By expanding the meta data about resources in the cache we can match more
resources such as 3D textures, samplers and render targets.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11241>
Uses the same set of cases. This is a standalone C program because the
easy way of hooking into the disassembler from Python with subprocesses
was slow. This seems cleaner anyway.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
These are lines of assembly that look valid but are not, and should
raise a parser error but not otherwise crash the assembler or produce
invalid code.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
These are valid pairs of hexdumped assembled instructions and the
corresponding disassembly, to be used to regression test both the
assembler and the disassembler.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
When we bring up the Valhall compiler in Mesa, we will like to have a
disassembler in native code, so we shouldn't write our disassembler in
Python. Instead, we write a disassembler generator in Python with mako
templates, which will produce a va_disasm_instr entrypoint from the
architecture defined in ISA.xml and valhall.py.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
Logic described in the "Uniform/constant restrictions" section of the
Valhall specification. (You know, my Valhall specification. Is there
another one?)
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
This Python script acts as a standalone assembler. It takes Valhall
instructions with Mesa-flavour syntax, parses them, errors out if there
are syntax errors, and writes out an assembled binary if there are not.
It also is available as a programmatic interface for automated testing.
While this attempts to handle syntax errors, it does not check
semantics. It will happily compile programs that fault, provided each
instruction locally 'looks' plausible.
The code itself is quite small, despite supporting most of the known
ISA, because the syntax is regular and the heavylifting is done by
ISA.xml and valhall.py.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
This Python module parses the ISA.xml file added in the previous
commits, extracts all the useful information, and combines it with
extra annotations. In total, it provides a programmatic way to interface
with the Valhall instruction set.
from valhall import instructions, enums
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
This handwritten file is the product of over a hundred hours of
reverse-engineering and represents the sum of what I've learned about
the Valhall architecture. It will be used in the next commits as the
backbone of a Valhall toolchain.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12025>
GALLIVM_PERF_NO_OPT is "belond" to GALLIVM_PERF environment variable,
not GALLIVM_DEBUG. when GALLIVM_PERF=nopt is passed to llvmpipe,
"-sroa -early-cse -simplifycfg -reassociate -constprop -instcombine -gvn"
should not be printed. Those llvm optimation techniques should only be
printed when the default(-O2) optimation is enabled.
$ GALLIVM_PERF=nopt GALLIVM_DEBUG=dumpbc glmark2
Before apply this patch:
Invoke as "opt -sroa -early-cse -simplifycfg -reassociate -mem2reg -constprop -instcombine -gvn ir_setup_variant_0.bc | llc -O2 [-mcpu=<-mcpu option>] [-mattr=<-mattr option(s)>]"
After apply this patch:
Invoke as "opt -mem2reg ir_fs304_variant0.bc | llc -O0 [-mcpu=<-mcpu option>] [-mattr=<-mattr option(s)>]"
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: suijingfeng <suijingfeng@loongson.cn>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11994>
The code in dri_make_current just checks the value of the pointers
to decide to update texture_stamp or not. This is buggy since a new
allocated drawable could share the same address with the previous
released drawable. Fix the stale pointer issue by always resetting
these pointers to NULL in dri_unbind_context.
v2:
Move the reset codes to the end of the function.
Signed-off-by: Lepton Wu <lepton@chromium.org>
Cc: mesa-stable
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12050>
The current code we have for this is a bit of a mess, likely due to
trying too hard to put it in anv_android.c. The external_format bit in
anv_image, for instance, really means "quit creation early" which is
something we want to do for AHardwareBuffer imports regardless of
whether or not they use a native format. It gets set both by declaring
an AHardwareBuffer external handle type and by VkExternalFormatANDROID.
However, VkExternalFormatANDROID is only allowed for AHardwareBuffer
imports. If we ever did get an external format outside the context of
an AHardwareBuffer import, we would end up with a useless partially
created image.
When we detect an AHardwareBuffer import, we punt off to a function in
anv_android.c that does nothing interesting but call anv_create_image
with AUX disabled and external_format = true. The aux disable here is
useless because the actual isl_surf layout is done by resolve_ahw_image
which also sets ISL_SURF_USAGE_DISABLE_AUX_BIT. As far as external
formats go, anv_image_from_external() sets it regardless of whether or
not there is actually an external format.
This commit replaces anv_image::external_format with anv_image::from_ahb
which is the thing we actually want to track for this. We delete
anv_image_from_external and a bunch of the external_format handling
because it's all useless. The end result is massively simpler and,
while it appears to blur the boundary between Android code and the rest
of the driver, it makes the whole flow more obvious.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12040>
As the panvk_cmd_alloc_fb_desc function might be called outside a draw,
without a pipeline having been bound to the command buffer.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12019>
In some cases, there will be an open batch because an event operation
has been recorded, or a non-rendering command.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12019>
There are two distinct cases:
- The last member of a shader storage block (length determined at run-time)
- Implicitly-sized array (length determined at link-time)
Fixes: 273f61a005 ("glsl: Add parser/compiler support for unsized array's length()")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11952>
ARB_shader_storage_buffer_object extension (promoted to core in 4.3) allows us
to call .length() method on arrays declared without an explicit size. The length is
determined at link time as a maximum array access.
Fixes: 273f61a005 ("glsl: Add parser/compiler support for unsized array's length()")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11952>
The viewport value computations done in lima_set_viewport_states
can result in a negative value for viewport.
These could end up converted to unsigned values in
lima_clip_scissor_to_viewport causing crashes from invalid
scissor commands.
Prevent this by limiting the minimum value to zero as is already
done for the left and bottom values.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2938
Cc: mesa-stable
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12055>
The comment was incorrect: we can have N draws using the
same mode with N > 1 (eg: GL_QUAD_STRIP draws
cannot be merged).
This commit fixes the drawing code to use the correct draw
function.
This fixes a hang in Starsector (see issue #5086).
Fixes: b328d8e9bc ("dlist: use an union instead of allocating a 1-sized array")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11978>
When multiview is enabled, queries must begin and end in the
same subpass and N consecutive queries are implicitly used,
where N is the number of views enabled in the subpass.
Implementations decide how results are split across queries.
In our case, only one query is really used, but we still need
to flag all N queries as available by the time we flag the one
we use so that the application doesn't receive unexpected errors
when trying to retrieve values from them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
When multiview is enabled, we no longer care about when a particular
attachment is first or last used in a render pass, since not all views
in the attachment will meet that criteria. Instead, we need to track
each individual view (layer) in each attachment and emit our stores,
loads and clears accordingly.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
The Vulkan spec states that when multiview is enabled the number of
layers in the framebuffer is set to one and that each attachment
must then have at least as many layers as referenced by view masks
in the subpasses in which is used.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
We implement multiview by replicating draw commands for all enabled
views and setting a command buffer state for the currently active
view we are broadcasting to.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
Some floating atomic instructions are not available on GFX8-9.
No LLVM support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12060>
v1. Hyunjun Ko <zzoon@igalia.com>
- Add to hanlde VK_DESCRIPTOR_POOL_CREATE_HOST_ONLY_BIT_VALVE
- Don't support VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT and
VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
v2. Hyunjun Ko <zzoon@igalia.com>
- Fix some indentations and nitpicks.
- Add the extension to features.txt
v3. Hyunjun Ko <zzoon@igalia.com>
- Remove unnecessary asserts.
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9322>
When a dedicated allocation is not required, ignore it and suballocate.
Fixes dEQP-VK.api.invariance.random.
Cc: 21.2 mesa-stable
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12072>
When the dot product uses a source which can be optimized to a scalar,
after a bunch of nir optimization steps the source to fsum will be a scalar
with a x replicate swizzle. Hence nir_src_num_components is just 1 and the
fsum was just a no-op which is not correct. Arguably this could be optimized
a bit better, but just determine the number of addends by using nir_op_infos
instead (the operand fetch was fixed already by 39a938ecf4 doing the same).
Fixes: 4eb0475b5a ("gallivm/nir: add fsum support")
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12066>
