We should remove the relocations which caused a validation failure
from the list, so that the kernel receives only the validated ones.
NOTE: This is a candidate for the 7.11 branch.
(cherry picked from commit 64ab39b035)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_cs.c
That code drops performance in Unigine Heaven and Tropics
by a factor of 10. That's too crazy even for a debug build.
NOTE: This is a candidate for the 7.11 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit c251d83d91)
This patch add the support for 24bpp in the dri/swrast implementation.
See http://bugs.freedesktop.org/show_bug.cgi?id=23525
Signed-off-by: Marc Pignat <marc at pignat.org>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit cfec000e75)
The previous commit removed the last use of this field.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit f73caddd33)
The purpose of the (irb->draw_offset & 4095) != 0 check was to ensure
that we don't have XYy offsets into a tile, since Gen4 hardware doesn't
support that. However, it's insufficient: there are cases where
draw_offset & 4095 is 0 but we still have a Y-offset. This leads to an
assertion failure in brw_update_renderbuffer_surface with tile_y != 0.
Instead, simply call intel_renderbuffer_tile_offsets to compute the
actual X/Y offsets and check if either are non-zero. This makes both
the workaround and the assertion check the same things.
Fixes piglit test fbo-generatemipmap-formats, and should also fix
bugs #34009 and #39487.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34009
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39487
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad@chad-versace.us>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 15c0bc5eef)
We were neglecting to load dvdx and dvdy. v is not optional.
Fixes glslparsertests tex-grad-0[12345].frag on Broadwater/Crestline.
(We still need an execution test using sampler1D.)
NOTE: This is a candidate for the 7.11 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 3e1fd13f60)
Commit 1a339b6c71 made
st_ChooseTextureFormat map GL_RGBA with type GL_UNSIGNED_BYTE
to PIPE_FORMAT_A8B8G8R8_UNORM.
The image format for ARGB pixmaps is PIPE_FORMAT_B8G8R8A8_UNORM
however. This mismatch caused the texture to be recreated in
st_finalize_texture.
NOTE: This is a candidate for the 7.11 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39209
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Brian Paul <brianp@vmware.com>
The index buffer state emit only occurred if there was an IB in place
and we were in either a new batch or a new IB state. But because we
only flagged new IB state if IB state changed from the last IB state
we calculated, we could simply never emit IB state after batchbuffer
wraps if the first draw didn't use the IB and we didn't actually
change the IB.
Fixes piglit glx-multi-context-ib-1.
(cherry picked from commit 818db3848b)
It turns out that internally the texture cache gets flushed in a
couple of cases, particularly around 2D operations mixed with 3D. In
almost all cases one of those happens between rendering to an
FBO-attached texture and rendering from that texture. However, as of
the next patch, glean tfbo (and the new fbo-flushing-2 test) would
manage to get stale texture values because one of those flushes didn't
occur. The intention of this code was always to get the render cache
cleared and ready to be used from the sampler cache (and it does on <=
gen4), so this just catches gen5 up.
This patch was also tested to fix fbo-flushing on gen7.
(cherry picked from commit 185868c9c2)
When emitting a MAC instruction in a vertex shader, brw_vs_emit()
calls accumulator_contains() to determine whether the accumulator
already contains the appropriate addend; if it does, then we can avoid
emitting an unnecessary MOV instruction.
However, accumulator_contains() wasn't checking the val.negate or
val.abs flags. As a result, if the desired value was the negation, or
the absolute value, of what was already in the accumulator, we would
generate an incorrect shader.
Fixes piglit test vs-refract-vec4-vec4-float.
Tested on Gen5 and Gen6.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d92463d5dc)
On Ivybridge, the shadow comparitor goes in the first slot, rather than
at the end. It's not necessary to send u, v, and r.
Fixes tests texturing/texdepth and glean/fbo.
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 572f631895)
Commit 53c89c67f3 ("i965: Avoid generating
MOVs for assignments of expressions.") added the line "this->result =
reg_undef" all over the code. Unfortunately, since Eric developed his
patch before I landed Ivybridge support, he missed adding it to
fs_visitor::emit_texture_gen7() after rebasing.
Furthermore, since I developed TXD support before Eric's patch, I
neglected to add it to the gradient handling when I rebased.
Neglecting to set this causes the visitor to use this->result as storage
rather than generating a new temporary. These missing statements
resulted in the same register being used to store several different
values.
Fixes the following piglit tests on Ivybridge:
- glsl-fs-shadow2dproj.shader_test
- glsl-fs-shadow2dproj-bias.shader_test
NOTE: This is a candidate for the 7.11 branch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 156cef0fba)
Previously the code would just look at deref->array->type to see if it
was a constant. This isn't good enough because deref->array might be
another ir_dereference_array... of a constant. As a result,
deref->array->type wouldn't be a constant, but
deref->variable_referenced() would return NULL. The unchecked NULL
pointer would shortly lead to a segfault.
Instead just look at the return of deref->variable_referenced(). If
it's NULL, assume that either a constant or some other form of
anonymous temporary storage is being dereferenced.
This is a bit hinkey because most drivers treat constant arrays as
uniforms, but the lowering pass treats them as temporaries. This
keeps the behavior of the old code, so this change isn't making things
worse.
Fixes i965 piglit:
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-uniform-array-mat[234]-index-col-rd
vs-uniform-array-mat[234]-index-col-row-rd
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 156f85336f)
Leaving the unused registers with other values caused assertion
failures and other problems in places that blindly iterate over all
sources.
brw_vs_emit.c:1381: get_src_reg: Assertion `c->regs[file][index].nr !=
0' failed.
Fixes i965 piglit:
vs-uniform-array-mat[234]-col-row-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-uniform-array-mat[234]-index-row-rd
vs-uniform-mat[234]-col-row-rd
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit fbeb68e880)
This fixes many cases of accessing arrays of matrices using
non-constant indices at each level.
Fixes i965 piglit:
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
Fixes swrast piglit:
fs-temp-array-mat[234]-index-col-rd
fs-temp-array-mat[234]-index-col-row-rd
fs-temp-array-mat[234]-index-col-wr
fs-uniform-array-mat[234]-index-col-rd
fs-uniform-array-mat[234]-index-col-row-rd
fs-varying-array-mat[234]-index-col-rd
fs-varying-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-rd
vs-temp-array-mat[234]-index-col-row-rd
vs-temp-array-mat[234]-index-col-wr
vs-uniform-array-mat[234]-index-col-rd
vs-uniform-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-rd
vs-varying-array-mat[234]-index-col-row-rd
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d6e1a8f714)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 601428d2bb)
If the non-constant index was in the LHS of an assignment, any
existing condititon on that assignment would be lost.
Fixes i965 piglit:
fs-temp-array-mat[234]-col-row-wr
fs-temp-array-mat[234]-index-col-row-wr
fs-temp-array-mat[234]-index-col-wr
fs-temp-array-mat[234]-index-row-wr
vs-varying-array-mat[234]-index-col-wr
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 5f83dfe5b7)
The previous implementation could easily get tricked if the LHS of an
assignment included a non-constant index that was "inside" another
dereference. For example:
mat4 m[2];
m[0][i] = vec4(0.0);
Due to the way it tracked whether the array was being assigned, it
would think that the non-constant index was in an r-value. The new
code fixes that by tracking l-values and r-values differently. The
index is also replaced by cloning the IR and replacing the index
variable instead of the odd way it was done before.
v2: Apply some simplifications suggested by Eric Anholt. Making
assignment_generator::rvalue be ir_dereference instead of ir_rvalue
simplified the code a bit.
Fixes i965 piglit fs-temp-array-mat[234]-index-wr and
vs-varying-array-mat[234]-index-wr.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34691
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 1731ac3086)
To make bisects work, this also squashes in:
glsl: Correctly return progress from lower_variable_index_to_cond_assign
lower_variable_index_to_cond_assign runs until it can't make any more
progress. It then returns the result of the last pass which will
always be false. This caused the lowering loop in
_mesa_ir_link_shader to end before doing one last round of
lower_if_to_cond_assign. This caused several if-statements (resulting
from lower_variable_index_to_cond_assign) to be left in the IR.
In addition to this change, lower_variable_index_to_cond_assign should
take a flag indicating whether or not it should even generate
if-statements. This is easily controlled by
switch_generator::linear_sequence_max_length. This would generate
much better code on architectures without any flow contol.
Fixes i915 piglit regressions glsl-texcoord-array and
glsl-fs-vec4-indexing-temp-src.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c1e591eed4)
Other code will soon need to know if an array needs lowering based
exclusively on the storage mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit d2296e784a)
There's no reason for it to be there, and another class that may not
have access to the visitor will need it soon.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 8d5f3cef79)
The GLSL 1.20 and later specs say:
"Recursion is not allowed, not even statically. Static recursion is
present if the static function call graph of the program contains
cycles."
Recursion is detected and rejected both a compile-time and at
link-time. The complie-time check happens to detect some cases that
may be removed by various optimization passes. The spec doesn't seem
to allow this, but other vendors (e.g., NVIDIA) appear to only check
at link-time after all optimizations.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33885
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 02c5ae1b3f)
This also squashes in the following commit to make sure that bisects
in scons builds work:
glsl: Add ir_function_detect_recursion.cpp to SConscript.
(cherry picked from commit 76bccaff0c)
Also clarify the documentation for one of the parameters.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 1ad3ba4ad9)
u_vbuf_upload_buffers modifies the buffer offsets. If they are not
restored, and any of the vertex formats is not supported natively, the
next u_vbuf_mgr_draw_begin call will translate the vertex buffers with
incorrect buffer offsets.
(cherry picked from commit afc160e1c8)
Signed-off-by: Marek Olšák <maraeo@gmail.com>
