So far we were packing by hand unnormalized coordinates at the
V3D41_TMU_CONFIG_PARAMETER_1 pack structure. To get this working we
hardcoded V3D_VERSION to 41 at v3dv_uniforms, that works for v71
because the structure are the same. But that is somewhat ugly, and
will not work if a new hw generation have a different structure.
Additionally, we found that for v3d this will be also needed.
So this commit adds a helper on the compiler. For now, and to simplify
it also use just one method for both generations. This solves the
problem of the same code needed on both v3d and v3dv.
But the idea is that in the future we need a similar need, but the
structure different on each generation, it would have used a similar
approach to other generation dependent function calls (like
v3d40_vir_emit_tex), having the implementation on a source file that
can safely include the hw generation headers.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25544>
Currently the run takes ~ 35 minutes, which is too much.
Reported-by: default avatarDaniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
Most likely was historically used there, but not recently.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
This is leftovers from the compilation/installation phase.
In the build containers this took around ~ 400 MB.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
MinGW is currently disabled and new implementation will handle things
differently anyway.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
This was originally split due testing both rusticl and clover.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
Let's hope we don't see Clover in next release.
For rusticl, drop debian-rusticl and keep the debian-rusticl-testing.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
So far we show installation part together with meson tests.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
Currently is run around 20 minutes.
Except this, also use Weston (more likely use for zink+a618)
as an effort to stop testing X11 bugs instead of Mesa.
Rest will get covered by nightly job.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25843>
We use SHADER_OPCODE_SEND directly instead of FS_OPCODE_FB_WRITE (for a
while now) and FS_OPCODE_REP_FB_WRITE (since the previous commit).
Assert that it isn't used on Gfx7+.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
Sandybridge uses this code and needs MRFs, but all other platforms send
from GRFs. Do that directly rather than relying on the MRF hack.
Ivybridge and later also use SHADER_OPCODE_SEND directly rather than
a virtual opcode that's handled in the generator, so we follow suit.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
We never set key->clamp_fragment_color when compiling the BLORP fast
clear shaders. Besides, we were setting saturate on an FB write opcode,
which...isn't even a thing. We would need it on the MOV, and weren't
setting it there. So it wouldn't have even worked.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
This is basically just once through the loop but copy and pasted. One
difference is that the single render target case used a headerless
message, and the multiple render target case always used headers.
Now we use headerless messages for the first render target, even in the
multiple render target case. While we already have it set up for the
other RTs, it's still 2 fewer registers to send. Minor improvement.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
A long time ago, we used a uniform for the clear color. Back in 2014,
we added support for using a flat input instead, as this was easier for
Vulkan, but we left the option of using a uniform for OpenGL.
Eventually nobody used the uniform approach anymore, but the compiler
code to handle it remained. Drop the dead code.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
This code is compiled out, but has been left in place in case we wanted
to use it for debugging something. In the olden days, we'd use it for
platform enabling. I can't think of the last time we did that, though.
I also used to use it for debugging. If something was misrendering, I'd
iterate through shaders 0..N, replacing them with "draw hot pink" until
whatever shader was drawing the bad stuff was brightly illuminated.
Once it was identified, I'd start investigating that shader.
These days, we have frameretrace and renderdoc which are like, actual
tools that let you highlight draws and replace shaders. So we don't
need to resort iterative driver hacks anymore. Again, I can't think of
the last time I actually did that.
So, this code is basically just dead. And it's using legacy MRF paths,
which we could update...or we could just delete it.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20172>
All commands that make queries available have feedback cmds batched
and stored during recording. At submission time, for each batch
(SubmitInfo) these feedback cmds are recorded in a cmd buffer that is
appended after the last original cmd buffer (but before
semaphore/fence feedback).
Query reset cmds are deferred as well and also remove any prior feedback
cmds for queries its resetting within the batch.
Cc: 23.3 <mesa-stable>
Signed-off-by: Juston Li <justonli@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25413>
Link the query feedback cmd lifecycle to a cmd in the batch so that when
that last cmd gets reset/freed, we assert its safe to reset the query
feedback cmd. The cmd is then placed on the free list for reuse.
Some edge cases if the the last cmd is simultaneous or gets resubmitted.
Cc: 23.3 <mesa-stable>
Signed-off-by: Juston Li <justonli@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25413>
Add function to alloc a cmd buffer and record all the deferred query
feedback cmds into it at submission time.
Cc: 23.3 <mesa-stable>
Signed-off-by: Juston Li <justonli@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25413>
defered query feedback cmds have similaries with timeline semaphore
feedback so refactor out some common functions for reuse
Cc: 23.3 <mesa-stable>
Signed-off-by: Juston Li <justonli@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25413>
These are not real rules, they are just strings that have an anchor that
can be referenced elsewhere in this file.
Having these fake bits in here is confusing, as revealed by the
reactions from the first version of this commit.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25920>
In case we run out of space, all the parts of the driver that rely on
this should deal with failure. The helpers will set the batch in error
state so that it cannot be submitted by the application.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25955>
Some of the names are a bit confusing. The main change is to introduce
the "indirect_" prefix.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25955>
The embedding driver could be failing the allocation for whatever
reason, in which case we should skip the surface state writes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25955>
It may be some MTL specific code paths, but 7cdacaf493 is triggering
anvil to run out of space when initializing the render batch.
Fixes: 7cdacaf493 ("intel/xehp: Adjust TBIMR performance chicken bits.")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25949>
