For each mipmaps, the driver will store the clear values (8-bytes)
and the TC-compat zrange value (4-bytes).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The workaround was entirely in common code, and it's needed in radeonsi
too so just always do it when necessary. Fixes
KHR-GL45.shader_image_load_store.advanced-allStages-oneImage on gfx9
with LLVM 8.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
16-bit and 32-bit values match hardware values but 8-bit doesn't.
This fixes dEQP-VK.pipeline.input_assembly.* with 8-bit index.
Fixes: 372c3dcfdb ("radv: implement VK_EXT_index_type_uint8")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl
Put the uncached GTT type at a higher index than the visible VRAM type,
rather than having GTT first.
When we don't have dedicated VRAM, we don't have a non-visible VRAM
type, and the property flags for GTT and visible VRAM are identical.
According to the spec, for types with identical flags, we should give
the one with better performance a lower index.
Previously, apps which follow the spec guidance for choosing a memory
type would have picked the GTT type in preference to visible VRAM (all
Feral games will do this), and end up with lower performance.
On a Ryzen 5 2500U laptop (Raven Ridge), this improves average FPS in
the Rise of the Tomb Raider benchmark by up to ~30%. Tested a couple of
other (Feral) games and saw similar improvement on those as well.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
(Bas: CCing this to 19.2-rc due to high impact and limited complexity)
Make sure we read the updated data from the gpu in cases where WAIT_BIT
is not set.
Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only gfx9 and older use it to get InstanceID in VGPR1.
Ported from RadeonSI.
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Now that LLVM 9 will be released soon, we will only support
LLVM 8, 9 and master (10).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
A bunch of remaining issues including some that affect users.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111248
Fixes: ee21bd7440 "radv/gfx10: implement NGG support (VS only)"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This debug option allows vkGet[Instance/Device]ProcAddr() to succeed
even if the extension associated with the requested entrypoint was not
enabled.
This has come in handy in a few instances when debugging VR
applications, so I thought it would be good to have a cleaned up version
upstreamed.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This better matches all the other atomic intrinsics such as those for
SSBOs and shared variables where the sign is part of the intrinsic
opcode. Both generators (GLSL and SPIR-V) know the sign from the type
of the image variable or handle. In SPIR-V, signed min/max are separate
opcodes from unsigned.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Trivial extension that matches PAL.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This gives a nice boost, +20% at this time on my Vega 56. Shader
ballot should be enabled by default at some point but it reduces
performance a bit (-6%) with Wolfeinstein II. Enable it only for
Youngblood at the moment, like what we did for Talos in the past.
As a bonus point, it gets rid of some minor artifacts that only
happens when ballot is disabled for some reasons.
Cc: 19.2 <mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Shader ballot will be enabled by default for Wolfenstein
Youngblood. This follows what we did for sisched.
Cc: 19.2 <mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise hangs are possible. This register was already set for
GS and NGG.
Fixes: 5eaed7ecfc "radv/gfx10: enable support for NAVI10, NAVI12 and NAVI14"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Should take the max of the 2.
Fixes: ea337c8b7e "radv/gfx10: fix VS input VGPRs with the legacy path"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The script doesn't handle them correctly and D16_UNORM_S8_UINT
isn't supported by the hardware, mark it as invalid.
This fixes warning when generating gfx10_format_table.h.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111393
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Took the freedom to enable dfsm even though I don't have benchmark
results yet, but it seems Raven-like.
Rest is from radeonsi.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Quite useless without DCC for LAYOUT_GENERAL.
Fixes: b4dad3afaa Revert "radv: Do not decompress on LAYOUT_GENERAL."
Acked-by: Dave Airlie <airlied@redhat.com>
Causes issues with a bunch of games with DXVK.
Fixes: 50add1b33a "radv: Do not decompress on LAYOUT_GENERAL."
Acked-by: Dave Airlie <airlied@redhat.com>
v2: add to series
v3: update Makefile.sources
v4: don't remove a comment and break statement
v4: use nir_can_move_instr
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows enabling the shader info keeping on a per shader basis.
Also disables the cache on a per shader basis.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Test that found this: dEQP-VK.geometry.layered.1d_array.secondary_cmd_buffer
Fixes: 49e6c2fb78 "radv: Store color/depth surface info in attachment info instead of framebuffer."
Reviewed-by: Dave Airlie <airlied@redhat.com>
Can result in different shaders.
Fixes: 8a86908e9a "radv/gfx10: add Wave32 support for vertex, tessellation and geometry shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of having the three values everywhere. This is also more
future proof if we want the driver to make those decisions eventually.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Previously we relied on stores not using DCC but that is going to
change, so disable compression explicitly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
