This will be used to identify buffer variables inside shader storage
buffer objects, which are very similar to uniforms except for a few
differences, most important of which is that they are writable.
Since buffer variables are so similar to uniforms, we will almost always
want them to go through the same paths as uniforms.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
gl_NumSamples should only be enabled when ARB_sample_shading is enabled.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
A number of builtin variables have checks based on the extension being
enabled, but were missing enablement via a higher GLSL version.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
v2: Change GL version from 400 to 420. Noticed by Tapani and Ilia.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
It seems to have been forgotten during viewports array implementation time.
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Also move num_state_slots inside ir_variable_data for better packing.
The payoff for this will come in a few more patches.
No change Valgrind massif results for a trimmed apitrace of dota2.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The payoff for this will come in the next patch.
No change Valgrind massif results for a trimmed apitrace of dota2.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
v2: Rename GLSL_MATRIX_LAYOUT_DEFAULT to GLSL_MATRIX_LAYOUT_INHERITED.
Add comments in glsl_types.h explaining the layouts. Suggested by Matt.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
With MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader, this fixes piglit:
built-in-constants tests/spec/arb_compute_shader/minimum-maximums.txt
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
As far as I can tell, the Intel mesa driver is the only driver in the world
still supporting this legacy extension. If someone wants to do bump
mapping, they can use shaders.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> [v2]
Reviewed-by: Ian Romanick <idr@freedesktop.org> [v3]
Found with IWYU. Compile-tested on my Ivy-bridge system.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Thomas Helland <thomashelland90@gmail.com>
This allows them to be moved to .rodata, and allow us to be sure that they
will not be modified.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
v2:
* Make gl_InvocationID a system value
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
v2: Document that the 3-element array MaxComputeWorkGroupCount is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Document that the 3-element array MaxComputeWorkGroupSize is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch adds MESA_SHADER_COMPUTE to the gl_shader_stage enum.
Also, where it is trivial to do so, it adds a compute shader case to
switch statements that switch based on the type of shader. This
avoids "unhandled switch case" compiler warnings.
Reviewed-by: Matt Turner <mattst88@gmail.com>
These are replaced with
ctx->Const.Program[MESA_SHADER_{VERTEX,FRAGMENT,GEOMETRY}]. In
patches to follow, this will allow us to replace a lot of ad-hoc logic
with a variable index into the array.
With the exception of the changes to mtypes.h, this patch was
generated entirely by the command:
find src -type f '(' -iname '*.c' -o -iname '*.cpp' -o -iname '*.py' \
-o -iname '*.y' ')' -print0 | xargs -0 sed -i \
-e 's/Const\.VertexProgram/Const.Program[MESA_SHADER_VERTEX]/g' \
-e 's/Const\.GeometryProgram/Const.Program[MESA_SHADER_GEOMETRY]/g' \
-e 's/Const\.FragmentProgram/Const.Program[MESA_SHADER_FRAGMENT]/g'
Suggested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we had an enum called gl_shader_type which represented
pipeline stages in the order they occur in the pipeline
(i.e. MESA_SHADER_VERTEX=0, MESA_SHADER_GEOMETRY=1, etc), and several
inconsistently named functions for converting between it and other
representations:
- _mesa_shader_type_to_string: gl_shader_type -> string
- _mesa_shader_type_to_index: GLenum (GL_*_SHADER) -> gl_shader_type
- _mesa_program_target_to_index: GLenum (GL_*_PROGRAM) -> gl_shader_type
- _mesa_shader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string
This patch tries to clean things up so that we use more consistent
terminology: the enum is now called gl_shader_stage (to emphasize that
it is in the order of pipeline stages), and the conversion functions are:
- _mesa_shader_stage_to_string: gl_shader_stage -> string
- _mesa_shader_enum_to_shader_stage: GLenum (GL_*_SHADER) -> gl_shader_stage
- _mesa_program_enum_to_shader_stage: GLenum (GL_*_PROGRAM) -> gl_shader_stage
- _mesa_progshader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string
In addition, MESA_SHADER_TYPES has been renamed to MESA_SHADER_STAGES,
for consistency with the new name for the enum.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Also rename the "target" field of _mesa_glsl_parse_state and the
"target" parameter of _mesa_shader_stage_to_string to "stage".
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch moves following bitfields and variables to the data
structure:
explicit_location, explicit_index, explicit_binding, has_initializer,
is_unmatched_generic_inout, location_frac, from_named_ifc_block_nonarray,
from_named_ifc_block_array, depth_layout, location, index, binding,
max_array_access, atomic
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch moves following bitfields in to the data structure:
used, assigned, how_declared, mode, interpolation,
origin_upper_left, pixel_center_integer
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Data section helps serialization and cloning of a ir_variable. This
patch includes the helper bits used for read only ir_variables.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
From section 7.1 (Built-In Language Variables) of the GLSL 4.10
spec:
Also, if a built-in interface block is redeclared, no member of
the built-in declaration can be redeclared outside the block
redeclaration.
We have been regarding this text as a clarification to the behaviour
established for gl_PerVertex by GLSL 1.50, so we apply it regardless
of GLSL version.
This patch enforces the rule by adding an enum to ir_variable to track
how the variable was declared: implicitly, normally, or in an
interface block.
Fixes piglit tests:
- gs-redeclares-pervertex-out-after-global-redeclaration.geom
- vs-redeclares-pervertex-out-after-global-redeclaration.vert
- gs-redeclares-pervertex-out-after-other-global-redeclaration.geom
- vs-redeclares-pervertex-out-after-other-global-redeclaration.vert
- gs-redeclares-pervertex-out-before-global-redeclaration
- vs-redeclares-pervertex-out-before-global-redeclaration
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
v2: Don't set "how_declared" redundantly in builtin_variables.cpp.
Properly clone "how_declared".
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
New builtins added by GL_ARB_sample_shading:
in vec2 gl_SamplePosition
in int gl_SampleID
in int gl_NumSamples
out int gl_SampleMask[]
V2: - Use SWIZZLE_XXXX for STATE_NUM_SAMPLES.
- Use "result.samplemask" in arb_output_attrib_string.
- Add comment to explain the size of gl_SampleMask[] array.
- Make gl_SampleID and gl_SamplePosition system values.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Ever since the addition of interface blocks with instance names, we have
had an implicit invariant:
var->type->is_interface() ==
(var->type == var->interface_type)
The odd use of == here is intentional because !var->type->is_interface()
implies var->type != var->interface_type.
Further, if var->type->is_array() is true, we have a related implicit
invariant:
var->type->fields.array->is_interface() ==
(var->type->fields.array == var->interface_type)
However, the ir_variable constructor doesn't maintain either invariant.
That seems kind of silly... and I tripped over it while writing some
other code. This patch makes the constructor do the right thing, and it
introduces some tests to verify that behavior.
v2: Add general-ir-test to .gitignore. Update the description of the
ir_variable invariant for arrays in the commit message. Both suggested
by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch populates the following built-in GLSL 1.50 variables based
on constants stored in ctx->Const:
- gl_MaxVertexOutputComponents
- gl_MaxGeometryInputComponents
- gl_MaxGeometryOutputComponents
- gl_MaxFragmentInputComponents
- gl_MaxGeometryTextureImageUnits
- gl_MaxGeometryOutputVertices
- gl_MaxGeometryTotalOutputComponents
- gl_MaxGeometryUniformComponents
- gl_MaxGeometryVaryingComponents
On i965/gen7, fixes all Piglit tests in "spec/glsl-1.50/built-in
constants/*" except for gl_MaxCombinedTextureImageUnits and
gl_MaxGeometryUniformComponents.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Although these interfaces can't be accessed directly by GLSL (since
they don't have an instance name), they will be necessary in order to
allow redeclarations of gl_PerVertex.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently, we create just a single gl_PerVertex interface block for
geometry shader inputs. In later patches, we'll also need to create
an interface block for geometry and vertex shader outputs. Moving the
code into its own class will make reuse easier.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, we erroneously used the name "gl_in" for both the block
name and the instance name.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We use a location of -1 for variables which don't have their own
assigned locations--this includes ir_variables which represent named
interface blocks. Technically the location assigned to gl_in doesn't
matter, since gl_in is only accessed via its members (which have their
own locations). But it's nice to be consistent.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, builtin_variables.cpp was written assuming that we
supported ARB_geometry_shader4 style geometry shader inputs, meaning
that each built-in varying input to a geometry was supplied via an
array variable whose name ended in "In", e.g. gl_PositionIn or
gl_PointSizeIn.
However, in GLSL 1.50 style geometry shaders, things work
differently--built-in inputs are supplied to geometry shaders via a
built-in interface block called gl_in, which contains all the built-in
inputs using their usual names (e.g. the gl_Position input is supplied
to the geometry shader as gl_in[i].gl_Position).
This patch adds the necessary logic to builtin_variables.cpp to create
the gl_in interface block and populate it accordingly for geometry
shader inputs. The old ARB_geometry_shader4 style varyings are
removed, though they can easily be added back in the future if we
decide to support ARB_geometry_shader4.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Pull the data directly from the context like the other varying related
limits. The parser state shadow copies were added back when the parser
state didn't have a pointer to the context. There's no reason to do it
now days.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
gl_MaxVertexOutputVectors => ctx->Const.VertexProgram.MaxOutputComponents
gl_MaxFragmentInputVectors => ctx->Const.FragmentProgram.MaxInputComponents
v2: Add types so that the code compiles. Pointed out by Brian.
v3: Leave gl_MaxVaryingFloats et al. as-is. Suggested by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> [v2]
Reviewed-by: Marek Olšák <marek.olsak@amd.com> [v2]
Reviewed-by: Paul Berry <stereotype441@gmail.com> [v2]
v2 (Paul Berry <stereotype441@gmail.com>): Account for rework of
builtin_variables.cpp. Use INTERP_QUALIFIER_FLAT for gl_PrimitiveID
so that it will obey provoking vertex conventions. Convert to GLSL
1.50 style geometry shaders.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v3 (Paul Berry <stereotype441@gmail.com>): Be less obscure about
setting interpolation field of gl_Primitive variables.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
