When multiview is enabled, we no longer care about when a particular
attachment is first or last used in a render pass, since not all views
in the attachment will meet that criteria. Instead, we need to track
each individual view (layer) in each attachment and emit our stores,
loads and clears accordingly.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
The Vulkan spec states that when multiview is enabled the number of
layers in the framebuffer is set to one and that each attachment
must then have at least as many layers as referenced by view masks
in the subpasses in which is used.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
We implement multiview by replicating draw commands for all enabled
views and setting a command buffer state for the currently active
view we are broadcasting to.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12034>
In v3dv_write_uniforms_wg_offsets() function, the job's cmd_buffer is a
valid command buffer, so there is no reason to check if its NULL or not.
This fixes CID#1487441 ("Dereference after null check") error.
v1:
- `job->cmd_buffer` is the same as `cmd_buffer` (Alejandro)
v2:
- Use `cmd_buffer` instead of `job->cmd_buffer` (Iago)
Fixes: 31a786c80a ("v3dv: handle QUNIFORM_FB_LAYERS")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11999>
We have a "maximum bpp of all render targets" field for several
packets. For them we were defining manually the possible values. But
all the possible values are the ones defined at the already defined
type "Internal BPP". So in practice we were defining the possible BPP
values twice.
Also for those fields, sometimes we were using the "Internal BPP" type
and in some other cases we were not, so this commit also adds some
consistency.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11976>
Generally, all meta operations that are implemented via the TLB and
only involve tile load/store operations only need one layer worth
of tile state memory and a single frame setup pointing the binner
to that memory.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11923>
With multilayered framebuffer we want to allocate enough tile state for
all layers involved, so te binner can handle layered rendering where
a geometry shader is used to redirect primitives to specific layers by
writing to gl_Layer.
However, we may also have layered framebuffers in cases where layered
rendering won't be used. Typically this will happen for meta copy/clear
operations, where we setup multilayered framebuffers but then we just
load and/or store the tile buffer without ever rendering a primitive,
let alone use a geometry shader to do layered rendering. In these cases
we can reduce the amount of tile state allocated to a sigle layer.
This patch allows us to specify if we should allocate tile state for all
layers when we start a new frame. We will take advantage of this in
later patches targetting the meta copy/clear code paths.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11923>
Our meta image clearing code was emitting a job per layer to clear,
but we can emit a single job that packs multiple layer clears for
better performance. For this we just need to make sure we pass
the maximum layer we can emit to v3dv_job_start_frame so we
allocate sufficent tile state memory.
Actually, since this operation is TLB based and doesn't make use of
layered rendering, we could do with allocating less tile state
memory too. We will improve this for this and many others TLB meta
implementations in follow up patches.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11923>
This change does the following:
- Moves image clearing code from v3dv_meta_copy.c to v3dv_meta_clear.c
where it belongs.
- Renames v3dv_meta_copy.h to v3dv_meta_common.h since now it is required
by the copy and clear code.
- Renames 'struct framebuffer_data' type.
- Merges v3dvx_meta_clear.c and v3dvx_meta_copy.c into v3dvx_meta_common.c.
- Prefixes all "public" meta functions with the 'meta' prefix.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11902>
We forgot to remove the v3dvx code for the clearing code fallbacks
we removed after we implemented layered clears.
Fixes: 5ba7f64b45 ('v3dv: remove fallback path for vkCmdClearAttachments')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11902>
OpenGL ES 3.1 specifies that a geometry shader can write to gl_PrimitiveID,
which can then be read by a fragment shader.
OpenGL ES 3.2 additionally adds the capacity for the fragment shader
to read gl_PrimitiveID even if there is no geometry shader. This
commit adds support for this feature, which is also implicitly
expected by the geometry shader feature in Vulkan 1.0.
Fixes:
dEQP-VK.pipeline.framebuffer_attachment.no_attachments
dEQP-VK.pipeline.framebuffer_attachment.no_attachments_ms
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11874>
For these we only need to check that the depth extent we are
copying is the same across regions in the batch, since we use
that to specify the number of layers in the framebuffer used
for the copy.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11843>
A run of dEQP-VK.*geom* has 6328 test passes and 16 failures. 14 of
these failures are related to a CTS bug affecting atomic operations
for which I submitted a CL to Khronos. Another fail looks like it might
be a case of the error threshold in CTS being slightly low. There is
only one test fail in that list that looks like it might be an actual
driver bug, but it is a variable pointers test, so it might be unrelated
to geometry shaders in the end.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11783>
This was required to handle the case of secondary command buffers that
did not have framebuffer information available from the primary, since
we used to have an implementation that required this information to
be available for the fallback path of vkCmdClearAttachments. Now that
we can handle our our attachment clears in the current subpass by
emitting draw calls, we no longer need the framebuffer information to
be available and we can remove this.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11783>
Now that we have geometry shaders, we can leverage this to implement
clears of layered framebuffers by adding a geometry shader in our
clear pipelines that redirects the clear rect to the appropriate
layer in the framebuffer, instead of falling back to emitting separate
clear jobs for each layer, which is a lot slower.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11783>
There is a bit of a corner case here for secondary buffers that
don't inherit framebuffer information, since those won't have
access to the number of layers in the framebuffer by the time
we get here. Since we only emit this to sanitize the value of
gl_Layer produced from geometry shaders, I think it is probably
fine to lie about it and just use the maximum number of layers
we support. The only issue with that is that broken shaders that
emit out of bounds layer indices (which the spect states may lead
to unfined shading results) may cause undefined results.
In the future we could do better and patch the uniform streams
later when the secondary is executed inside a primary, since we
will have the required framebuffer information at that point,
but for now this seems like a reasonable compromise.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11783>
Specifically A8B8G8R8_UINT_PACK32, A8B8G8R8_SINT_PACK32, and
A2B10G10R10_UINT_PACK32. They are based on the internal types RGBA8UI,
RGBA8I, and RGB10_A2UI, that are not filterable.
That gets several failing CTS like this:
dEQP-VK.api.copy_and_blit.core.blit_image.all_formats.color.3d.a8b8g8r8_uint_pack32.a8b8g8r8_uint_pack32.optimal_optimal_linear_stripes_x
To properly skip instead of fail. So we also update the ci
expectation.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11794>
When using subgroups there are additional restrictions to consider,
so for now we keep it simple and disable supergroup packing in that
scenario.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11620>
We follow the same approach that v3d. We compile the files that
depends on the version several times, passing a different version each
time. We link all those per-version libs on the main library.
Note that right now we only support version == 42, so the array of
supported versions is one-sized.
Also note that although we were doing a previous work to split
hw-version dependant code from general code, this is the first commit
that only inject the current V3D_VERSION on the former.
We have two cases where we hardcode the V3D_VERSION (as a full
wrapping would be an overkill) that we need to include here to avoid
warnings/errors if we do that before or after.
Having some exceptions also happens on v3d. As we are here we add some
comment on v3d clarifying that.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11310>
cl_packet_length depends on the specific hw generation packets, so it
is can't be included directly by main header.
The straight forward solution would be to allocate them dynamically,
based on the current generation. That ended to be complex and
messy. Also, even if that change between hw versions, it will not
change significantly.
So we just add some definition with the size of the packets we
prepack. We just need to be careful that this needs to be the maximum
value considering all the versions supported.
Note that on Opengl v3d does something similar, using hardcoded
values, but without a define, neither a runtime check.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11310>
As part of this, we get rid of the v3dv_xxx_descriptor structs to
v3dv_descriptor. The main reason is that in order to support several
versions, we would need to define them several times. Also, they were
somewhat an overkill even before, as their main advantage was getting
the offset for each data on the combined case. That functionality is
replaced with some new helpers.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11310>
This includes code from:
* v3dv_cmd_buffer
* v3dv_meta_copy
* v3dv_meta_clear
v2: move some of the functions to source files that makes more sense
now (Iago).
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11310>
