If a bug in an app/stater-tacker causes vertex buffer to fetch vertex
elements that are not bound, simply return zeros instead of crashing.
Reviewed-by: Brian Paul <brianp@vmware.com>
clang is supports most gcc options / extensions, with a some exceptions.
The biggest advantage of using clang is that compilation times are much
short.
One can tell scons to use clang when building by invoking it as
CC=clang CXX=clang++ scons libgl-xlib
From low to high bits, the sample positions are packed y0,x0,y1,x1...
Fixes arb_texture_multisample-sample-position piglit.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
We were assigning incorrect const register for immediates, and
potentially writing immediate const to the wrong location. This fixes
an incorrect-rendering bug with xonotic.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Set a few extra registers to make sure we are in proper state for
clearing. And also add some debug options to mark all state dirty in
clear and gmem operations to aid in debugging.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
There is a bit we need to set for 2D vs 3D fetch, to tell the hw whether
there are two or there valid input components.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The previous approach of using the dst register as an intermediate
temporary doesn't work in a lot of cases. For example, if the dst
register is the same as one of the src registers.
For now, just simplify it and always allocate a new register to use as
an intermediate. In some cases this will result in more registers used
than required. I think the best solution would be to implement an
optimization pass to reduce the number of registers used, which would
also solve the problem we have now of not being able to use GPRs that
are assigned for TGSI_FILE_INPUT.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Opps, didn't notice that I had left it stubbed out.
Also, make things fail a bit more gracefully when things go wrong.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Really this should be set based on buffer format, not on color vs
depth/stencil. Probably there should be more formats that set the bit
as we add support for more render target formats.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The libelf implementation that is distributed here:
http://www.mr511.de/software/english.html
requires calling elf_version() prior to calling elf_memory()
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Lighter weight then using streamout. Only evergreen
and newer asics support embedded data as src with
CP DMA.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike GEN6, the bits of entry count are distributed like this
width = (entry_count & 0x0000007f); /* bits [6:0] */
height = (entry_count & 0x001fff80) >> 7; /* bits [20:7] */
depth = (entry_count & 0x7fe00000) >> 21; /* bits [30:21] */
The maximum entry count is still limited to 2^27.
This was noted while going over the PRM. No test is impacted, because
1<<20 (the bit that moved) is much larger than GL_UNIFORM_BLOCK_MAX_SIZE,
GL_MAX_TEXTURE_BUFFER_SIZE, or MAX_*_UNIFORM_COMPONENTS.
v2: Explain more in the commit message (by anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
The inverse repeat count should taks up bits 31:15 and is in U1.16. Fixes
the "Restarting lines within a single Begin/End block" subtest of piglit
linestipple, and gets the other failing subtests much closer to passing.
v2: Rewrite commit message with more detailed piglit info (by anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, the only kind of ir_jump that would terminate a basic
block was "return". However, the other possible types of ir_jump
("break", "continue", and "discard") should terminate a basic block
too. This patch modifies basic block analysis so that it terminates a
basic block on any type of ir_jump, not just ir_return.
Fixes piglit test dead-code-break-interaction.shader_test.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Running piglit with this was causing all sort of weird stuff happening
to my desktop (Chromium webpages become blank, Qt Creator flickered,
etc). I tracked this down to shared memory segment leakage when GL is
not shutdown properly. The segments can be seen running `ipcs` and
looking for nattch==0.
This changes fixes this by calling shmctl(IPC_RMID) soon after creation
(which does not remove the segment immediately, but simply marks it for
removal when no more processes are attached).
This matches src/mesa/drivers/x11/xm_buffer.c behaviour.
v2:
- move shmctl(IPC_RMID) after XShmAttach() for *BSD, per Chris Wilson
- remove stray debug printfs, spotted by Ian Romanick
NOTE: This is a candidate for stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
We need to handle the leading vertex information when
assembling primitives for the geometry shader otherwise
the resulting triangles will have vertices at incorrect
input locations.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63702
v2: add a comment that this is just a workaround
v3: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The commit below exposed a bug in dri2_add_config.
commit 3998f8c6b5
Author: Ralf Jung <post@ralfj.de>
Date: Tue Apr 9 14:09:50 2013 +0200
egl/x11: Fix initialisation of swap_interval
This little code snippet near the bottom of dri2_add_config,
if (double_buffer) {
...
conf->base.MinSwapInterval = dri2_dpy->min_swap_interval;
conf->base.MaxSwapInterval = dri2_dpy->max_swap_interval;
}
it never did what it claimed to do. The assignment never changed the value
of conf->base.MaxSwapInterval, because dri2_dpy->max_swap_interval was,
until the above exposing commit, unitialized here. That is,
conf->base.MaxSwapInterval was 0 before and after assignment. Ditto for
the min swap interval.
Above the troublesome code snippet, the call to _eglFilterArray rejects
the config as unmatching if its swap interval bounds differ from the base
config's. Before the exposing commit, at the call to _eglFilterArray, the
swap interval bounds were always [0,0], and hence no config was rejected
due to swap interval.
After the exposing commit, _eglFilterArray incorrectly rejected some
configs, which prevented dri2_egl_config::dri_double_config from getting
set for the rejected config, which resulted in a NULL pointer getting
passed into dri2CreateNewDrawable, and then segfault.
The solution: set the swap interval bounds before _eglFilterArray.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63447
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
NOTE: This is a candidate for stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63569
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63569
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: Remove extra parenthesis (suggested by Brian).
NOTE: This is a candidate for stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63569
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
We accidentally set MESA_FORMAT_ETC2_RGB8_PUNCHTHROUGH_ALPHA1 twice,
rather than setting the RGB8 and SRGB8 formats.
NOTE: This is a candidate for stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63569
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The previous commit introduced extra words, breaking the formatting.
This text transformation was done automatically via the following shell
command:
$ git grep 'THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY' | sed 's/:.*$//' | xargs -I {} sh -c 'vim -e -s {} < vimscript2
where 'vimscript2' is a file containing:
/THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY/;/^ *$/ !fmt -w 78 -p '// '
:wq
Reviewed-by: Brian Paul <brianp@vmware.com>
The previous commit introduced extra words, breaking the formatting.
This text transformation was done automatically via the following shell
command:
$ git grep 'THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY' | sed 's/:.*$//' | xargs -I {} sh -c 'vim -e -s {} < vimscript
where 'vimscript' is a file containing:
/THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY/;/\*\// !fmt -w 78 -p ' * '
:wq
Reviewed-by: Brian Paul <brianp@vmware.com>
This brings the license text in line with the MIT License as published
on the Open Source Initiative website:
http://opensource.org/licenses/mit-license.php
Generated automatically be the following shell command:
$ git grep 'THE AUTHORS BE LIABLE' | sed 's/:.*$//g' | xargs -I '{}' \
sed -i 's/THE AUTHORS/THE AUTHORS OR COPYRIGHT HOLDERS/' {}
This introduces some wrapping issues, to be fixed in the next commit.
Reviewed-by: Brian Paul <brianp@vmware.com>
See previous commit for the rationale. These weren't caught by the
automatic conversion due to the "OR IBM" addition.
Reviewed-by: Brian Paul <brianp@vmware.com>
Generated automatically be the following shell command:
$ git grep 'BRIAN PAUL BE LIABLE' | sed 's/:.*$//g' | xargs -I '{}' \
sed -i 's/BRIAN PAUL/THE AUTHORS/' {}
The intention here is to protect all authors, not just Brian Paul. I
believe that was already the sensible interpretation, but spelling it
out is probably better.
More practically, it also prevents people from accidentally copy &
pasting the license into a new file which says Brian is not liable when
he isn't even one of the authors.
Reviewed-by: Brian Paul <brianp@vmware.com>
There used to be a derived state _ClampReadColor, so setting _NEW_COLOR
made sense. The state is gone now.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We don't want to set the flag for Gallium.
I think only swrast needs the flag to be set for occlusion queries.
v2: fix stats_wm updates in i965
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
