The latter can contain stale generated file, which, as-is, we'll end up
using.
Fixes: bfd17c76c1 "i965: Port INTEL_PRECISE_TRIG=1 to NIR."
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 4622c75dfb)
Analogous to previous commit.
Fixes: 4610e5ef28 "freedreno/ir3: fix sin/cos"
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
(cherry picked from commit a922c82125)
Otherwise we might end up w/o the respective folder (depending on
autotools version) and fail at build time.
Fixes: bfd17c76c1 "i965: Port INTEL_PRECISE_TRIG=1 to NIR."
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 5eed48d237)
Clipper::ClipScalar() is dead code and should be removed. It is causing
an error with gcc-7 because it references a now defunct member.
v2: includes bugzilla reference, same code change
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99633
CC: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
(cherry picked from commit bf29495dcd)
This fixes
GL45-CTS.tessellation_shader.tessellation_shader_tessellation.max_in_out_attributes
on nouveau. We only support 30 patch varyings (as 2 vec4 slots end up
being used for tess level settings), but were getting 32 exposed.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7d3f9ed71c)
The VBO module keeps track of any vbo buffers. It updates this list when
receiving an InvalidateState call, however this never happens when
recording draws right now. Make sure that we do all the usual state
updates when recording draws so that the VBO list may be kept up to
date.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99631
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e73f87fcbd)
It is not clear from the docs exactly how pipelined STATE_BASE_ADDRESS
actually is. We know from experimentation that we need to flush the
render cache prior to emitting STATE_BASE_ADDRESS and invalidate the
texture cache afterwards. The only thing the PRM says is that, on gen8+
we're supposed to invalidate the state cache after STATE_BASE_ADDRESS
but experimentation has indicated that doing so does nothing whatsoever.
Since we don't really know, let's do just a bit more flushing in the
hopes that this won't be a problem again. In particular:
1) Do a CS stall before we emit STATE_BASE_ADDRESS since we don't
really know whether or not it's pipelined.
2) Do a data cache flush in case what runs before STATE_BASE_ADDRESS
is a compute shader.
3) Invalidate the state and constant caches after STATE_BASE_ADDRESS
because the state may be getting cached there (we don't really know).
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 92128590bc)
We had no good reason for *not* doing this on gen7 before but we didn't
know it was needed. Recently, when trying update to Vulkan CTS version
1.0.2 in our CI system, Mark discovered GPU hangs on Haswell that appear
to be STATE_BASE_ADDRESS related. This commit fixes them.
Reported-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f1f9794118)
This causes hangs on Broadwell if you try to render to it. I have no
idea how we managed to not hit this earlier.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4871930451)
Commit 7b5878ee04 increased number of
outputs to 64, but left output array intact. This caused stack overflow
when number of outputs is bigger then 32. Found by ASAN.
Cc: "12.0 13.0 17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit a41f2527ae)
Applications may delete a shader program, create a new one, and bind it
before the next draw. With terrible luck, malloc may randomly return a
chunk of memory for the new gl_program that happened to be the exact
same pointer as our previously bound gl_program. In this case, our
logic to detect new programs in brw_upload_pipeline_state() would break:
if (brw->vertex_program != ctx->VertexProgram._Current) {
brw->vertex_program = ctx->VertexProgram._Current;
brw->ctx.NewDriverState |= BRW_NEW_VERTEX_PROGRAM;
}
Because the pointer is the same, we'd think it was the same program.
But it could be wildly different - a different stage altogether,
different sets of resources, and so on. This causes utter chaos.
As unlikely as this seems, I believe I hit this when running a subset
of the CTS in a loop, in a group of tests that churns through simple
programs, deleting and rebuilding them. Presumably malloc uses a
bucketing cache of sorts, and so freeing up a gl_program and allocating
a new one fairly quickly causes it to reuse that memory.
The result was that brw->vertex_program->info.num_ssbos claimed the
program had SSBOs, while brw->vs.base.prog_data.binding_table claimed
that there were none. This was crazy, because the binding table is
calculated from info.num_ssbos - the shader info appeared to change
between shader compile time and draw time. Careful use of watchpoints
revealed that it was being clobbered by rzalloc's memset when building
an entirely different program...
Fortunately, our 0xd0d0d0d0 canary for unused binding table entries
caused us to crash out of bounds when trying to upload SSBOs, or we
may have never discovered this heisenbug.
Fixes crashes in GL45-CTS.compute_shader.sso-case2 when using a hacked
cts-runner that only runs GL45-CTS.compute_shader.s* in EGL config ID 5
at 64x64 in a loop with 100 iterations.
Cc: "17.0 13.0 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 7c5629a269)
Analogous to what we do for the dri and gallium drivers.
Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@colllabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit cb6be5c8c0)
The size of the pool is slightly smaller than the size of the
structure containing the whole pool. We need to take that into account
on when setting up the internals.
Fixes a crash due to out of bound memory access in:
dEQP-VK.api.descriptor_pool.out_of_pool_memory
v2: Drop debug traces (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c3421106ec)
The spec section 5.2 says:
"vkAllocateCommandBuffers can be used to create multiple command
buffers. If the creation of any of those command buffers fails, the
implementation must destroy all successfully created command buffer
objects from this command, set all entries of the pCommandBuffers
array to VK_NULL_HANDLE and return the error."
Fixes:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_primary
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_secondary
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 25e21cb8d0)
In brw_blorp_copyteximage, we use the format from the render buffer.
This could be a combined depth/stencil format. In this case, we handle
stencil properly but we give blorp the wrong ISL format. Specifically,
we would give blorp ISL_FORMAT_R32G32B32A32_FLOAT which is the wrong
size was causing GPU hangs.
Fixes: GL45-CTS.gtf30.GL3Tests.packed_depth_stencil.packed_depth_stencil_copyteximage
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4c180f9633)
Some CIK-VI docs say this is the default behavior on SI. That doesn't
answer whether it's also the default behavior on CIK-VI.
Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 573bf0940a)
The previous code always compared integers as 64-bit. Due to variations
in sign-extension in the code generated by nir_opt_algebraic.py, this
meant that nir_search doesn't always do what you want. Instead, 32-bit
values should be matched as 32-bit and 64-bit values should be matched
as 64-bit. While we're here we unify the unsigned and signed paths.
Now that we're using the right bit size, they should be the same since
the only difference we had before was sign extension.
This gets the UE4 bitfield_extract optimization working again. It had
stopped working due to the constant 0xff00ff00 getting sign-extended
when it shouldn't have.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bb96b03461)
Blorp can deal with depth/stencil surfaces blits/copies without the
render target requirement. Also having both render target and
depth/stencil requirement is incompatible from isl's point of view.
This fixes an image creation issue in the high level quality settings
of the Unity3D player, which requires a depth texture with src/dst
transfer & 4x multisampling.
v2: Simply aspect checking condition (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 74c23bde5b)
A nomination unadorned with a specific version is now interpreted as
being aimed at the 17.0 branch, which was recently opened.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
If begin_frame is called before setting intra_matrix and
non_intra_matrix it leads to segmentation faults when
vl_mpeg12_decoder.c is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92634
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 4b0e9babc6)
Squashed with commit:
st/va: make sure that we call begin_frame() only once v2
This fixes "st/va: delay calling begin_frame until we have all parameters".
v2: call begin frame after decoder (re)creation as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
(cherry picked from commit 1338d912f5)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/gallium/state_trackers/va/va_private.h
Make sure unused ops and their references are removed, prior to entering
the GCM (global code motion) pass, to stop GCM from breaking the loop
logic and thus hanging the GPU.
Turns out, that sb has problems with loops and node optimizations
regarding associative folding:
- the global code motion (gcm) pass moves ops up a loop level/basic block
until they've fulfilled their total usage count
- if there are ops folded into others, the usage count won't be
fulfilled and thus the op moved way up to the top
- within GCM the op would be visited and their deps would be moved
alongside it, to fulfill the src constaints
- in a loop, an unused op is moved out of the loop and GCM would move
the src value ops up as well
- now here arises the problem: if the loop counter is one of the src
values it would get moved up as well, the loop break condition would
never get hit and the shader turn into an endless loop, resulting in the
GPU hanging and being reset
A reduced (albeit nonsense) piglit example would be:
[require]
GLSL >= 1.20
[fragment shader]
uniform int SIZE;
uniform vec4 lights[512];
void main()
{
float x = 0;
for(int i = 0; i < SIZE; i++)
x += lights[2*i+1].x;
}
[test]
uniform int SIZE 1
draw rect -1 -1 2 2
Which gets optimized to:
===== SHADER #12 OPT ================================== PS/BARTS/EVERGREEN =====
===== 42 dw ===== 1 gprs ===== 2 stack =========================================
ALU 3 @24
1 y: MOV R0.y, 0
t: MULLO_UINT R0.w, [0x00000002 2.8026e-45].x, R0.z
LOOP_START_DX10 @22
PUSH @6
ALU 1 @30 KC0[CB0:0-15]
2 M x: PRED_SETGE_INT __.x, R0.z, KC0[0].x
JUMP @14 POP:1
LOOP_BREAK @20
POP @14 POP:1
ALU 2 @32
3 x: ADD_INT R0.x, R0.w, [0x00000002 2.8026e-45].x
TEX 1 @36
VFETCH R0.x___, R0.x, RID:0 MFC:16 UCF:0 FMT[..]
ALU 1 @40
4 y: ADD R0.y, R0.y, R0.x
LOOP_END @4
EXPORT_DONE PIXEL 0 R0.____ EOP
===== SHADER_END ===============================================================
Notice R0.z being the loop counter/break condition relevant register
and being never incremented at all. Also some of the loop content
has been moved out of it, to fulfill the requirements for the one unused
op.
With a debug build of mesa this would produce an error like
error at : PRED_SETGE_INT __, __, EM.2, R1.x.2||FP@R0.z, C0.x
: operand value R1.x.2||FP@R0.z was not previously written to its gpr
and the compilation would fail due to this. On a release build it gets
passed to the GPU.
When using this patch, the loop remains intact:
===== SHADER #12 OPT ================================== PS/BARTS/EVERGREEN =====
===== 48 dw ===== 1 gprs ===== 2 stack =========================================
ALU 2 @24
1 y: MOV R0.y, 0
z: MOV R0.z, 0
LOOP_START_DX10 @22
PUSH @6
ALU 1 @28 KC0[CB0:0-15]
2 M x: PRED_SETGE_INT __.x, R0.z, KC0[0].x
JUMP @14 POP:1
LOOP_BREAK @20
POP @14 POP:1
ALU 4 @30
3 t: MULLO_UINT T0.x, [0x00000002 2.8026e-45].x, R0.z
4 x: ADD_INT R0.x, T0.x, [0x00000002 2.8026e-45].x
TEX 1 @40
VFETCH R0.x___, R0.x, RID:0 MFC:16 UCF:0 FMT[..]
ALU 2 @44
5 y: ADD R0.y, R0.y, R0.x
z: ADD_INT R0.z, R0.z, 1
LOOP_END @4
EXPORT_DONE PIXEL 0 R0.____ EOP
===== SHADER_END ===============================================================
Piglit: ./piglit summary console -d results/*_gpu_noglx
name: unpatched_gpu_noglx patched_gpu_noglx
---- ------------------- -----------------
pass: 18016 18021
fail: 748 743
crash: 7 7
skip: 1124 1124
timeout: 0 0
warn: 13 13
incomplete: 0 0
dmesg-warn: 0 0
dmesg-fail: 0 0
changes: 0 5
fixes: 0 5
regressions: 0 0
total: 19908 19908
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94900
Tested-by: Heiko Przybyl <lil_tux@web.de>
Tested-on: Barts PRO HD6850
Signed-off-by: Heiko Przybyl <lil_tux@web.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e933246013)
Nominated-by: Andreas Boll <andreas.boll.dev@gmail.com>
Fixes a number of transform feedback tests when run with Linux 4.8,
which allows us to use the MI_LOAD_REGISTER_REG command, at which point
we started using this new broken path.
ES3-CTS.functional.transform_feedback.array_element.interleaved.lines.*
and Piglit's arb_transform_feedback2/draw-auto are both fixed by this
patch, for example.
Thanks to Chris Wilson for catching this mistake!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99030
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 2138347a45)
In situations where libdrm_amdgpu and mesa are installed to the same
location, the mesa installed headers will take precedence over the git
source headers.
This is due to the AMDGPU_CFLAGS containing the install directory.
This situation can cause build errors if the git version of a header is
newer than the currently installed version of a header (e.g. git pull
updates vulkan.h)
Note: using the same install prefix for mesa and libdrm is probably a
common occurrence since it is described in the radeonBuildHowTo wiki:
https://www.x.org/wiki/radeonBuildHowTo/
v2: added sign-off
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit a3ad6a34c6)
Nominated-by: Emil Velikov <emil.velikov@collabora.com>
The current message sounds like a small warning, clarify that it can
result in lack of presentation support and application crashes.
v2: add "if they do" (Bas)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98263
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Jason ekstrand <jason@jlekstrand.net>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e0674e740b)
Nominated-by: Emil Velikov <emil.velikov@collabora.com>
Prep-work for next patch, mostly move to tracking last_fence as a
pipe_fence_handle (created now only in fd_gmem_render_tiles()), and a
bit of superficial renaming.
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 16f6ceaca9)
Fixes a glxgears issues.
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Nominated-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
We were using ir_var_auto for the inlined function parameter variables,
which is wrong, as it suggests that those are real variables declared
by the program.
Normally this doesn't matter. However, if you called built-ins at
global scope, it would pollute the global variable namespace with
these new parameter temporaries. If the shader already had variables
with those names, the linker might see contradictory global variable
declarations and raise an error.
Making them temporaries indicates that these are just things generated
by the compiler internally. This avoids confusing the linker.
Fixes a new Piglit test: glsl-fs-multiple-builtins.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99154
Reported-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 62b8bcda1c)
Fixes: e99b9395be "gallium/hud: Add support for CPU frequency monitoring"
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 383fc8e9f3)
This commit makes si_update_poly_offset set poly_offset to NULL if
uses_poly_offset is false. This way poly_offset either points into the
currently queued rasterizer, or it is NULL.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99451
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit d7d32b3bfe)
As described in commit 690ead4a13 ("egl/wayland-egl: Fix for segfault
in dri2_wl_destroy_surface.") if we attempt to destroy a EGL surface
attached to already destroyed Wayland window we'll get a segfault.
v2: set the correct callback alongside the window->private. (Dan)
Cc: Daniel Stone <daniels@collabora.com>
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit bfd6314350)
This may fix GPU hangs on Gen8. I don't know if it does though.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 7a2b65a1d7)
Port of 1e41d7f7b0:
"anv: Support loader interface version 3 (patch v2)"
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 6d2fb04f09)
The commit resolves the issue by using new Wayland API thus bumping the
Wayland build requirement from 1.2 to 1.11. Allowing requirement changes
[for stable] is a rare exception and in this case we jump over 3 years
worth, which is not cool.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
When failing to initializing the Wayland EGL driver, don't leak the
display server connection if it was us who created it.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 361796651c)
