In some cases, there will be an open batch because an event operation
has been recorded, or a non-rendering command.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12019>
There are two distinct cases:
- The last member of a shader storage block (length determined at run-time)
- Implicitly-sized array (length determined at link-time)
Fixes: 273f61a005 ("glsl: Add parser/compiler support for unsized array's length()")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11952>
ARB_shader_storage_buffer_object extension (promoted to core in 4.3) allows us
to call .length() method on arrays declared without an explicit size. The length is
determined at link time as a maximum array access.
Fixes: 273f61a005 ("glsl: Add parser/compiler support for unsized array's length()")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11952>
The viewport value computations done in lima_set_viewport_states
can result in a negative value for viewport.
These could end up converted to unsigned values in
lima_clip_scissor_to_viewport causing crashes from invalid
scissor commands.
Prevent this by limiting the minimum value to zero as is already
done for the left and bottom values.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2938
Cc: mesa-stable
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12055>
The comment was incorrect: we can have N draws using the
same mode with N > 1 (eg: GL_QUAD_STRIP draws
cannot be merged).
This commit fixes the drawing code to use the correct draw
function.
This fixes a hang in Starsector (see issue #5086).
Fixes: b328d8e9bc ("dlist: use an union instead of allocating a 1-sized array")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11978>
When multiview is enabled, queries must begin and end in the
same subpass and N consecutive queries are implicitly used,
where N is the number of views enabled in the subpass.
Implementations decide how results are split across queries.
In our case, only one query is really used, but we still need
to flag all N queries as available by the time we flag the one
we use so that the application doesn't receive unexpected errors
when trying to retrieve values from them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
When multiview is enabled, we no longer care about when a particular
attachment is first or last used in a render pass, since not all views
in the attachment will meet that criteria. Instead, we need to track
each individual view (layer) in each attachment and emit our stores,
loads and clears accordingly.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
The Vulkan spec states that when multiview is enabled the number of
layers in the framebuffer is set to one and that each attachment
must then have at least as many layers as referenced by view masks
in the subpasses in which is used.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
We implement multiview by replicating draw commands for all enabled
views and setting a command buffer state for the currently active
view we are broadcasting to.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
Some floating atomic instructions are not available on GFX8-9.
No LLVM support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12060>
v1. Hyunjun Ko <zzoon@igalia.com>
- Add to hanlde VK_DESCRIPTOR_POOL_CREATE_HOST_ONLY_BIT_VALVE
- Don't support VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT and
VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
v2. Hyunjun Ko <zzoon@igalia.com>
- Fix some indentations and nitpicks.
- Add the extension to features.txt
v3. Hyunjun Ko <zzoon@igalia.com>
- Remove unnecessary asserts.
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9322>
When a dedicated allocation is not required, ignore it and suballocate.
Fixes dEQP-VK.api.invariance.random.
Cc: 21.2 mesa-stable
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12072>
When the dot product uses a source which can be optimized to a scalar,
after a bunch of nir optimization steps the source to fsum will be a scalar
with a x replicate swizzle. Hence nir_src_num_components is just 1 and the
fsum was just a no-op which is not correct. Arguably this could be optimized
a bit better, but just determine the number of addends by using nir_op_infos
instead (the operand fetch was fixed already by 39a938ecf4 doing the same).
Fixes: 4eb0475b5a ("gallivm/nir: add fsum support")
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12066>
non-timeline drivers have no screen-based method of "checking" batch
completion, so the context method has to be used here to avoid an infinite
loop
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12008>
I don't know why I was dropping this, but doing so breaks drivers that have
optimization passes based on the lengths of these variables
Fixes: c1cdf30a11 ("zink: apply Delete All The Code methodology to the ubo/ssbo variables")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12070>
Allows for each layer in a Scalable Video Coding (SVC) video to have its
own rate control setting, when encoding H.264.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11850>
