped: 13173
HURT: 1440
total spills in shared programs: 49086 -> 5966 (-87.85%)
spills in affected programs: 48306 -> 5186 (-89.26%)
helped: 1655
HURT: 28
total fills in shared programs: 55810 -> 9328 (-83.29%)
fills in affected programs: 54821 -> 8339 (-84.79%)
helped: 1659
HURT: 22
LOST: 0
GAINED: 3
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
This has been pending for a long time. It is not very consistent to
add a significant delay for textures and not do it for UBOs, etc
The reason we have not been doing this so far is the accumulated effect
on register pressure for V3D as shown by shader-db results below, but
from the point of view of a generic scheduler it makes sense to do this.
Later patches will address V3D specific issues with register pressure
derived from this by letting the driver control its instruction delay
settings.
total instructions in shared programs: 12662138 -> 13126587 (3.67%)
instructions in affected programs: 1813091 -> 2277540 (25.62%)
helped: 2410
HURT: 10499
total threads in shared programs: 415858 -> 407208 (-2.08%)
threads in affected programs: 17348 -> 8698 (-49.86%)
helped: 8
HURT: 4333
total uniforms in shared programs: 3711483 -> 3812698 (2.73%)
uniforms in affected programs: 128012 -> 229227 (79.07%)
helped: 3474
HURT: 2143
total max-temps in shared programs: 2138763 -> 2318430 (8.40%)
max-temps in affected programs: 318780 -> 498447 (56.36%)
helped: 588
HURT: 11997
total spills in shared programs: 3860 -> 49086 (1171.66%)
spills in affected programs: 709 -> 45935 (6378.84%)
helped: 23
HURT: 1595
total fills in shared programs: 5573 -> 55810 (901.44%)
fills in affected programs: 1067 -> 51304 (4708.25%)
helped: 23
HURT: 1595
LOST: 3
GAINED: 0
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
This doesn't have any significant impact shader-db stats and would
reduce our capacity to hide latency from the loads, so it is probably
undesirable:
total instructions in shared programs: 12663189 -> 12663186 (<.01%)
instructions in affected programs: 4222 -> 4219 (-0.07%)
helped: 9
HURT: 4
total uniforms in shared programs: 3711624 -> 3711629 (<.01%)
uniforms in affected programs: 186 -> 191 (2.69%)
helped: 0
HURT: 2
total max-temps in shared programs: 2138822 -> 2138857 (<.01%)
max-temps in affected programs: 569 -> 604 (6.15%)
helped: 1
HURT: 9
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
This is to match other NIR terminology.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
Now that we don't sort our nodes we can arrange them so we can
easily translate between nodes and temps without a mapping table,
just applying an offset.
To do this we have a single array of nodes where twe put first the nodes
for accumulators and then the nodes for temps. With this setup we can
ensure that for any given temp T, its node is always T + ACC_COUNT.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
Nodes are allocated in order to registers so initially sorting
was used to ensure that nodes with smaller life ranges would
be assigned first and therefore be more likely to get
accumulators.
However, since d81a6e5f1d now we don't rely on order to make
decisions about accumulators and instead we make policy decisions
based on actual liveness, so sorting is no longer strictly
relevant to this decision.
Furthermore, we are not re-sorting nodes after each spill either,
since that would probably require that we rebuild the interference
graph after each spill (the graph identifies nodes by their index).
Shader-db results show a significant improvement in instruction
counts, due to more optimal accumulator assignments. The reason for
this is that we use a round-robin policy for choosing the next
accumulator to assign. The idea behind this is preventing nearby
temps to be assigned to the same accumulator so that QPU scheduling
is more flexible, but if we sort our nodes, we are basically not
assigning temps in program order any more and the round-robin policy
becomes less effective:
total instructions in shared programs: 13000420 -> 12663189 (-2.59%)
instructions in affected programs: 11791267 -> 11454036 (-2.86%)
helped: 62890
HURT: 19987
total threads in shared programs: 415874 -> 415870 (<.01%)
threads in affected programs: 20 -> 16 (-20.00%)
helped: 2
HURT: 4
total uniforms in shared programs: 3711652 -> 3711624 (<.01%)
uniforms in affected programs: 43430 -> 43402 (-0.06%)
helped: 134
HURT: 173
total max-temps in shared programs: 2144876 -> 2138822 (-0.28%)
max-temps in affected programs: 123334 -> 117280 (-4.91%)
helped: 4112
HURT: 1195
total spills in shared programs: 3870 -> 3860 (-0.26%)
spills in affected programs: 1013 -> 1003 (-0.99%)
helped: 14
HURT: 12
total fills in shared programs: 5560 -> 5573 (0.23%)
fills in affected programs: 1765 -> 1778 (0.74%)
helped: 14
HURT: 17
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
For us they are basically uniforms too so we want to make their
lifespans short to facilitate allocating them to accumulators.
total instructions in shared programs: 13043585 -> 13015385 (-0.22%)
instructions in affected programs: 8326040 -> 8297840 (-0.34%)
helped: 24939
HURT: 19894
total threads in shared programs: 415860 -> 415858 (<.01%)
threads in affected programs: 4 -> 2 (-50.00%)
helped: 0
HURT: 1
total uniforms in shared programs: 3721953 -> 3720451 (-0.04%)
uniforms in affected programs: 96134 -> 94632 (-1.56%)
helped: 744
HURT: 435
total max-temps in shared programs: 2173431 -> 2154260 (-0.88%)
max-temps in affected programs: 264598 -> 245427 (-7.25%)
helped: 10858
HURT: 841
total spills in shared programs: 4005 -> 4010 (0.12%)
spills in affected programs: 700 -> 705 (0.71%)
helped: 5
HURT: 10
total fills in shared programs: 5801 -> 5817 (0.28%)
fills in affected programs: 1346 -> 1362 (1.19%)
helped: 6
HURT: 11
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
If we are compiling with a strategy that does not allow TMU spills
we should not allow spilling anything that is not a uniform.
Otherwise the RA cost/benefit algorithm may choose to spill a
temp that is not uniform and that will cause us to immediately
fail the strategy and fallback to the next one, even if we
could've instead chosen to spill more uniforms to compile the
program successfully with that strategy.
Some relevant shader-db stats:
total instructions in shared programs: 13040711 -> 13043585 (0.02%)
instructions in affected programs: 234238 -> 237112 (1.23%)
helped: 73
HURT: 172
total threads in shared programs: 415664 -> 415860 (0.05%)
threads in affected programs: 196 -> 392 (100.00%)
helped: 98
HURT: 0
total uniforms in shared programs: 3717266 -> 3721953 (0.13%)
uniforms in affected programs: 12831 -> 17518 (36.53%)
helped: 6
HURT: 100
total max-temps in shared programs: 2174177 -> 2173431 (-0.03%)
max-temps in affected programs: 4597 -> 3851 (-16.23%)
helped: 79
HURT: 21
total spills in shared programs: 4010 -> 4005 (-0.12%)
spills in affected programs: 55 -> 50 (-9.09%)
helped: 5
HURT: 0
total fills in shared programs: 5820 -> 5801 (-0.33%)
fills in affected programs: 186 -> 167 (-10.22%)
helped: 5
HURT: 0
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
Our cost was 5 which matches the number of instructions we have to
add for a TMU spill (a fill is 4 instructions).
Uniform spills on the other hand add an extra instruction for each
fill and remove one instruction for the spill itself. These have
a cost of 1.
Therefore, if we have a single spill+fill, we end up with +9
instructions if it is a TMU spill and +0 instructions with a uniform
spill, so making the former only 5 times more costly is probably
not a good idea, and this is without even considering the added
latency of the TMU accesses.
Relevant shader-db changes show this causes as a marginal instruction
count increase in a few shaders but better thread counts and lower
TMU spilling overall:
total instructions in shared programs: 13037315 -> 13040711 (0.03%)
instructions in affected programs: 370106 -> 373502 (0.92%)
helped: 187
HURT: 321
total threads in shared programs: 415090 -> 415664 (0.14%)
threads in affected programs: 574 -> 1148 (100.00%)
helped: 287
HURT: 0
total uniforms in shared programs: 3706674 -> 3717266 (0.29%)
uniforms in affected programs: 63075 -> 73667 (16.79%)
helped: 40
HURT: 395
total max-temps in shared programs: 2176080 -> 2174177 (-0.09%)
max-temps in affected programs: 15838 -> 13935 (-12.02%)
helped: 316
HURT: 34
total spills in shared programs: 4247 -> 4010 (-5.58%)
spills in affected programs: 2599 -> 2362 (-9.12%)
helped: 107
HURT: 14
total fills in shared programs: 6121 -> 5820 (-4.92%)
fills in affected programs: 3622 -> 3321 (-8.31%)
helped: 108
HURT: 13
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
This commit adds support for Vulkan backend on a630_skqp job.
= Needed changes
- Needed to install libvulkan-dev package on system
- Refactored the way the available skqp reports are printed
tested in development builds with skia tools
Piglit expectations had to be updated in various drivers due to !14750 not
having bumped the tags when it tried to uprev.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14686>
On V3D the quality of the code we generate is significantly affected by
how we decide to assign accumulators during register allocation, which
is determined by liveness, favoring short-lived temps.
There are many shaders that end up doing a whole lot of uniform loads
first, and using them later, which is very inconvenient for our register
allocation process because this increases uniform liveness and causes
us to use accumulators less efficientely, leading to significant churn.
To fix this, we move uniforms right before their first use in the same
block, but we need to do this after NIR scheduling, which means we are
doing it in non-SSA form, since the scheduler has a tendency to undo
this optimization and it is not easy to modify it to avoid it, since it
works in more abstract terms, using instruction dependencies, estimated
register pressure and instruction delay information to do its work,
which are very different concepts.
total instructions in shared programs: 13316738 -> 13033613 (-2.13%)
instructions in affected programs: 10389172 -> 10106047 (-2.73%)
helped: 55442
HURT: 16144
total threads in shared programs: 413722 -> 415048 (0.32%)
threads in affected programs: 1428 -> 2754 (92.86%)
helped: 680
HURT: 17
total loops in shared programs: 1716 -> 1690 (-1.52%)
loops in affected programs: 26 -> 0
helped: 26
HURT: 0
total uniforms in shared programs: 3704313 -> 3705181 (0.02%)
uniforms in affected programs: 687730 -> 688598 (0.13%)
helped: 2920
HURT: 7384
total max-temps in shared programs: 2364785 -> 2175190 (-8.02%)
max-temps in affected programs: 1215387 -> 1025792 (-15.60%)
helped: 49667
HURT: 1556
total spills in shared programs: 4241 -> 4248 (0.17%)
spills in affected programs: 642 -> 649 (1.09%)
helped: 11
HURT: 19
total fills in shared programs: 6115 -> 6125 (0.16%)
fills in affected programs: 1276 -> 1286 (0.78%)
helped: 11
HURT: 21
total sfu-stalls in shared programs: 34381 -> 36578 (6.39%)
sfu-stalls in affected programs: 16055 -> 18252 (13.68%)
helped: 3647
HURT: 5206
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15056>
If we have a postponed spill, the temp we create at ip is no longer
the spilled temp and therefore is affected by the thrsw injection.
Fixes corruption in the additive blending animation demo from
Three.js.
Fixes: f3c3228522 ('broadcom/compiler: do not rebuild the interference graph after each spill')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15112>
Not all Vulkan implementations allows rendering to linear images, so in
order to support scanning out from these on Windows we might have to copy
through a buffer like we do in the PRIME path.
To avoid reimplementing the same, let's instead generalize the code a
bit so it doesn't have to specfy any PRIME-specific details.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12210>
When we spill we add new temps. We should be careful not to access
liveness for these until we have re-computed it after all spills and
fill for that the spilled temp have been processed so as to avoid
out-of-bounds accesses to the c->temp_start and c->temp_end arrays.
This fixes a crash in a Three.js demo when we try to patch register
classes after a TMU spill that was caused because we would incorrectly
try to patch the same temps we had just added for the spill itself,
which is not only unnecessary but also incorrect since we these temps
would not have liveness information available yet and thus would
cause out of bounds accesses.
Fixes: f3c3228522 ('broadcom/compiler: do not rebuild the interference graph after each spill')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15107>
Make piglit test jobs to run always, as piglit testsuite offers more
coverage for the VC4 driver.
On the other hand, make the EGL testing manually, as we don't have
enough devices to execute all the tests fast enough.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15045>
We added spill_count to handle uniform batch spills, which we no longer do.
What we want now is a way to know if we are spilling registers.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15041>
Instead, we only recompute liveness and we add new nodes and
interferences to the graph manually (we also need to patch
register classes in some cases).
To assist in this process, we also add an ip counter to our
instructions that we also recompute after each spill, which we use
to identify registers that cross thrsw boundries introduced with
TMU spills and fills and adjust their register classes accordingly
(removing their capacity to use accumulators).
This significantly reduces the CPU cost of spills. Using
shaders/closed/gputest/piano/7.shader_test as reference:
Compile time up to the first successful compile strategy in main is
~24s and with this change it is ~11s. With this speed up, we can now
try all 2-thread compile strategies (including the fallback scheduler)
in only ~15s.
A full shader-db run results in:
Total CPU time (seconds): 9904.67 -> 9087.98 (-8.25%)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15041>
We may be pipelining TMU writes and reads, in which case we can
see both TMUWT and LDTMU at the end of a TMU sequence, so we should
not assume that a TMUWT always terminates a sequence.
Also, we had a bug where we were using inst instead of scan_inst
to check if we find another TMUWT after the curent instruction.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15041>
Instead of whether they are allowed to spill or not. This is more flexible.
Also, while we are not currently enabling spilling on any 4-thread strategies,
should we do that in the future, always prefer a 4-thread compile.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15041>
Until now we would only allow spilling as a last resort in the
last 2 strategies, however, it is possible that in some cases
earlier strategies may produce less spills if we allowed spilling
on them.
Likewise, the fallback scheduler can sometimes produce less spills
than 2 threads with optimizations disabled.
With this change, we start allowing all our 2-thread strategies to
spill, and instead of choosing the first strategy that is successful,
we choose the one that doesn't spill or the one with the least amount
of spilling.
It should be noted that this may incur in a significant increase
of compile times. We will address this in a follow-up patch.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15041>
When I originally added vk_image_view, I was overly clever when it came
to the format field. I decided to make it only contain the bits of the
format contained in the selected aspects. However, this is confusing
(not generally a good thing) and it's also not always what you want.
The Vulkan 1.3.204 spec says:
"When using an image view of a depth/stencil image to populate a
descriptor set (e.g. for sampling in the shader, or for use as an
input attachment), the aspectMask must only include one bit, which
selects whether the image view is used for depth reads (i.e. using a
floating-point sampler or input attachment in the shader) or stencil
reads (i.e. using an unsigned integer sampler or input attachment in
the shader). When an image view of a depth/stencil image is used as
a depth/stencil framebuffer attachment, the aspectMask is ignored
and both depth and stencil image subresources are used."
So, while the restricted format makes sense for texturing, it doesn't
for when the image is being used as an attachment. What we probably
actually want is both versions of the format. We'll call the one given
by the VkImageViewCreateInfo vk_image_view::format and the restricted
one vk_image_view::view_format.
This is just the first commit which switches format to view_format so
the compiler will make sure we get them all. The next commit will
re-add vk_image_view::format but this time unmodified.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15007>
The only interesting information stored in v3dv_cmd_pool is the list of
command buffers and that's already tracked by vk_command_pool.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14917>
Looks like 3 implementations already have that field in their private
command_buffer struct, and having it at the vk_command_buffer opens the
door for generic (but suboptimal) secondary command buffer support.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14917>
Add more failing tests to the expected failures.
These are obtained after executing the full Vulkan CTS.
v2:
- Add comments in the tests (Alejandro)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14948>
Use drmSyncobjSignal to signal out_syncobjs when a GPU job submission
ends in the simulator. With this, we can enable multisync support in the
simulator and keep the multisync approach to process fence by submitting
a serialized no-op job that adds the fence to the array of out syncobjs,
i.e. syncobjs to be signaled in the kernel when a job completes (job
post deps).
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14768>
The main thing is VK 1.3 testing, but also includes test bugfixes. The
1.3 CTS required an uprev of deqp-runner to handle a new style of test
output, and that deqp-runner brings in some neat new features, too (piglit
in your deqp-runner suite, and extension list checking).
A bunch of VK tests got renamed, so I replaced panvk's custom test list
with simple include filters on the main test list.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (panvk)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14920>
