SPI_SHADER_COL_FORMAT allocates export memory and CB_SHADER_MASK
map them to higher MRTs if necessary. The hardware allows to remap
MRTs to avoid holes somehow.
For example, if we have a scenario where MRT0 is unused and only
MRT1 and MRT2 are used, SPI_SHADER_COL_FORMAT is 0x77 and
CB_SHADER_MASK/CB_TARGET_MASK are 0x770 (this assumes
SPI_SHADER_UINT16_ABGR is set).
This allows us to remove one workaround that was added for fixing
GPU hangs with DXVK. I think this is because SPI_SHADER_COL_FORMAT
expects contiguous MRTs to be allocated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5434>
GFX6 doesn't support v_floor_f64 and the precision of v_fract_f64
which is used to implement 64-bit floor is less than what Vulkan
requires.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
The hardware precision of v_rcp_f64, v_sqrt_f64 and v_rsq_f64
is less than what Vulkan requires.
This lowers using the Goldschmidt's algorithm to improve precision.
Fixes dEQP-VK.glsl.builtin.precision_double.* on both compiler
backends.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
The ISA docs don't seem to say if this is allowed, so just assume short
loads require short alignment.
In practice, the only situation this should affect are byte-aligned u8vec2
loads.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5207>
The ISA docs don't seem to say if this is allowed, so just assume short
stores require short alignment.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5207>
This worked because the optimizer didn't consider that the 16-bit
instruction would interpret the inline constant differently. This will
change in the next commit.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5245>
Use sub-dword definitions so that the RA can use SDWA
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5245>
Shared subdword loads don't need byte alignment as they are split
into multiple loads if necessary.
Fixes: 5cde4989d3 ('aco: remove unnecessary split- and create_vector instructions for subdword loads')
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5441>
I think this case was just missing.
This fixes a bunch of 16-bit storage related CTS failures like
dEQP-VK.ssbo.phys.layout.single_basic_type.std430.u16vec4.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5226>
Use v_bfe to implement small bitsize conversions because the
compiler probably optimizes this better.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5226>
GFX6 and GFX7 don't have the ds_bpermute (or permute) instruction,
but we would like to support subgroup shuffle on these old GPUs.
So we introduce a new pseudio instruction which will be lowered
to an "unrolled loop" that emulates bpermute on GFX6 and GFX7
using readlane instructions, while also respecting the exec mask
thanks to v_cmpx.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5223>
The emulated GFX10 wave64 bpermute no longer needs a linear_vgpr,
so we don't consider it a reduction anymore. Additionally, the
code is slightly reorganized in preparation for the GFX6 emulated
bpermute.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5223>
Use s_memrealtime instead.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5117>
For 16-bit bank LDS (ie. Kabini/Stoney) we need a slightly different
path. It's completely untested though because I don't have these
chips but according to vkpipeline-db the generated assembly seems fine.
Note that 16-bit I/O is currently only exposed on GFX9+ for both
compiler backends.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4966>
We only have to adjust some assertions to allow storing/loading
16-bit values.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4966>
This is a requirement for the shaderResourceMinLod feature which
allows to clamp LOD. This uses all image_sample_*_cl variants.
All dEQP-VK.glsl.texture_functions.texture*clamp.* pass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4989>
v_frexp_exp returns the exponent as an unsigned value.
Also, v_ashr returns either 0 or -1 depending on the sign of the
source operand, but what we want is only the sign bit.
Fixes a bunch of recent dEQP-VK.glsl.builtin.precision_double.* tests.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4921>
Should be fine now that RA take full registers for v2b if it's
not an SDWA instruction.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4879>
Instead of relying on calling shader_io_get_unique_index repeatedly,
remember the which output driver location corresponds to which
varying slot.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4388>
VS needs the number of TCS inputs, and TES needs the number of TCS
outputs.
It is error-prone to repeat those calculations in both instruction
selection and setup. Just set them in one place instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4388>
