I'm not sure if anything even uses this, but I found this on radv, so
just fix it on anv for consistency.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some applications continue to use the Xlib client library and expect that
VK_KHR_xlib_surface will be available in the driver. Service these
applications by converting the Display pointer to xcb_connection_t and use
the existing xcb code in the driver.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
SampleMask is only 8bits long on gen7.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97278
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes the vulkan cts regression in test dEQP-VK.api.info.device.properties
Cc: Mark Janes <mark.a.janes@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
V1: Add multisample positions (Nanley)
V2: Fix 8x sample positions to match OpenGL (Anuj)
V3: Vulkan has standard sample locations. They need not be same as
in OpenGL. (Anuj)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will help sharing multisample state setting code.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We've been setting it in gen7 forever but never in gen8; best to make it
consistent. This hasn't caused any problems yet because we don't advertise
support for statistics queries yet.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The multisample rasterization mode is computed based on this field,
3DSTATE_RASTER::DXMultisampleRasterizationMode (only for forced
multisampling), 3DSTATE_RASTER::APIMode, and the number of samples. There
are two tables in the SKL PRM that describe how the final multisample mode
is calculated: "Windower (WM) Stage >> Multisampling >> Multisample
ModeState >> Table 1" and the formula for "SF_INT::Multisample
Rasterization Mode".
The "DX Multisample Rasterization Enable" bit changes whether multisample
mode is set to OFF_PIXEL or ON_PATTERN in the samples > 1 case. In the
samples == 1 case, the bit has no effect. Since Vulkan has no concept of
disabling multisampling for samples > 1, we can just set the bit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
According to the IVB PRM Vol2 P1, this bit must be set if a pixel shader
contains a discard instruction.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97207
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
See commit b0629e6894, where we discovered
that the SOL stage's "Rendering Disable" feature is a lot faster at
throwing away all geometry than the clipper's "reject all" mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We should use the persample_dispatch variable in prog_data.
Fixes all (~60) the DEQP sample shading tests. Many tests exited with
VK_ERROR_OUT_OF_DEVICE_MEMORY without this patch.
V2: Use the shader key bits set in brw_compile_fs (Jason)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This should get texture gather working on gen8+ and mostly working on gen7.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-dev@lists.freedesktop.org>
The bulk of this is the same. There are just a couple fields that only
exist on one generation or another, and we can easily handle those with
an #ifdef.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We set the cull mode, but forgot the enable bit. Gen8 uses this.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Gen7/7.5 clip code used APIMODE_OGL, while the Gen8+ clip code used
APIMODE_D3D. The meaning hasn't changed, so one of these must be wrong.
It appears that the hardware documentation is completely wrong. It
claims that the "API Mode" bit means:
0h APIMODE_OGL NEAR_VP boundary == 0.0 (NDC)
1h APIMODE_D3D NEAR_VP boundary == -1.0 (NDC)
However, DirectX typically uses 0.0 for the near plane, while unextended
OpenGL uses -1.0. i965's gen6_clip_state.c uses APIMODE_D3D for the
GL_ZERO_TO_ONE case, so I believe the meanings are backwards from what
the documentation says.
Section 23.2 ("Primitive Clipping") of the Vulkan 1.0.21 specification
contains the following equations:
-w_c <= x_c <= w_c
-w_c <= y_c <= w_c
0 <= z_c <= w_c
This means that Vulkan follows D3D semantics.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Gen6-7.5 use CLIPMODE_REJECT_ALL, while Gen8+ just used REJECT_ALL.
Being consistent will let me unify code, and I prefer having the prefix.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Likewise, rename the enum type to glsl_interp_mode.
Beyond the GLSL front-end, talking about "interpolation modes" seems
more natural than "interpolation qualifiers" - in the IR, we're removed
from how exactly the source language specifies how to interpolate an
input. Also, SPIR-V calls these "decorations" rather than "qualifiers".
Generated by:
$ find . -regextype egrep -regex '.*\.(c|cpp|h)' -type f -exec sed -i \
-e 's/INTERP_QUALIFIER_/INTERP_MODE_/g' \
-e 's/glsl_interp_qualifier/glsl_interp_mode/g' {} \;
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Dave Airlie <airlied@redhat.com>
The old calculation, which used view->offset, encorporated buffer->offset
into the size calculation where it doesn't belong. This meant that, if
buffer->offset > buffer->size, you would always get a negative size. This
fixes 170 dEQP-VK.renderpass.attachment.* Vulkan CTS tests on Haswell.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
We can totally do it, we were just only setting up one BLEND_STATE and, now
that the code is unified with gen8, we should be handling it correctly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This renames BLEND_STATE to BLEND_STATE_ENTRY and adds an new struct
BLEND_STATE which is just an array of 8 BLEND_STATE_ENTRYs. This will make
it much easier to write gen-agnostic blend handling code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
In the next patch, ISL will unconditionally perform verification of a
surface's tiling and usage. Since it will require that w-tiled images
be stencil buffers, create a stencil surface to copy from a
w-tiled/stencil surface.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If an internal user creates an image with Vulkan tiling VK_IMAGE_TILING_OPTIMAL
and an ISL tiling that isn't set, ISL will fail to create the image as
anv_image_create_info::isl_tiling_flags will be an invalid value.
Correct this by making anv_image_create_info::isl_tiling_flags an opt-in,
filtering bitmask, that allows the caller to specify which ISL tilings are
acceptable, but not contradictory to the Vulkan tiling.
Opt-out of filtering for vkCreateImage.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Set limits that are consistent with ISL's assertions in
isl_genX(buffer_fill_state_s)() and Anvil's format-DescriptorType
mapping in anv_isl_format_for_descriptor_type().
Fixes the following new crucible tests:
* stress.limits.buffer-update.range.uniform
* stress.limits.buffer-update.range.storage
These tests are in this patch: https://patchwork.freedesktop.org/patch/98726/
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A ternary is clearer because the range member is assigned one of two values
dependant on one condition.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This became unused due to commit 612e35b2c6 .
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Section 13.2.3. of the Vulkan spec requires that implementations be able to
bind sparsely-defined Descriptor Sets without any errors or exceptions.
When binding a descriptor set that contains a dynamic buffer binding/descriptor,
the driver attempts to dereference the descriptor's buffer_view field if it is
non-NULL. It currently segfaults on undefined descriptors as this field is never
zero-initialized. Zero undefined descriptors to avoid segfaulting. This
solution was suggested by Jason Ekstrand.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96850
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
