As the alignment requirements can be 32 KiB or more, also adding
an aligned buffer creation function.
DCC is disabled for textures that can be shared as sharing the
DCC buffers has not been implemented yet.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Out of 7063 shaders from my shader-db:
- 6564 (93%) shaders don't have any state parameters.
- 347 (5%) shaders have 1 state parameter for WPOS lowering.
- The remaining 2% have more state parameters, usually matrices.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Cc: mesa-stable@lists.freedesktop.org
v2 (agd): rebase on mesa master, split pci ids to
separate commit
v3 (agd): use carrizo for llvm processor name for
llvm 3.7 and older
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Cc: mesa-stable@lists.freedesktop.org
The edgeflag comes in as ubyte with glEdgeFlagPointer but as float with
plain immediate glEdgeFlag. Avoid reading bytes that weren't meant for
the edgeflag in the pointer case.
Fixes intermittent failures with gl-2.0-edgeflag piglit (and valgrind
complaints about reading uninitialized memory).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
We can't do this all the time, because you want blending to be done in
linear space, and sRGB would lose too much precision being done in 4x8.
The win on instructions is pretty huge when you can, though.
total uniforms in shared programs: 32065 -> 32168 (0.32%)
uniforms in affected programs: 327 -> 430 (31.50%)
total instructions in shared programs: 92644 -> 89830 (-3.04%)
instructions in affected programs: 15580 -> 12766 (-18.06%)
Improves openarena performance at 1920x1080 from 10.7fps to 11.2fps.
This corresponds to instructions used on vc4 for its blending inside of
shaders. I've seen these opcodes on other architectures before, but I
think it's the first time these are needed in Mesa.
v2: Rename to 'u' instead of 'i', since they're all 'u'norm (from review
by jekstrand)
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Write groups of enabled components together.
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Now that we don't read each component one-by-one, we don't need the
temoprary vgrf for the offset. More importantly, this register was type
UD while the nir source was type D. This broke copy propagation and left
a redundant MOV in the generated code.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
The scalar destination registers break copy propagation. Instead compute
the results to a regular register and then reference a component when we
later use the result as a source.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
The emit_untyped_read and emit_untyped_write helpers already uniformize
the surface index argument. No need to do it before calling them.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
The destination for SHADER_OPCODE_FIND_LIVE_CHANNEL is always a UD
register. When we replace the opcode with a MOV, make sure we use a UD
immediate 0 so copy propagation doesn't bail because of non-matching
types.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Instead of looping through single-component reads, read all components
in one go.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
We always set the mask to 0xffff, which is what it defaults to when no
header is present. Let's drop the header instead.
v2: Only remove header for untyped reads. Typed reads always need the
header.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Commit f17b78 added an alternative reads_flag(channel) that returned
if the instruction was reading a specific channel flag. By mistake it
only took into account the predicate, but when the opcode is
VS_OPCODE_UNPACK_FLAGS_SIMD4X2 there isn't any predicate, but the flag
are used.
That mistake caused some regressions on old hw. More information on
this bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92621
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a little bit like the mprotect-based fencing I've experimented
with, but it's simple and low overhead. The downside is that only catches
writes, not reads.
It didn't catch any bad writes on a current piglit run, but may be useful
in the future.
Move scratch_size out of ilo_state_shader_kernel_info and
ilo_state_compute_interface_info. A scratch space is shared by all
kernels/interfaces. Update builder to emit relocs for scratch bos.
Location has never been able to be a negative value because it has
always been validated in the parser.
Also the linker doesn't check for negatives like the comment claims.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
virgl/vtest is a swrast driver that allows the
virgl acceleration to be tested without having
a virtual machine.
The backend has a unix socket server that
this connects to.
This is run by setting
LIBGL_ALWAYS_SOFTWARE=y
GALLIUM_DRIVER=virpipe
In this mode all renderering is sent over
a socket to the remote renderer, and the
results are readback and copies to the screen
using drisw. This works well enough to develop
new features and to help debug.
Signed-off-by: Dave Airlie <airlied@redhat.com>
virgl is the 3D acceleration backend for the
virtio-gpu shipping with qemu.
The 3D acceleration is designed around gallium
and TGSI as the virtualisation layer. The backend
renderer translates the virgl interface into
OpenGL currently.
This is the initial import of the driver to mesa.
The kernel driver portions are lined up for drm-next.
Currently this driver supports up to GL3.3 and some
misc extensions if the host driver exposes it. It is
planned to iterate the virgl API to new GL levels
as mesa host drivers gain features.
v2: fix resource tracking across flushes to avoid
->bind hack in mapping.
consolidate mapping and waiting code for transfers.
use u_range for dirt tracking.
handle larger shaders in protocol.
include virtgpu_drm.h in mesa for now.
add translation layer for gallium tgsi to virgl tgsi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is used to detect error in virgl if we overflow the shader
dumping buffers.
v2: return a bool.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support to the parser to accept hex values as floats,
and then adds support to the dumper to allow the user to select
to dump float as 32-bit hex numbers.
This is required to get accurate values for virgl use of TGSI.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
