Emitting the instructions one by one results in two MOV instructions
that won't be propagated. By handling both instructions at once, a
single MOV is emitted. For example, on Ice Lake this helps
dEQP-VK.spirv_assembly.type.vec3.i8.bitwise_xor_frag:
SIMD8 shader: 49 instructions. 1 loops. 4044 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 41 instructions. 1 loops. 3804 cycles. 0:0 spills:fills, 5 sends
Without "intel/fs: Allow copy propagation between MOVs of mixed sizes,"
the improvement is still 8 instructions, but there are more instructions
to begin with:
SIMD8 shader: 52 instructions. 1 loops. 4164 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 44 instructions. 1 loops. 3944 cycles. 0:0 spills:fills, 5 sends
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
In the vec4 compiler, 8-bit types should never exist.
In the scalar compiler, 8-bit types should only ever be able to exist on
Gfx ver 8 and 9.
Some instructions are handled in non-obvious ways.
Hopefully this will save the next person some time.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
This fixes a hang in the following piglit test when GCM moves a
UBO load outside of the loop.
tests/shaders/ssa/fs-if-def-else-break.shader_test
The end NIR ends up looking like this:
vec2 32 ssa_3 = intrinsic load_ubo (ssa_2, ssa_0) (0, 1073741824, 0, 0, 8)
vec1 32 ssa_4 = mov ssa_3.x
vec1 32 ssa_5 = inot ssa_3.y
/* succs: block_1 */
loop {
...
if ssa_5 { }
}
Fixes: 1edf67fc3f ("intel/fs: Generate if instructions with inverted conditions")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12064>
It's intel-specific, used to get at MSAA compression information.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11775>
Be consistent with other usages in Vulkan and SPIR-V, and the recently
added workgroup_size field.
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11190>
One exception is src/amd/addrlib/, for which -Wimplicit-fallthrough is
explicitly disabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
When a surface of type SURFTYPE_NULL is accessed by resinfo, the MIPCount
returned is undefined instead of 0.
Closes#4309
Fixes dEQP-VK.robustness.robustness2.*.sampled_image.*.null_descriptor.*
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10147>
The messages for those 16-bit operations still use 32-bit sources and
destinations, so expand them accordingly when building the payload.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8750>
This allows us to do bounds checked A64 block load without the it being
counted as control-flow by NIR. This means that NIR optimizations like
CSE will be able to work on these the same as a regular load.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8635>
We currently don't use push constants with the COMPUTE_WALKER command.
Make all uniforms to be pull constants.
The local group id previously was a push constant, but is now
available in R0.2[7:0].
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8342>
Instead of making it a fragment-specific thing based on uses_kill, track
whether or not we need one in fs_visitor and emit HALT_TARGET at the end
of emit_nir_code() if needed.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5071>
We're about to start using it to implement nir_jump_halt which has
nothing inherently to do with fragment shaders or discards. May as well
name it for the HW instruction it generates.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5071>
The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
In our source languages, interpolateAtOffset() takes a floating point
offset in the range [-0.5, +0.5]. However, the hardware takes integer
valued offsets in the range [-8, 7], in units of 1/16th of a pixel.
So, we need to multiply and clamp the coordinates. We were doing this
in the FS backend, but with the advent of IBC, I'd like to avoid doing
it twice. This patch instead moves the lowering to NIR so we can reuse
it across both backends.
v2: Use nir_shader_instructions_pass (suggested by Eric Anholt).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6193>
Intel hardware supports 8-bit arithmetic but it's tricky and annoying:
- Byte operations don't actually execute with a byte type. The
execution type for byte operations is actually word. (I don't know
if this has implications for the HW implementation. Probably?)
- Destinations are required to be strided out to at least the
execution type size. This means that B-type operations always have
a stride of at least 2. This means wreaks havoc on the back-end in
multiple ways.
- Thanks to the strided destination, we don't actually save register
space by storing things in bytes. We could, in theory, interleave
two byte values into a single 2B-strided register but that's both a
pain for RA and would lead to piles of false dependencies pre-Gen12
and on Gen12+, we'd need some significant improvements to the SWSB
pass.
- Also thanks to the strided destination, all byte writes are treated
as partial writes by the back-end and we don't know how to copy-prop
them.
- On Gen11, they added a new hardware restriction that byte types
aren't allowed in the 2nd and 3rd sources of instructions. This
means that we have to emit B->W conversions all over to resolve
things. If we emit said conversions in NIR, instead, there's a
chance NIR can get rid of some of them for us.
We can get rid of a lot of this pain by just asking NIR to get rid of
8-bit arithmetic for us. It may lead to a few more conversions in some
cases but having back-end copy-prop actually work is probably a bigger
bonus. There is still a bit we have to handle in the back-end. In
particular, basic MOVs and conversions because 8-bit load/store ops
still require 8-bit types.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7482>
We can't really support these directly on any platform. May as well let
NIR lower them. The NIR lowering is potentially one more instruction
for scan/reduce ops thanks to not being able to do the B->W conversion
as part of SEL_EXEC. For imax/imin exclusive scan, it's yet another
instruction thanks to the extra imax/imin NIR has to insert to deal with
the fact that the first live channel will contain the identity value
which, when signed, will cast wrong. However, it does let us drop some
complexity from our back-end so it's probably worth it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7482>
For terminate operation, jump the invocation without predicating on
the rest of the quad being disabled -- which is what is done for
demote and discard.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7150>
Add an option to nir_lower_gs_intrinsics which tells it to track
the number of emitted primitives, not just vertices. Additionally,
also make it per-stream.
Also rename the set_vertex_count intrinsic to
set_vertex_and_primitive_count.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6964>
Scratch stores are being lowered to the instructions with side-effects,
however they should be enabled in fs helper invocations, since they
are produced from operations which don't imply side-effects.
To fix this - we move the decision of whether the sample mask predication
is enable to the point where logical brw instructions are created.
GLSL example of the issue:
int tmp[1024];
...
do {
// changes to tmp
} while (some_condition(tmp))
If `tmp` is lowered to scrach memory, `some_condition` would be
undefined if scratch write is predicated on sample mask, making
possible for the while loop to become infinite and hang the GPU.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3256
Fixes: 53bfcdeecf
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6056>
This makes it explicit that this intrinsic is only for SSBOs. For the
v3dv driver, we'll be adding a get_ubo_size intrinsic and we want to be
able to distinguish between the two.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6812>
Coverity complains about possible out-of-bounds write & read, because
it thinks that "loc + i" can be bigger than sizes of the 2 used arrays.
It's not obvious from the code it cannot happen, so add asserts here.
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6667>
