Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d2f2a550cf)
This was the only state tracker emitting it, and hardware was just having
to lower it anyway (or failing to lower it at all).
v2: Extracted from a larger patch by Jose (which also dropped DP2A), fixed
to actually not reference TGSI_OPCODE_CND. Change by anholt.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
(cherry picked from commit 925cb75f89)
Otherwise pthread_mutex_lock will be an undefined reference
on OpenBSD.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88219
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c5be9c126d)
Gen4 hardware appears to GPU hang frequently when using Chromium, and
also when running 'glmark2 -b ideas'. Most of the error states contain
3DPRIMITIVE commands in quick succession, with very few state packets
between them - usually VERTEX_BUFFERS/ELEMENTS and CONSTANT_BUFFER.
I trimmed an apitrace of the glmark2 hang down to two draw calls with a
glUniformMatrix4fv call between the two. Either draw by itself works
fine, but together, they hang the GPU. Removing the glUniform call
makes the hangs disappear. In the hardware state, this translates to
removing the CONSTANT_BUFFER packet between the two 3DPRIMITIVE packets.
Flushing before emitting CONSTANT_BUFFER packets also appears to make
the hangs disappear. I observed a slowdown in glxgears by doing it all
the time, so I've chosen to only do it when BRW_NEW_BATCH and
BRW_NEW_PSP are unset (i.e. we haven't done a CS_URB_STATE change or
already flushed the whole pipeline).
I'd much rather understand the problem, but at this point, I don't see
how we'd ever be able to track it down further. We have no real tools,
and the hardware people moved on years ago. I've analyzed 20+ error
states and read every scrap of documentation I could find.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80568
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85367
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c4fd0c9052)
This patch fixes the return of a wrong value when x is lower than
-MAX_INT(src_bits) as the result would not be between [-1.0 1.0].
v2 by Samuel Iglesias <siglesias@igalia.com>:
- Modify snorm_to_float() to avoid doing the division when
x == -MAX_INT(src_bits)
Cc: 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 7d1b08ac44)
When doing repclears, we only want to use the SIMD16 program, not the
SIMD8 one. Kristian added this to the Gen7+ code, but apparently we
missed it in the Gen6 code. This patch copies that code over.
Approximately doubles the performance in a clear microbenchmark from
mesa-demos (clearspd -width 500 -height 500 +color) on Sandybridge.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
References: https://code.google.com/p/chrome-os-partner/issues/detail?id=34681
(cherry picked from commit f95733ddb7)
Conflicts:
src/mesa/drivers/dri/i965/gen6_wm_state.c
r600, rv610 and rv630 all have a bug in their GPR indexing
and how the hw inserts access to PV.
If the base index for the src is the same as the dst gpr
in a previous group, then it will use PV instead of using
the indexed gpr correctly.
The workaround is to insert a NOP when you detect this.
v2: add second part of fix detecting DST rel writes followed
by same src base index reads.
v3: forget adding stuff to structs, just iterate over the
previous node group again, makes it more obvious.
v3.1: drop local_nop.
Fixes ~200 piglit regressions on rv635 since SB was introduced.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 3c8ef3a74b)
Since d8da6decea where the
state tracker started using UCMP on cayman a number of tests
regressed.
this seems to be r600g is doing CNDGE_INT for UCMP which is >= 0,
we should be doing CNDE_INT with reverse arguments.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 0d4272cd8e)
This fixes all failing piglit VertexID tests.
Cc: 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit d7c6f397f4)
From GL 4.4 Core profile:
If both PRIMITIVE_RESTART and PRIMITIVE_RESTART_FIXED_INDEX are
enabled, the index value determined by PRIMITIVE_RESTART_FIXED_INDEX is
used. If PRIMITIVE_RESTART_FIXED_INDEX is enabled, primitive restart is not
performed for array elements transferred by any drawing command not taking a
type parameter, including all of the *Draw* commands other than *DrawEle-
ments*.
Cc: 10.2 10.3 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 8f5d309521)
The "normal" detection (querying clflush size) already made sure it is
non-zero, however another method did not. This lead to crashes if this
value happened to be zero (apparently can happen in virtualized environments
at least).
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=87913
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5fea39ace3)
The code used PIPE_ALIGN_VAR for the variable used by fxsave, however this
does not work if the stack isn't aligned. Hence use PIPE_ALIGN_STACK function
decoration to fix the segfault which can happen if stack alignment is only
4 bytes.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=87658.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b59c7ed0ab)
assert's get compiled out in release builds, so they can't be relied
upon to perform logic.
Reported-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Roy Spliet <rspliet@eclipso.eu>
Cc: "10.2 10.3 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fb1afd1ea5)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
gather_oa_results(), like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I get nervous when I see code patterns like this:
(void*) + (int) * (int)
I smell 32-bit overflow all over this code.
This patch retypes 'snapshot_size' to 'ptrdiff_t', which should fix any
potential overflow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 414be86c96)
This patch reduces the likelihood of pointer arithmetic overflow bugs in
intel_texsubimage_tiled_memcpy() , like the one fixed by b69c7c5dac.
I haven't yet encountered any overflow bugs in the wild along this
patch's codepath. But I recently solved, in commit b69c7c5dac, an overflow
bug in a line of code that looks very similar to pointer arithmetic in
this function.
This patch conceptually applies the same fix as in b69c7c5dac. Instead
of retyping the variables, though, this patch adds some casts. (I tried
to retype the variables as ptrdiff_t, but it quickly got very messy. The
casts are cleaner).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
(cherry picked from commit 225a09790d)
This fixes the new piglit test: arb_uniform_buffer_object/2-buffers-bug
Cc: 10.2 10.3 10.4 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 48094d0e65)
This is a partial revert of c89306983c.
It split the {start,base}_vertex_location handling into several steps:
1. Set brw->draw.start_vertex_location = prim[i].start
and brw->draw.base_vertex_location = prim[i].basevertex.
(This happened once per _mesa_prim, in the main drawing loop.)
2. Add brw->vb.start_vertex_bias and brw->ib.start_vertex_offset
appropriately. (This happened in brw_prepare_shader_draw_parameters,
which was called just after brw_prepare_vertices, as part of state
upload, and only happened when BRW_NEW_VERTICES was flagged.)
3. Use those values when emitting 3DPRIMITIVE (once per _mesa_prim).
If we drew multiple _mesa_prims, but didn't flag BRW_NEW_VERTICES on
the second (or later) primitives, we would do step #1, but not #2.
The first _mesa_prim would get correct values, but subsequent ones
would only get the first half of the summation.
The reason I originally did this was because I needed the value of
gl_BaseVertexARB to exist in a buffer object prior to uploading
3DSTATE_VERTEX_BUFFERS. I believed I wanted to upload the value
of 3DPRIMITIVE's "Base Vertex Location" field, which was computed
as: (prims[i].indexed ? prims[i].start : prims[i].basevertex) +
brw->vb.start_vertex_bias. The latter value wasn't available until
after brw_prepare_vertices, and the former weren't available in the
state upload code at all. Hence the awkward split.
However, I believe that including brw->vb.start_vertex_bias was a
mistake. It's an extra bias we apply when uploading vertex data into
VBOs, to move [min_index, max_index] to [0, max_index - min_index].
>From the GL_ARB_shader_draw_parameters specification:
"<gl_BaseVertexARB> holds the integer value passed to the <baseVertex>
parameter to the command that resulted in the current shader
invocation. In the case where the command has no <baseVertex>
parameter, the value of <gl_BaseVertexARB> is zero."
I conclude that gl_BaseVertexARB should only include the baseVertex
parameter from glDraw*Elements*, not any internal biases we add for
optimization purposes.
With that in mind, gl_BaseVertexARB only needs prim[i].start or
prim[i].basevertex. We can simply store that, and go back to computing
start_vertex_location and base_vertex_location in brw_emit_prim(), like
we used to. This is much simpler, and should actually fix two bugs.
Fixes missing geometry in Unvanquished.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85529
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit c633528cba)
Fixes the piglits which check that gl_VertexID includes the base vertex
offset:
arb_draw_indirect-vertexid elements
gl-3.2-basevertex-vertexid
Note that this leaves out the original G80, for which this will continue
to fail. It could be fixed by passing a driver constbuf value in, but
that's beyond the scope of this change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit be0311c962)
LAST_LINE_PIXEL has actually been renamed to PIXEL_CENTER_INTEGER in
rnndb; use that method to implement the rasterizer setting, used for
st/nine.
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 609c3e51f5)
E.g. this could happen on older kernels which don't support the
RADEON_INFO_SI_BACKEND_ENABLED_MASK query yet. The code in
si_write_harvested_raster_configs() doesn't deal with this correctly and
would probably mangle the value badly.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit b3057f8097)
This was probably missed when moving from a fixed binding table layout
to a dynamic one that changes based on the shader.
Fixes newly proposed Piglit test fbo-mrt-new-bind.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87619
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Mike Stroyan <mike@LunarG.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4616b2ef85)
The blitter will start at a pixel's natural alignment. For PBOs, if the
provided offset if not aligned, bits will get dropped.
This change adds offset alignment check for src and dst, kicking back if
the requirements are not met.
The change is based on following verbiage from BSPEC:
Color pixel sizes supported are 8, 16, and 32 bits per pixel (bpp).
All pixels are naturally aligned.
Found in the following locations:
page 35 of intel-gfx-prm-osrc-hsw-blitter.pdf
page 29 of ivb_ihd_os_vol1_part4.pdf
page 29 of snb_ihd_os_vol1_part5.pdf
This behavior was observed with Steam Big Picture rendering incorrect
icon colors. The fix has been tested on Ubuntu and SteamOS on Haswell.
Signed-off-by: Cody Northrop <cody@lunarg.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83908
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 83e8bb5b1a)
Nominated-by: Matt Turner <mattst88@gmail.com>
Previously only geometry shader outputs would be assigned locations if
the geometry shader was the only stage in the linked program.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: pavol@klacansky.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82585
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit a909b995d9)
Nominted-by: Ian Romanick <ian.d.romanick@intel.com>
producer_var could be NULL if consumer_var is not NULL and
consumer_is_fs is false. This will occur when the producer is NULL and
the consumer is the geometry shader for a program that contains only a
geometry shader. This will occur starting with the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: pavol@klacansky.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82585
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 5eca78a00a)
Nominated-by: Ian Romanick <ian.d.romanick@intel.com>
It seems to have been forgotten during viewports array implementation time.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 19e05d6898)
We were assuming, when constructing a new brw_reg struct, that the
negate and abs register modifiers would not be present by default in
the new register.
Now, we force explicitly setting these values when constructing a new
register.
This will avoid problems like forgetting to properly set them when we
are using a previous register to generate this new register, as it was
happening in the dFdx and dFdy generation functions.
Fixes piglit test shaders/glsl-deriv-varyings
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82991
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 8517e665bc)
glXSwapBuffersMscOML() with target_msc=divisor=remainder=0 gets
translated into target_msc=divisor=0 but remainder=1 by the mesa
api. This is done for server DRI2 where there needs to be a way
to tell the server-side DRI2ScheduleSwap implementation if a call
to glXSwapBuffers() or glXSwapBuffersMscOML(dpy,window,0,0,0) was
done. remainder = 1 was (ab)used as a flag to tell the server to
select proper semantic. The DRI3/Present backend ignored this
signalling, treated any target_msc=0 as glXSwapBuffers() request,
and called xcb_present_pixmap with invalid divisor=0, remainder=1
combo. The present extension responded kindly to this with a
BadValue error and dropped the request, but mesa's DRI3/Present
backend doesn't check for error codes. From there on stuff went
downhill quickly for the calling OpenGL client...
This patch fixes the problem.
v2: Change comments to be more clear, with reference to
relevant spec, as suggested by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 0d7f4c8658)
Restores proper immediate tearing swap behaviour for
OpenGL bufferswap under DRI3/Present.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
v2: Add Frank Binns signed off by for his original earlier
patch from April 2014, which is identical to this one, and
Chris Wilsons reviewed tag from May 2014 for that patch, ergo
also for this one.
v3: Incorporate comment about triple buffering as suggested
by Axel Davy, and reference to relevant spec provided by
Eric Anholt.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 455d3036fa)
Prevent calls to glXGetSyncValuesOML() and glXWaitForMscOML()
from overwriting the (ust,msc) values of the last successfull
swapbuffers call (PresentPixmapCompleteNotify event), as
glXWaitForSbcOML() relies on those values corresponding to
the most recent completed swap, not to whatever was last
returned from the server.
Problematic call sequence without this patch would have been, e.g.,
glXSwapBuffers()
... wait ...
swap completes -> PresentPixmapComplete event -> (ust,msc)
updated to reflect swap completion time and count.
... wait for at least 1 video refresh cycle/vblank increment.
glXGetSyncValuesOML()
-> PresentNotifyMsc event overwrites (ust,msc) of swap
completion with (ust,msc) of most recent vblank
glXWaitForSbcOML()
-> Returns sbc of last completed swap but (ust,msc) of last
completed vblank, not of last completed swap.
-> Client is confused.
Do this by tracking a separate set of (ust, msc) for the
dri3_wait_for_msc() call than for the dri3_wait_for_sbc()
call.
This makes the glXWaitForSbcOML() call robust again and restores
consistent behaviour with the DRI2 implementation.
Fixes applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Rename vblank_msc/ust to notify_msc/ust as suggested by
Axel Davy for better clarity.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit ad8b0e8bf6)
targetSBC == 0 is a special case, which asks the function
to block until all pending OpenGL bufferswap requests have
completed.
Currently the function just falls through for targetSBC == 0,
returning bogus results.
This breaks applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Simplify as suggested by Axel Davy. Add comments proposed
by Eric Anholt.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8cab54de16)
llvmpipe disables denorms on purpose (on x86/sse only), because denorms are
generally neither required nor desired for graphic apis (and in case of d3d10,
they are forbidden).
However, this caused some arithmetic tests using denorms to fail on some
systems, because the reference did not generate the same results anymore.
(It did not fail on all systems - behavior of these math functions is sort
of undefined when called with non-standard floating point mode, hence the
result differing depending on implementation and in particular the sse
capabilities.)
So, for the reference, simply flush all (input/output) denorms manually
to zero in this case.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=67672.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 8148a06b8f)
Nominated-by: Matt Turner <mattst88@gmail.com>
Back to the original commit (8313f444) adding the workaround, we were
enabling it on gens <= 7, even though gens <= 5 can't do multisampling.
I cannot find documentation that says that Sandybridge needs this
workaround but in practice disabling it causes these piglit tests to
fail:
EXT_framebuffer_multisample/interpolation {2,4} centroid-deriv{,-disabled}
On Ironlake:
total instructions in shared programs: 4358478 -> 4349671 (-0.20%)
instructions in affected programs: 117680 -> 108873 (-7.48%)
A bunch of shaders in TF2, Portal 2, and L4D2 are cut by 25~30%.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
(cherry picked from commit 1a2de7dce8)
On evergreen there are 4 regs, on r600/700 there is only one.
Don't initialise regs and trash someone elses state.
Not sure this fixes anything, but hey one less stupid.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 7f21cf7198)
