This doesn't test for direction only, it tests for the minimum distance we
expect in the scroll event. Rename accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Re-uses the touch_down interface for now, but requires the slot is always 0.
That's easier for now than adding a new interface for abs event, at least
until we have more than one device that needs it.
This device, along with a couple of similar ones have a tendency to break in
the X.Org stack without people noticing. They're special in that they have
absolute x/y axes but relative wheels. For libinput that's not as much of a
problem as it is in X but let's add them anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Matching patch for REL_WHEEL is 09a3770961, not sure why I didn't
do both at the same time.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the ratelimit helpers for SYN_DROPPED logging. This guarantees that we
will still receive SYN_DROPPED log-messages after multiple days of
runtime, even though there might have been a SYN_DROPPED flood at one
point in time.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds "struct ratelimit" and "ratelimit_test()". It's a very simple
rate-limit helper modeled after Linux' lib/ratelimit.c by Dave Young.
This comes in handy to limit log-messages in possible busy loops etc..
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Mark touches as idle, rather then dead, on release. This causes no functional
changes since we only evert check for tap-touch-state == touch, and neither
being idle or dead == touch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
According to the diagram, we should only check the tap-touch-state before
sending a button press / release when in state touch_2 or touch_3.
tp_tap_notify always checks the tap-touch-state. This is problematic when in
state tapped, or one of the follow up states, since this could cause the
button 1 release to never happen.
In practice this is never a problem since the touch passed into tp_tap_notify
is NULL when called for timeout or button events, and in the 2 affected paths
where we're dealing with a touch or release tap-touch-state always is
TAP_TOUCH_STATE_TOUCH.
However we should not rely on this and properly follow the diagram, this
commit therefor drops the touch argument to tp_tap_notify, and adds explicit
tap-touch-state checks in the places where they are present in the diagram too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The touchpad tap code explicitly supports 2 finger tap-n-drag, this commit
adds a test-case for this, which fails due to the 2 finger scrolling code
sending scroll events during a 2 finger tap-n-drag.
And this commit fixes the test-case, by not sending scroll events while a
tap-n-drag is active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The tap code will move individual touches to a state of TAP_TOUCH_STATE_DEAD
after a timeout. In case of tap-n-drag this should not have any influence,
make the litest_touch_move_to take long enough to trigger the timeout to
verify that this does not has any influence.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In reality moving a touch from point to another takes time. In some cases
(when a timeout may trigger during the move, e.g. tap-n-drag on a touchpad),
this is important. Add a sleep_ms parameter, which will cause
litest_touch_move_to to sleep the specified amount of ms every step.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the device description, define the interfaces for touch down/move even
though we technically don't have those interfaces. Makes it easier to test.
The fake-mt tests make sure the device shows up correctly and that no touch
events are being sent for touch events.
This device is a pointer device too, the pointer tests will test it for
correct functionality of the REL_X/Y bits, no special test needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The kernel requires absolute axes to fit into the semantic ABS_ naming
scheme but doesn't provide enough free bits unlabelled axes. Devices with many
axes run into the ABS_MT range and look like MT devices when they're not.
See http://www.freedesktop.org/software/libevdev/doc/1.3/group__mt.html
Affected is e.g. the MS Surface 2 touch cover that has codes [41, 62]
set for min/max [-127, 127].
No special handling needed other than forcing has_mt/has_touch to be 0.
ABS_MT_* events from non-touch devices are discarded by libinput.
The has_mt/has_touch = 0 isn't needed, but looks nicer than an empty if
body.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=85836
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In the future, we should allow multiple sendevent modes set simultanously.
Change the API to use a bitmask instead of a single return value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Before this commit the tap code deals with enabled being set to false,
by waiting for tap.state to become IDLE, and then ignoring any events from
that point on.
This causes a problem when enabled gets set to true again while fingers are
down, because when in IDLE no release events are expected, so once a release
event for one of the fingers is send, log_bug_libinput gets called.
This commit fixes this by making enabled use the same mechanism for enabled
state transitions as the tap suspend / resume code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some laptops with both a clickpad and a trackpoint have such a large touchpad,
that parts of the users hands will touch the pad when using the trackpoint.
Examples of this are the Lenovo T440s and the Toshiba Tecra Z40-A.
This commit makes libinput automatically disable the touchpad while using
the trackpoint on these devices, except for the buttons, as people may want
to use the touchpad (hardware or soft) buttons while using the trackpoint.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is what the return value in tp_tap_handle_state is called, and it better
reflects what the flag does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
While e.g. disabling the touchpad while the trackpoint is used, we want to
stop sending tap (or scroll or motion) events. We cannot use tp_clear_state at
this time as that will also release any touchpad buttons pressed, breaking
dragging with the trackpoint using the touchpad or clickpad buttons.
Calling tp_release_all_taps() and then ensuring that we do not call
tp_tap_handle_state as long as the trackpoint is in use, is enough to disable
taps when the trackpoint is in use.
However when the trackpoint stops being used, we cannot simply start calling
tp_tap_handle_state() again, we first need to sync the tap.state to the current
reality, specifically if fingers are down it must be TAP_STATE_DEAD, so that
their releases do not trigger the log_bug_libinput on a release in
tp_tap_idle_handle_event.
Directly messing with tap.state from outside evdev-mt-touchpad-tap.c is not
good, so add tp_tap_suspend and tp_tap_resume functions for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Before this commit tp_release_all_taps would call tp_tap_handle_timeout, which
is a nop when in state DRAGGING. tp_clear_state then releases all touches and
calls touchpad_handle_state which moves the state to DRAGGING_WAIT, and the
button 1 release will only be done after the tap-timeout, rather then directly
as it should on tp_clear_state.
This commit fixes this by instead of calling tp_tap_handle_timeout, directly
releasing pressed buttons and switching to state DEAD or IDLE depending on
fingers_down.
Besides fixing this issue, this rewrite also makes it possible to use
tp_release_all_taps outside of tp_clear_state, which will be used to add
tap suspend / resume functionality in a follow up commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For features like e.g. disable-touchpad-while-typing, it is necessary for one
device to be able to listen into another device's events.
It is tempting to use the existing device_added / device_removed mechanism
to give e.g. the keyboard a link to the touchpad, and make the keyboard code
disable / re-enable the touchpad but this is wrong. This needs to be a setting
of the touchpad, and the policy for things like which events to count as
activity, and what sort of timeout to use to consider the device idle, belongs
in the touchpad code not in the keyboard code.
Add an event listeners mechanism so that the touchpad can listen for (e.g.)
keyboard events, and respond to these itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding internal event listeners, so that the
callbacks for these can get the full 64 bit timestamps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The libinput evdev code uses 64 bit timestamps internally, to avoid having to
deal with timestamp wraps. The internal foo_notify_bar functions time argument
however is only 32 bits, bump this to 64 bits to avoid truncating the timestamps
when calling these functions.
This is a preparation patch for adding internal event listeners, so that the
callbacks for these can get the full 64 bit timestamps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Assume "normal" mice are 400DPI, and that all calculations should be
normalized to this before being fed into the filter.
There isn't yet a way to configure a device's DPI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Converting to integer before the sqrt calculation can cause loss of
motion at low speed.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Log a message when the kernel event queue overflows and events are dropped.
After 10 messages logging stops to avoid flooding the logs if the condition
is persistent.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tapping and clickfinger is unaffected, physical and software buttons are
swapped. The main area of a clickpad remains as left button though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Two separate flags needed, want_left_handed and left_handed to avoid switching
to left_handed while a button is still down. Since each backend has a
different way of determining whether buttons are down, let them set a function
to do exactly that. Then call that function whenever a button release event is
posted to switch the device to right/left-handed if applicable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For some tests we need to string multiple event sequences together into one
event frame. Use a push/pop frame approach that stops litest from sending any
EV_SYN/SYN_REPORT events, so we can merge two touches together by e.g.
litest_push_event_frame(d);
litest_touch_down(d, 0, 10, 10);
litest_touch_down(d, 1, 20, 50);
litest_pop_event_frame(d);
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than a random msleep() with a comment, use a helper function that
describes what we're waiting for. Also makes changing the timeouts easier in
the future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2-finger scrolling only, we don't have anything else yet
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
