Meta currently uses screenspace RECTLIST primitives that lie within
the framebuffer rectangle. Since this behavior shouldn't change in the
future, disable the scissor operation whenever rectlists are used.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
There are no users of this field.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
For the following reasons, there is no behavioural change with this
commit: the ViewportXYClipTest function of the CLIP stage will continue
to be enabled outside of Meta (where disable_viewport is always false),
and the CLIP stage is turned off within Meta, so this function will
continue to be disabled in that case.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
According to 3D Primitives Overview in the Bspec, when the RECTLIST
primitive is in use, the CLIP stage should be disabled or set to have
a different Clip Mode, and Viewport Mapping must be disabled:
Clipping: Must not require clipping or rely on the CLIP unit’s
ClipTest logic to determine if clipping is required. Either the CLIP
unit should be DISABLED, or the CLIP unit’s Clip Mode should be set
to a value other than CLIPMODE_NORMAL.
Viewport Mapping must be DISABLED (as is typical with the use of
screen-space coordinates).
We swap out ::disable_viewport for ::use_rectlist, because we currently
always use the RECTLIST primitive when we disable viewport mapping, and
we'll likely continue to use this primitive.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
Avoid excessive state emission. Relevant state for an action command
will get set by the user:
From Chapter 5. Command Buffers,
When a command buffer begins recording, all state in that command
buffer is undefined.
[...]
Whenever the state of a command buffer is undefined, the application
must set all relevant state on the command buffer before any state
dependent commands such as draws and dispatches are recorded, otherwise
the behavior of executing that command buffer is undefined.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
CmdSet* functions dirty the CommandBuffer's dynamic state. This causes
the new state to be emitted when CmdDraw is called. Since we don't need
the state that would be emitted, don't call the CmdSet* functions.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
Since the scissor rectangle always matches that of the framebuffer,
this operation isn't needed.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
Fixes intermittent Vulkan CTS failures within the test groups:
dEQP-VK.api.object_management.multithreaded_per_thread_device
dEQP-VK.api.object_management.multithreaded_per_thread_resources
dEQP-VK.api.object_management.multithreaded_shared_resources
Signed-off-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94904
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The only place we were using this was in meta_blit2d which always creates a
new image anyway so we can just use the image offset.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Now it just creates the image and view. The caller is responsible for
handling the offset calculations.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
The old function tried to work in elements which isn't, strictly speaking,
a valid thing to do. In the case of a non-power-of-two format, there is no
guarantee that the x offset into the tile is a multiple of the format
block size. This commit refactors it to work entirely in terms of a tiling
(not a surface) and bytes/rows.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
With the new blit framework we aren't using array textures and, from
talking with Nanley, we don't think it's going to be useful in the future
either. Just get rid of it for now.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
In other words, vport scissors are derived from viewport states.
If the scissor test is enabled, the intersection of both is used.
The guard band will disable clipping, so we have to clip per-pixel.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This might result in an INVALID_OPCODE dmesg error in case a join is
attached to an atomic operation.
Spotted with arb_shader_image_load_store-host-mem-barrier on GK104.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
This is in preparation of raising the number of exposed sampler views to 32
bits, which will raise the total number of sampler views to 33 for the
polygon stipple texture. That texture should never be compressed (and it's
certainly not a depth texture), but this approach seems cleaner to me than
special-casing the last slot in all affected code paths.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The previous value of 18 was motivated by having drivers that want to expose
16 samplers but also use some additional samplers for internal use. Raising
the value even higher isn't going to hurt that case.
On the other hand, some drivers actually use PIPE_MAX_SAMPLERS as the number
of samplers they expose externally, so raising this number above 32 is fragile
(because several places in the code use bitfields, and tracking down and
widening all of them is prone to miss some case).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
It is used as a bitfield, so it seems cleaner to keep it unsigned.
The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.
v2: add an assert for bitfield size and use 1u << idx
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.
Reviewed-by: Brian Paul <brianp@vmware.com>
Line anti-aliasing will fail when there is no free sampler available. Make
the corresponding guard more robust in preparation of raising
PIPE_MAX_SAMPLERS to 32.
The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.
v2: add an assert for bitfield size and use 1u << idx
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
When hasFixedUnit is false, polygon stippling will fail when there is no free
sampler available. Make the corresponding guard more robust in preparation
of raising PIPE_MAX_SAMPLERS to 32.
The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.
v2: add an assert for bitfield size and use 1u << idx
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
