Fixes a crash in svga_context_flush_buffers() if we use the 'draw' module
for AA lines (when the device doesn't support that feature). We need to
initialize this list before we setup the swtnl pieces.
Found/fixed by Charmaine Lee.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
create_mov() was fixed up to handle neg/abs properly for interal mov's,
using absneg.f, but forgot to fix it for TGSI MOV's. The problem with
using add.f to handle negated mov's is that we can only take a single
const reg src. So:
MOV TEMP[n], -CONST[m]
would turn into:
add.f Rdst, (neg)CONST[m], 0.0
which would not work. Anyways, just remove the extra code and always
use create_mov() which DTRT.
This fixes piglit vs-op-neg-int test.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Keep track of whether we actually have any sam instructions in the
resulting shader, rather than using TGSI SAMP declarations. If the sam
instruction is optimized out, because the result is not used, we don't
want to emit texture state, etc. In fact emitting sampler state and/or
setting PIXLODENABLE bit when there are no texture fetches seems to
cause lockup.
In theory this should never happen for a "normal" shader, unless the
state tracker is wonky. But it is a very real possibility for binning
pass shaders.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2: move allocation to a function as first step
to clean vid_enc_EncodeFrame
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
For TEX instructions, the set of samplers and sampler views should
be consistent. The XA state tracker sometimes passes an inconsistent
set of samplers and sampler views. Rather than assert and die, issue
a warning.
v2: add debugging code to detect inconsistent state.
v3: also check for null sampler in svga_state_tss.c
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
renderer_copy_prepare was setting the first sampler but never telling
the cso code how many samplers were actually used. Fix this.
Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Binding a new destination may cause the svga driver to emit draw calls
while propagating the surface. Make sure this doesn't happen in the middle
of sampler state setup where state may be incosistent.
In practice, surface propagation should never happen here and even if it did,
it wouldn't be a valid reason for the svga driver to emit partially set up
state, but to avoid future uncertainties, make sure this doesn't happen
anyway.
Found while auditing the state tracker for inconsistent sampler state /
sampler view setup.
Cc: "10.1" <mesa-stable@freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
The kernel driver expects the class to be based on chipset generation
rather than VP generation. Make sure to pass 90b1 for NVDX chipsets
instead of 95b1.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77102
Fixes: 40dd777b33
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.1 10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubunutu.com>
Implement guest-backed surface sharing using prime fds. Previously only
legacy surfaces could use this functionality. Also use the vmwgfx 2.6
single-ioctl prime fd reference if available.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This opcode provide support for GL_ARB_texture_query_lod,
Signed-off-by: Dave Airlie <airlied@redhat.com>
[imirkin: rebase, docs update]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
OpenBSD does not have DT_NEEDED entries for libc by design,
over concerns how the symbols would be referenced after
changing the major version of the library.
So avoid -no-undefined checks on OpenBSD as they will fail.
v2: don't include the -no-undefined libtool option in the variable
and change -Wl,--no-undefined references in Automake.inc as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76856
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The targets do not require expat or selinux. Use GALLIUM_COMMON_LIB_DEPS
which provides the core requirements for each gallium target.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The build system will use g++ to link the static library due to the
dummy.cpp source(s). Thus one does not need the explicit link against
stdc++.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The build system does not know that the static library is C++.
Mention the cpp file to trigger generation of the proper variable
and drop the hacky stdc++ linking.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Rather than copying the core four dependencies all over gallium,
introduce the above variable to avoid all the duplication.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
With recent commit we started de-duplicating all of the compiler/
linker flags moving their handling inside Automake.inc.
This did not take into consideration that the above variable was set
at configure time, leading to issues on certain build combinations.
Move the variable to where it's used/handled thus cleaning up
configure.ac.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 96e8b916a7.
In the case of VCE encoding with raw YUV file, CPU load directly
to VRAM is faster than combination of CPU writing to GTT and
then blit to VRAM with GPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: fix whitespace errors, minor coding style changes
Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
We are checking for no-ops in the CSO module for both of these items
so there's no reason to do it in the driver.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
As we do for sampler states in single_sampler_done() and many other
CSO functions.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We want to call pipe->set_sampler_views() with count being the
maximum of the old number of sampler views and the new number.
This makes sure we null-out any old sampler views.
We already do the same thing for sampler states in single_sampler_done().
Fixes some assertions seen in the VMware driver with XA tracker.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This is to avoid running out of query buffer space due to winsys
limitations. Instead of a fixed size per screen pool of query buffers,
use a slab allocator that allocates a new slab if we run out of space
in the first one.
v2: Correct email addresses.
v3: s/8192/VMW_QUERY_POOL_SIZE/. Improve documentation and log message.
Reported-and-tested-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This adds a gallium cap that allows us to fake GL3.0 by
not exposing MSAA on sw rendering.
It also forces the extra extensions needed for GL3.2.
Signed-off-by: Dave Airlie <airlied@redhat.com>
