We now have some preliminary fp16 support available. We're not able to
expose this for GLSL quite yet, but for internal blend shaders, we're
able to do control bitness ourselves just fine. So let's fp16 that
stuff!
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Eventually this should be replaced by proper tex RA / not emitting so
many silly moves to begin with / better general copy prop. For now
remove it since it breaks things.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Share a single mask field in midgard_instruction with a unified format,
rather than using separate masks for each instruction tag with
hardware-specific formats. Eliminates quite a bit of duplicated code and
will enable vec8/vec16 masks as well (which don't map as cleanly to the
hardware as we might like).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We can handle differing, but we'd prefer not to because there are
restrictions on sizing which aren't accounted for yet.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It's not clear where the extra indirection was from (older hardware or
just older blobs?)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The scale and type-convert can now be expressed in NIR, rather than MIR,
which is significantly more maintainable and demonstrates correctness of
the type conversion patches.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than using a dest_override, we upscale integers by using a half
field with a sign-extend bit. A variant of this trick should also work
for floats, but one step at a time!
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We have dedicated intrinsics to access the raw contents of the tile
buffer so we can use a dedicated NIR pass to lower appropriately for
blend shaders, rather than introducing a bizarre hardcoded blend
epilogue that only works for RGBA8_UNORM.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Oh, dear. No turning back now.
We begin implementing non-32-bit types, using downsizing integer type
conversions as the initial instructions. We implement them naively as
type-converting moves; substantially more efficient operation is
possible by copypropping the type conversion modifier, but this
optimization is not implemented here.
Size converting modifiers on Midgard allow an instruction to write to a
destination 1/2 the size, or to read from a source 1/2 the size. If we
need an extreme conversion (32-bit to 8-bit, for instance), multiple
type converting ops are chained together, which here is handled via an
algebraic pass.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This begins the process of removing blend shader specific MIR into a
more general NIR lowering pass for formats.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Eventually, this will allow packing clear colours for all formats,
including floating-point framebuffers, pure integer buffers, and special
formats. Currently, a few of these formats are supported, and many more
are handled through a generic Gallium colour packing path (which is not
a perfect fit for the hardware, but works for many formats and is a sane
default for the moment.)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We see the hardware doesn't actually support float framebuffers in the
native sense -- rather, it just allows higher bpp framebuffers and lets
a blend shader / additional clear_color fields sort out the formats.
This will be.. interesting.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Full MRT support is a while away, but in the mean time, we can remove
code that explicitly assumes nr_cbufs <= 0, to minimize the obstacles
we'll face later when we add the whole thing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
According to the spec [1], `__egl_Main` is the only symbol that needs to
be exported. We don't want applications directly linking against
libEGL_mesa.so (apps should always go through libEGL.so, regardless of
who is providing it), so we shouldn't export any other symbols either.
[1] https://github.com/NVIDIA/libglvnd/blob/master/include/glvnd/libeglabi.h
(this header is the closest there is to a spec)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part of the effort to replace shell scripts with portable python scripts.
I could've used a trivial `assert lines == sorted(lines)`, but this way
the caller is shown which entrypoint is out of order.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
According to the Vulkan ICD spec [1], these two symbols must be exposed:
- vk_icdGetInstanceProcAddr
- vk_icdNegotiateLoaderICDInterfaceVersion
and this one is optional:
- vk_icdGetPhysicalDeviceProcAddr
[1] https://github.com/KhronosGroup/Vulkan-Loader/blob/master/loader/LoaderAndLayerInterface.md
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
No longer used as of last commit :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Note: the list in gbm-symbols.txt is the same as the one that was in
gbm-symbols-check, I just took the opportunity to sort it.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
I've re-written this in bash a couple times over the years, and then
I realised python is much more portable and already required by Mesa, so
we might as well make use of it.
I decided to still use the build system's NM instead of re-implementing
symbols extraction, to offload the complexity of keeping it compatible
with many systems (Linux, Unix, BSD, MacOS, etc.), especially when
cross-building.
This new script checks not only that nothing is exported when it
shouldn't be, but also that everything that should be exported is.
Sometimes, some symbols _can_ be exported but don't have to be, in which
case they can be prefixed with `(optional)`.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Drivers only use lower_io for modes where pointers don't have a
meaningful value, and dereferences can always be traced back to a
variable. But there can be other modes, like global mode with
VK_EXT_buffer_device_address, where pointers cannot be traced back to a
variable, and lower_io would segfault on loads/stores of these since
nir_deref_instr_get_variable() would return NULL.
Just use the mode on the deref itself to filter out these modes before
we try to get the variable.
Fixes: 118a66df99 ("radv: Use NIR barycentric coordinates")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Currently this is done rather late in radv, after lowering booleans, so
it isn't safe to run additional optimizations that may add e.g. 1-bit
booleans. We could move the lowering parts earlier, but since right now
we only lower FS inputs and by this point all indirects have been
lowered away, there's no reason we should need to optimize anything.
One shader from Devil May Cry 5 was getting optimized, but only because
the optimization loop was working on 32-bit booleans which revealed an
opportunity that was hidden with 1-bit booleans, and we generated a
1-bit boolean which is invalid.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111092
Fixes: 118a66df99
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fix the following building error:
external/mesa/src/amd/addrlib/src/gfx10/gfx10addrlib.cpp:35:10:
fatal error: 'gfx10_gb_reg.h' file not found
^~~~~~~~~~~~~~~~
1 error generated.
Fixes: 78cdf9a ("amd/addrlib: add gfx10 support")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
The necessary Android makefile building rules are added
and the generation rules are simplified for readability
Fixes the following building errors:
external/mesa/src/amd/common/ac_llvm_build.c:1496:45:
error: use of undeclared identifier 'V_008F0C_IMG_FORMAT_8_UINT'
case V_008F0C_BUF_DATA_FORMAT_8: format = V_008F0C_IMG_FORMAT_8_UINT; break;
^
Fixes: 74a26af ("amd/common/gfx10: add register JSON")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
The gen_enum_to_str.py generates vk_enum_to_str.c and its header at once.
However, the makefiles incorrectly list both files parallel with the same
recipes. That means both two files may be generated simultaneously by two
processes. The generating files may be truncated by another process, as
shown below:
$ cd $OUT/obj/STATIC_LIBRARIES/libmesa_vulkan_util_intermediates/util
$ ls -l
-rw-rw-r-- 1 lh lh 193713 Jul 5 13:31 vk_enum_to_str.c
-rw-rw-r-- 1 lh lh 4609 Jul 5 13:31 vk_enum_to_str.d
-rw-rw-r-- 1 lh lh 0 Jul 5 16:21 vk_enum_to_str.h
Let one file depends on the other with empty recipe to avoid the issue.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It's unnecessary to manually add these include paths since they could
be imported automatically.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Add libmesa_nir to a common LOCAL_STATIC_LIBRARIES defined by
ANV_STATIC_LIBRARIES so that its include path can be imported
automatically. Then ANV_INCLUDES is unnecessary and could be
eliminated.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
The dummy library libmesa_anv_entrypoints is totally unnecessary.
The four VULKAN_GENERATED_FILES could be generated and built in
libmesa_vulkan_common directly. The libraries using the generated
headers should get it via the exported include path.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Export the correct include path so that the libraries use it can
get it automatically.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
