There are a few dynamic bits, namely binding table and sampler addresses,
but most of it is static and really belongs in the pipeline. It certainly
doesn't belong in flush_compute_descriptor_set. We'll use the same state
merging trick we use for gen7 DEPTH_STENCIL.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Now that we have anv_shader_bin, they're completely redundant with other
information we have in the pipeline. For vertex shaders, we also go
through way too much work to put the offset in one or the other field and
then look at which one we put it in later.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Ever since the early days of the Vulkan driver, we've been setting up the
lists of relocations at EndCommandBuffer time. The idea behind this was to
move some of the CPU load out of QueueSubmit which the client is required
to lock around and into command buffer building which could be done in
parallel. Then QueueSubmit basically just becomes a bunch of execbuf2
calls.
Technically, this works. However, when you start to do more in QueueSubmit
than just execbuf2, you start to run into problems. In particular, if a
block pool is resized between EndCommandBuffer and QueueSubmit, the list of
anv_bo's and the execbuf2 object list can get out of sync. This can cause
problems if, for instance, you wanted to do relocations in userspace.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
It really should have gone here all along. We were trying a bit too hard
to make it gen-agnostic just because it didn't have any #if's.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
With one small genxml change, the two versions were basically identical.
The only differences were one #define for HSW+ and a field that is missing
on Haswell but exists everywhere else.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
vkBeginCommandBuffer and vkCmdExecuteCommands both call into the
gen-specific emit_state_base_address function and vkEndCommandBuffer
belongs with begin.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Provides an FPS increase of ~30% on the Sascha triangle and multisampling
demos.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Nanley Chery:
(rebase)
- Resolve conflicts with new anv_batch_emit macro
(amend)
- Handle a QPitch TODO
- Emit 3DSTATE_HIER_DEPTH_BUFFER on pre-BDW systems
- Only use HiZ for single-subpass renderpasses
- Emit the HiZ instruction before the stencil instruction to follow the
optimized clear sequence specified in the PRMs
- Don't modify clear params
- Enable resolves when a HiZ buffer is used to ensure depth buffer validity
Provides an FPS increase of ~15% on the Sascha triangle and multisampling
demos.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Initially, we had intended set_subpass to be an interesting function that
did whatever (presumably a lot) setup we needed for a subpass. In reality,
it just sets a pointer and a dirty bit and then emits depth and stencil
state. When we call BeginCommandBuffer on a secondary, there's no point in
setting depth and stencil state since it will already be set by the
primary. Instead, the only thing we need to do at the start of a secondary
is set the subpass pointer and the dirty bit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
We have a DIRTY_RENDER_TARGETS flag and that makes a lot more sense than
just dirtying fragment descriptors. We're checking for it in some of the
gen7 code but unfortunately, nothing was setting it and it didn't do what
it was supposed to do in cmd_buffer_flush_state.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Without this bit set, the value in "L3 Atomic Disable" won't get applied by
the hardware so we won't properly get L3 atomic caching.
Fixes dEQP-VK.spirv_assembly.instruction.compute.opatomic.compex and 198 of
the dEQP-VK.image.atomic_operations.* tests on HSW
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This is the only remaining part of genX_l3.c and there's really no good
reason for it to be in its own file.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This solves a race condition where we can end up having different stages
stomp on each other because they're all trying to scratch in the same BO
but they have different views of its layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Ever since c2581a9375, the binding table layout has depended on the
pipeline. This means that whenever we change pipelines we also need to
re-emit binding tables for the new layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
It's tiny and fully generic so there's really no reason for it to be in a
gen7-specific file.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
It used to be based on the framebuffer which isn't quite right.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Also, we don't actually need it for clipping because meta always colors
inside the lines and, for all other operations, the user is required to set
a scissor. Since DRAWING_RECTANGLE stalls the GPU, we want to emit it as
little as possible.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This is in contrast to emitting it directly in vkCmdPipelineBarrier. This
has a couple of advantages. First, it means that no matter how many
vkCmdPipelineBarrier calls the application strings together it gets one or
two PIPE_CONTROLs. Second, it allow us to better track when we need to do
stalls because we can flag when a flush has happened and we need a stall.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Instead of blasting it out as part of the pipeline, we put it in the
command buffer and only blast it out when it's really needed. Since the
PUSH_CONSTANT_ALLOC commands aren't pipelined, they immediately cause a
stall which we would like to avoid.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
