When MSAA is enabled, instead of using BLENDFACTOR_ZERO use CONST_COLOR,
CONST_ALPHA and supply zero by using blend constants.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24714>
Add unittest to test conversion of data from linear to
Tile-4 format based on bit swizzling conversion info
mentioned in Bspec.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13391>
Add memcpy function to convert linear data to Tile 4 format.
Tile 4 format consists of 4KB block divided into chunks of 512B.
Each 512B chunk/block is comprised of 8 64B blocks arranged in
Y-tile format.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13391>
Add unittests for linear to tiled and tiled to linear texture
conversions for Ytile. The test prints the source/output buffer
in hex format with debug flags to verify the result.
Linear to tile conversion fills the linear buffer with values
based on the OWORD index number i.e., OWORD3 will contain
all values filled as 0x03 and
OWORD3 = 0x03030303030303030303030303030303.
The Y-tile to Linear tile conversion uses a similar logic to place
the tiled values in a manner that will result in a linear buffer with
OWORDs filled according to index number as mentioned above.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13391>
We kept those tilings disabled up to know. Now that ISL has proper
support for them, remove this.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
Ys & Yf are both implemented in ISL now, we still have some Yf issues
to investigate. Instead of disabling them in ISL, we disable them in
the two drivers.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
The data in Ys/Yf/Tile64 tiled images is arranged differently for 2D &
3D images. Therefore we cannot assume that we will use 2D images for
blits/copies.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
A number of CTS tests are failing, like :
dEQP-VK.ycbcr.format.b8g8r8g8_422_unorm.vertex_optimal
Failures are reproduced on simulation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
This commit adds the code for choosing where to start the miptail and
enables miptails by default unless the client driver passes
info->min_miptail_start_level >= info->levels.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
Since the input & output arguments can point to the same location in
memory, if you ever access the input after writing the output you're
in trouble.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
This commit just adds a miptail start field to isl_surf and wires it up
in the RENDER_SURFACE_STATE and 3DSTATE_DEPTH code. We also add a
minimum miptail LOD so that client drivers have a knob to control the
miptails a bit.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
We're about to add separate code for Yf/Ys and this helps keep the diff
reasonable.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
With these tilings, everything is aligned to a tile and the tiled
surface size calculations will handle the array stride for us. We need
to provide an accurate 4D size so that 3D and multisampled images get
tiled correctly.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
This makes things a tiny bit stickier in isl_calc_phys_total_extent_el
but will be worth it when we enable Yf and Ys.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
The ICL+ PRMs show that this is not a supported thing anymore for
Ys/Yf and there isn't really much use for it in Vulkan/Sparse.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
The tile size calculations use a clever bit of math to make them short
and simple. We add unit tests to assert that they identically match the
tables in the PRM.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
The Yf and Ys tilings change a bit between SKL and later generations so
we have to be able to distinguish between them.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
Since this value is 0, it doesn't change anything, but it's just good
practice like we did for Gfx12.5 right above.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
ISL makes a bunch of decision on programming (MOCS,
RENDER_SURFACE_STATE values) based on this flag. It's important to set
it if we're going to use an image as storage.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23620>
With -Dintel-clc=system, the build system will search for an `intel_clc`
binary and use it instead of building `intel_clc` itself.
This allows Intel Vulkan ray tracing support to be built when cross
compiling without terrible hacks (that would otherwise be necessary due
to `intel_clc`'s dependence on SPIRV-LLVM-Translator, libclc, clang, and
LLVM).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24983>
The default batch size was increased to support large numbers of
INTEL_MEASURE snapshots for complex workloads. Some titles create
large numbers of small secondary command buffers, and quickly exhaust
memory. An example of this is Dota2, where INTEL_MEASURE increases
the memory usage by a factor of 20.
Allow the user to specify smaller batch sizes and buffer sizes.
Reviewed-by: Felix DeGrood <felix.j.degrood@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24860>
Instead of only initializing the clear color when the first subresource
is accessed, initialize it for every FCV-enabled subresource. This is
needed because writes to any subresource may be converted to fast
clears.
Now that init_fast_clear_color is called for every subresource, we take
care not to stomp on the fast-clear-tracking state of the first
subresource by moving the code which updates it outside of
init_fast_clear_color.
Now init_fast_clear_color does just what it says: initializes the fast
clear color.
This fixes the regression introduced with commit 57445adc89,
("anv: Re-enable CCS_E on TGL+").
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/8461
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24857>
