The _mesa_base_fbo_format variant doesn't handle some texture
internalformats, such as "3".
Fixes:
fbo-blending-formats.
fbo-alphatest-formats
EXT_texture_sRGB/fbo-alphatest-formats
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit cd3568c329)
We were letting any old operand through, which generally resulted in
assertion failures later.
Fixes array-logical-xor.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 756c262756)
This prevents later errors (including an assertion failure) from
cascading the failure.
Fixes invalid-equality-04.vert.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33303
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit 175829f1a8)
We just do the AST-to-HIR processing, and only push the instructions
if needed in the constant false case.
Fixes glslparsertest/glsl2/logic-02.frag
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9e04b190b5)
We just do the AST-to-HIR processing, and only push the instructions
if needed in the constant true case.
Fixes glslparsertest/glsl2/logic-01.frag
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 7ec0c97896)
By always using a boolean, we should generally avoid further
complaints. The failure case I see is logic_not, where the user might
understandably make the mistake of using `!' on a boolean vector (like
a piglit case did recently!), and then get a further complaint that
the new boolean type doesn't match the bvec it gets assigned to.
Fixes invalid-logic-not-06.vert (assertion failure when the bad type
ends up in an expression and ir_constant_expression gets angry).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33314
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 01822706ec)
Prior to Gen6, we use the GS for breaking down quads, quad-strips,
and line loops. On Gen6, earlier stages already take care of this,
so we never need the GS.
Since this code is likely completely untested, remove it for now.
We can write new code when enabling real geometry shaders.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 35b3f597bd)
This should make it easier to cross-reference the code and hardware
documentation, as well as clear up any confusion on whether constants
like CMD_3D_WM_STATE mean WM_STATE (pre-gen6) or 3DSTATE_WM (gen6+).
This does not rename any pre-gen6 defines.
(cherry picked from commit e31defc825)
According to https://bugs.freedesktop.org/show_bug.cgi?id=34280
commit 5d1387b2da causes the font corruption
problems people have been seeing under various apps and gnome-shell on r200
cards.
This commit changed (loosened) the check for using the memcpy path in the
former al88 / al1616 texstore functions, which are now also used to
store rg texures. This patch restores the old strict check in case of
al textures. I've no idea why this fixes things, since I don't know the
code in question at all. But after seeing the bisect in bfdo34280 point
to this commit, I gave this fix a try and it fixes the font issues seen on
r200 cards.
[airlied:
r200 has no native working A8, so it does an internal storage format of AL88
however srcFormat == internalFormat == ALPHA when we get to this point,
so it copies, but it wants to store into an AL88 not ALPHA so fails,
I'll also push a piglit test for this on r200].
Many thanks to Nicolas Kaiser who did all the hard work of tracking this down!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e338a1b0ce)
The spec doesn't state it should be an error, but. We have this piglit test
useprogram-inside-begin that passes with this commit. No idea what's correct.
NOTE: This is a candidate for the 7.10 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 29ceeeba20)
NOTE: This is a candidate for the 7.10 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 1c95c3ef9c)
Conflicts:
src/mesa/state_tracker/st_context.h
The problem is: The second time the function is called with a new
internal format, strb->format is usually not PIPE_FORMAT_NONE.
RenderbufferStorage(... GL_RGBA8 ...);
RenderbufferStorage(... GL_RGBA16 ...); // had no effect on the format
Broken with: fd6f2d6e57
Test: piglit/fbo-storage-completeness
NOTE: This is a candidate for the 7.10 branch.
(if fd6f2d6e57 is cherry-picked as well)
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 49d4e803d3)
Conflicts:
src/mesa/state_tracker/st_cb_fbo.c
Lowered indirect addressing can create lots of immediates.
Fixes piglit/glsl-fs-uniform-array-7 on r300g.
NOTE: This is a candidate for the 7.10 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit ff038170ff)
Passing ralloc_vasprintf_append a 0-byte allocation doesn't work. If
passed a non-NULL argument, ralloc calls strlen to find the end of the
string. Since there's no terminating '\0', it runs off the end.
Fixes a crash introduced in 14880a510a.
(cherry-picked from commit a7d350790b)
Eliminates unaligned accesses on strict architectures. Spotted by Jay
Estabrook.
Signed-off-by: Matt Turner <mattst88@gmail.com>
NOTE: This is a candidate for the 7.10 branch.
(cherry picked from commit 86852236a3)
GetVertexAttrib*{,ARB} is no longer aliased to the NV calls.
This fixes tracing yofrankie with apitrace, given it requires accurate
results from GetVertexAttribiv*.
NOTE: This is a candidate for the stable branches.
The 095-recursive-define test case was triggering infinite recursion
with the following test case:
#define A(a, b) B(a, b)
#define C A(0, C)
C
Here's what was happening:
1. "C" was pushed onto the active list to expand the C node
2. While expanding the "0" argument, the active list would be
emptied by the code at the end of _glcpp_parser_expand_token_list
3. When expanding the "C" argument, the active list was now empty,
so lather, rinse, repeat.
We fix this by adjusting the final popping at the end of
_glcpp_parser_expand_token_list to never pop more nodes then this
particular invocation had pushed itself. This is as simple as saving
the original state of the active list, and then interrupting the
popping when we reach this same state.
With this fix, all of the glcpp-test tests now pass.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32835
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9dacbe2226)
These were all written as generic list functions, (accepting and returning
a list to act upon). But they were only ever used with parser->active as
the list. By simply accepting the parser itself, these functions can update
parser->active and now return nothing at all. This makes the code a bit
more compact.
And hopefully the code is no less readable since the functions are also
now renamed to have "_parser_active" in the name for better correlation
with nearby tests of the parser->active field.
(cherry picked from commit 02d293c08e)
Since we never enable the GS on Sandybridge, there's no need to allocate
it any URB space.
Furthermore, the previous calculation was incorrect: it neglected to
multiply by nr_vs_entries, instead comparing whether twice the size of
a single VS URB entry was bigger than the entire URB space. It also
neglected to take into account that vs_size is in units of 128 byte
blocks, while urb_size is in bytes.
Despite the above problems, the calculations resulted in an acceptable
programming of the URB in most cases, at least on GT2.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 42a8057000)
Previously the macro would (ALIGN(value - alignment - 1, alignment)).
At the very least, this was missing parenthesis around "alignment -
1". As a result, if value was already aligned, it would be reduced by
alignment. Condisder:
x = ROUND_DOWN_TO(256, 128);
This becomes:
x = ALIGN(256 - 128 - 1, 128);
Or:
x = ALIGN(127, 128);
Which becomes:
x = 128;
This macro is currently only used in brw_state_batch
(brw_state_batch.c). It looks like the original version of this macro
would just use too much space in the batch buffer. It's possible, but
not at all clear to me from the code, that the original behavior is
actually desired.
In any case, this patch does not cause any piglit regressions on my
Ironlake system.
I also think that ALIGN_FLOOR would be a better name for this macro,
but ROUND_DOWN_TO matches rounddown in the Linux kernel.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Whitwell <keithw@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 7e809f0b8d)
Fixes piglit test glsl-vs-arrays-3 on Sandybridge, as well as garbage
rendering in 3DMarkMobileES 2.0's Taiji demo and GLBenchmark 2.0's
Egypt and PRO demos.
NOTE: This a candidate for stable release branches. It depends on
commit 9a21bc6401.
(cherry picked from commit 9d60a7ce08)
This is actually a squash of the following two commits. The first
caused a regression, and the second fixes it. The refactor of the
first is needed for another patch that fixes an SNB bug.
i965: Refactor Sandybridge implied move handling.
This was open-coded in three different places, and more are necessary.
Extract this into a function so it can be reused.
Unfortunately, not all variations were the same: in particular, one set
compression control and checked that the source register was not
ARF_NULL. This seemed like a good idea, so all cases now do so.
(cherry picked from commit 9a21bc6401)
i965: Fix null register use in Sandybridge implied move resolution.
Fixes regressions caused by commit 9a21bc6401, namely GPU hangs when
running gnome-shell or compiz (Mesa bugs #35820 and #35853).
I incorrectly refactored the case that dealt with ARF_NULL; even in that
case, the source register needs to be changed to the MRF.
NOTE: This is a candidate for the 7.10 branch (if 9a21bc6401 is
cherry-picked, take this one too).
(cherry picked from commit a019dd0d6e)
The BSpec says that interleave URB writes must be aligned, so this
patch fulfills that requirement.
This is half of patch 6c32477 from master.
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
