Instead of looping over all stages and re-accessing prog_data at the
end, we can just move the URB size check into iris_update_compiled_xs,
in the new != old block, where we know the shader changed - plus where
we're disabling tessellation. We already have the prog_data handy in
these cases, with a bit less pointer chasing.
Improves performance in Piglit's drawoverhead microbenchmark
(#63: DrawArrays, no state change) by 4.07856% +/- 0.540517% (n=850).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8721>
Reconfiguring the URB partitioning is likely to cause shader stalls,
as the dividing line between each stage's section of memory is moving.
(Technically, 3DSTATE_URB_* are pipelined commands, but that mostly
means that the command streamer doesn't need to stall.) So it should
be beneficial to update the URB configuration less often.
If the previous URB configuration already has enough space for our
current shader's needs, we can just continue using it, assuming we
are able to allocate the maximum number of URB entries per stage.
However, if we ran out of URB space and had to limit the number of
URB entrties for a stage, and the per-entry size is larger than we
need, we should reconfigure it to try and improve concurrency.
So, we begin tracking the last URB configuration in the context,
and compare against that when updating shader variants.
Cuts 36% of the URB reconfigurations (excluding BLORP) from a
Shadow of Mordor trace, and 46% from a GFXBench Manhattan 3.0 trace.
One nice thing is that this removes the need to look at the old
prog_data when updating shaders, which should make it possible to
unbind shader variants without causing spurious URB updates.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8721>
When calculating a URB configuration, we start with a notion of how
much space each stage /wants/ (to achieve the maximum amount of
concurrency), but sometimes fall back to giving it less than that,
because we don't have enough space. (Typically, this happens when
the per-stage size is large, or there are many stages, or both.)
We now output a "constrained" boolean which is true if we weren't
able to satisfy all the "wants" due to a lack of space.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8721>
gallium automatically sums up the per-stage buffers if this isn't set,
and some drivers (e.g., amdvlk) export UINT_MAX here which breaks the universe
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8742>
To implement it in midgard, we just need to read the image_size sysval.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Implements load store opreations as midgard_op_ld_image_* and
midgard_op_st_image_*.
Implements midgard_op_lea_tex, which takes an image coordinate and
returns it's memory address.
Image atomics are implemented as a combination of midgard_op_lea_tex and
the usual midgard atomic opcodes.
Currently we don't support multisampled shader images.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Image coordinates are 16-bit long in midgard, so we must lower them
before emitting image opcodes.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Since there's no hardware support for it, we use a sysval to implement
nir_intrinsic_image_size.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Each shader image attribute buffer descriptor needs a continuation,
meaning that each image attribute buffer is double the size of a common
attribute buffer.
For compute and fragment shaders, we allocate a single buffer with
enough space for all the attribute descriptors and attribute buffer
descriptors.
For vertex shaders, we do it separately to acomodate for the way
descriptors are currently allocated there.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Implements gallium images endpoint.
If an AFBC resource is bound to an image, we convert it to tiled, since
images need pixel-level granularity and AFBC doesn't allow for that.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Adds a helper function to convert a resource to a chosen modifier.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Adds 3D attribute buffer continuations to pandecode and a message to
keep track of which buffer continuations we aren't decoding yet.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Because attribute continuations aren't considered whole attributes, we
need to increase the total number of attributes for each continuation
when decoding, otherwise we will end up missing a buffer for every
continuation we have.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8066>
Below Deqp CTS failure is seen on KBL GT1(tested on 0x5906) only ,
GT2 all test passes, changing the max shader geometry to 256
(previous 640) fixes all failure tests.Similar issues on
CML GT1 (Gen9) is fixed
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8550
dEQP-GLES31.functional.geometry_shading.layered.
render_with_default_layer_cubemap
render_with_default_layer_3d
render_with_default_layer_2d_array
Signed-off-by: Abhishek Kumar <abhishek4.kumar@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8731>
Mipmaps+layers should be investigated and mipmaps support added
for previous gens (GFX8-9).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
This is the main function that enables/disables HTILE for mipmaps.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
This can probably be optimized further by checking if the levels
are contiguous in memory.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
It's completely useless to decompress or resummarize levels that
are not compressed using HTILE.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
With HTILE mipmaps support, we should check if the base level
currently in use supports compression.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
This doesn't change behevior since the driver currently doesn't
support HTILE for mipmaps and also because we can only clear the
whole array layers at once. This improves consistency regarding
the fast clear color path.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
GFX10 can only compress the first level in the mip tail.
GFX9+ is not yet supported because mips are interleaved.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8124>
The vulkan cond rendering hook is quite different than the
traditional gallium one so add a new interface for it.
This just conditionalises rendering on the memory location.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8182>
Attachment clears have to respect cond rendering, so they can't
call clear texture directly, they have to create temporary
surfaces and clear via those.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8182>
There is a need to create arbitrary surfaces for clearing,
so split out the templating from the storing to img->vk_surface
so temporary surfaces can be created for clearing.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8182>
Disable compression in iris_flush_resource if the resource lacks a
modifier. When a caller wants to prepare such a resource for sharing
(via eglCreateImage for example), this change enables all reference
holders to access the resource in a common manner - without compression.
This fixes misrendering with 3D-accelerated qemu. A piglit test which
reproduces qemu's behavior, ext_image_dma_buf_import-export-tex, is also
enabled to pass.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2678
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8663>
Some drivers need to be able to remove compression from resources before
they are handed to consumers that wouldn't understand or expect it.
Cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8663>
Many entries in the dri2_format_table have _DRI_IMAGE_FORMAT_NONE as the
dri_format. Make the result of dri2_get_mapping_by_format a tad more
well-defined by returning NULL when this format is passed into it.
Cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8663>
no border colors here either
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Drive-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8714>
we aren't using border colors here, so this should be fine (and more compatible)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Drive-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8714>
It is currently a bitset on top of a uint64_t but there are already
more than 64 values. Change to use BITSET to cover all the
SYSTEM_VALUE_MAX bits.
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8585>
All uses are passing variables of either nir_var_shader_in or
nir_var_shader_out modes. Note that currently there are more than 64
system values, so the uint64_t wouldn't be enough anyway.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8585>
