Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Just a nice hint for both peoples and compilers.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Ported from radeonsi. Improves windowed glxgears ran as
vblank_mode=0 glxgears -info -geometry 0+0+512+512
from ≈2270 FPS to ≈2360 FPS. Tested with AMD TURKS.
v2: turned out glxgears ignores the option above, the correct way would
be "512x512+0+0". Now it can be seen 512x512 actually loses 30 FPS.
300×300 however wins around a hundred FPS, and to leave some room in
case results may differ for other cards I want not to nitpick in search
of an optimum but to simply leave 300×300 in the code.
v3: remove redundant braces, and try harder for the mail to stick to
the rest of the series.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Annoyingly we still have to briefly drop the lock to unref resources..
but push the lock down into __fd_batch_destroy() so we can invalidate
the batch and reset resources before dropping the lock.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Re-allocate rather than re-use. Originally we had an unnecessarily
complex design to avoid re-allocating cmdstream buffers. But now that
support for "growable" cmdstream buffers has been in place for a couple
years, I guess we can care a bit less about the extra overhead on older
kernels.
But making the batches one-shot removes a class of potential race
conditions vs the flush_queue.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of the reading batch setting a dependency on the writing batch,
simply flush the writing batch immediately. This avoids situations
where we have to flush the context's current batch later.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This was basically to avoid a zero-dword IB (indirect-branch), but
instead just don't emit the IB packet in that case.
Signed-off-by: Rob Clark <robdclark@gmail.com>
pipe_framebuffer_state can have samples=0 in various cases, which is
actually the same thing as samples=1. So use the _get_num_samples()
helper to populate the key, to avoid this looking like two distinct
fb states to the cache.
Signed-off-by: Rob Clark <robdclark@gmail.com>
It is possible for a batch to be freed under our feet when flushing, so
it is best to hold a reference to all of them up-front.
Signed-off-by: Rob Clark <robdclark@gmail.com>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
If we know that the given image doesn't have any metadata,
we don't need to flush.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Vulkan 1.1.80 spec says:
"viewMask has the same effect for the described subpass as
VkRenderPassMultiviewCreateInfo::pViewMasks has on each
corresponding subpass."
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code is buggy: if there are only 12 dwords left in cbuf,
we emit a zero data length command which will be rejected by virglrenderer.
Fix it by calling flush in this case.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
This allows us to implement glMinSampleShading correctly, which up
until now just got ignored.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When handling loops in constant propagation, implement the "FINISHME"
comment like copy propagation: perform a first pass to find values
that can't be propagated, then perform a second pass with the ACP
containing still valid values.
Certain values are killed because the loop may run more than one
iteration, so we can't copy propagate them as they would be invalid in
the later iterations.
Reviewed-by: Eric Anholt <eric@anholt.net>
When handling 'if' in constant propagation, if a certain variable was
killed when processing the first branch of the 'if', then the second
would get any propagation from previous nodes. This is similar to the
change done for copy propagation code.
x = 1;
if (...) {
z = x; // This would turn into z = 1.
x = 22; // x gets killed.
} else {
w = x; // This would NOT turn into w = 1.
}
With the change, we let constant propagation happen independently in
the two branches and only then apply the killed values for the
subsequent code.
The new code use a single hash table for keeping the kills of both
branches (the branches only write to it), and it gets deleted after we
use -- instead of waiting for mem_ctx to collect it.
NIR deals well with constant propagation, so it already covered for
the missing ones that this patch fixes.
Reviewed-by: Eric Anholt <eric@anholt.net>
total instructions in shared programs: 98578 -> 98119 (-0.47%)
instructions in affected programs: 27571 -> 27112 (-1.66%)
and it also eliminates most spills/fills on the CTS's randomized uniform
usage testcases.
SNB doesn't have a definition of 3DSTATE_CONSTANT_BODY, thats
why we got segmentation fault when used INTEL_DEBUG=bat.
Fixed by adding of 3DSTATE_CONSTANT_BODY into 3DSTATE_CONSTANT
of VS, GS and PS structures.
v2: added definition of 3DSTATE_CONSTANT_BODY to the gen6.xml
Fixes: 169d8e011a (intel: Fix 3DSTATE_CONSTANT buffer decoding.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107190
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes the arguments match the (thing, container) pattern used in
other nir_foreach macros and also renames it to make that a bit more
clear.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
For one thing, the NIR opcodes for image load/store always take and
return a vec4 value regardless of the image type. We need to fix up
both the source and destination to handle it. For another thing, we
weren't actually setting up a destination in the OpAtomicLoad case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: mesa-stable@lists.freedesktop.org
Converting from a switch statement that would not allow intermediate sample counts
to use an if-else chain went a bit wrong, so that in some cases the range that
should be inclusive was exclusive and the line for 16 samples was copies wrongly.
v2: elaborate commit message.
Fixes: 91f48cdfe5
virgl: Add support for glGetMultisample
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com> (v1)
fixes a couple of packed_pixel CTS tests. No regressions inside a CTS run.
v2: simplify the changes a bit
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This fixes a nasty hang in Batman: Arkham City which apparently calls
vkCmdClearColorImage on a linear RGB image.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
In this case, the surface faking will give us a R8_UNORM surface and we
need to do an sRGB conversion in the shader. Found by inspection.
cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
