The Vulkan spec says:
"If samples is not VK_SAMPLE_COUNT_1_BIT, then imageType must be
VK_IMAGE_TYPE_2D, flags must not contain
VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT, mipLevels must be equal to 1..."
So, the source image is always 2D with no mipmaps.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26316>
The Vulkan spec says multi-planar images can only be copied on a
per-plane basis. The COLOR_BIT to "all planes" expansion applies to
image memory barriers which is completely unrelated.
Remove the expansion logic to simplify the code. Add assertions to
clearly describe the invariant.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26364>
When the pitch or slice pitch isn't properly aligned,
the SDMA HW is unable to copy between tiled images and buffers.
To work around this, we process the image chunk by chunk,
copying the data to a temporary buffer which uses supported
pitches, and then copy it to the intended destination.
The implementation assumes that at least one pixel row of the
image will fit into the temporary buffer, and will try to copy
as many rows at once as possible. Sadly, this still results in
a lot of packets being generated for large images.
A possibe future improvement is to copy the image slice by slice
when only the slice pitch is misaligned. However, that is out
of scope for this commit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25831>
Some copy operations are poorly supported by the SDMA hardware,
meaning that the built-in packets don't support them, so we will
need to work around that by copying to and from a temporary BO.
The size of the temporary buffer was chosen so that it can fit
at least one full pixel row of the largest possible image.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25831>
Previously, RADV only had a simple implementation of
image to buffer copies using the SDMA for the PRIME copy.
This commit replaces that with a full-featured implementation
that includes buffer to image and image to buffer copies and
removes the assumptions that the PRIME copy had, as well as
adds new helper functions which will be shared with other copy
functions in upcoming commits.
Unaligned buffer/image copies require a workaround, which
will be implemented by a future commit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25831>
this patch calls the init and finish functions of the vk
runtime astc decoder. initializes emulate_astc flag. sets
up the additional plane to store decoded texture.
v2: fix _tex_dataformat() and _tex_numformat() (Chia-I Wu)
use correct function for bufferToImage (Chia-I Wu)
v3: add radv_is_layout_emulated() (Chia-I Wu)
avoid repeated pattern (Chia-I Wu)
v4: not create all pipelines on_demand (Chia-I Wu)
v5: current code does not support astc hdr (Chia-I Wu)
v6: keep luts in staging buffer only (Chia-I Wu)
v7: use 2DArray for both input and output
v8: document todo to use fp16 (Chia-I Wu)
not required to move meta init anymore (Chia-I Wu)
move astc_emulation_format to vk_texcompress_astc.h (Chia-I Wu)
v9: remove LAYOUT check (Chia-I Wu)
check on iview->vk.view_format
move setting tiled flags for astc (Chia-I Wu)
remove is format emulated check in radv_is_storage_image* (Chia-I Wu)
use LAYOUT_ASTC for if check (Chia-I Wu)
no 1D support (Chia-I Wu)
calculate start end offset in 2x blk size
v10: remove old wrong code (Chia-I Wu)
v11: use existing defined local format variable (Chia-I Wu)
dst image layout is always VK_IMAGE_LAYOUT_GENERAL (Chia-I Wu)
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24672>
There are some minor differences
- fix incorrectly use of device->meta_state.resolve_compute.p_layout
- when on_demand is true, the creation of ds and pipeline layouts are
also deferred
- unlike radv_meta_get_view_type, vk_texcompress_etc2_image_view_type
returns 1d/2d array image views
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25071>
SAMPLE_STREAMOUTSTATS requires PIPELINESTAT_START to be enabled,
otherwise the hw doesn't count anything.
This fixes
dEQP-VK.transform_feedback.primitives_generated_query.concurrent.pipeline_statistics_2.*
on GFX8. GFX6-9 are probably also affected by this bug, but with NGG
these queries are slightly different and don't use legacy streamout.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25049>
Previously, it was restricted to clear colors where R==G==B, but it seems
to work if that isn't the case.
This restriction was probably a leftover from before comp-to-single.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24400>
Instead, we replace every use of it with nir_def. Most of this commit
was generated by sed:
sed -i -e 's/dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
A few manual fixups were required in lima and the nir_legacy code.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
sed + ninja clang-format + fix up spacing for common code.
If you are unhappy that I did not manually change the whitespace of your driver,
you need to enable clang-format for it so the formatting would happen
automatically.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24428>
There's plenty of places we can use these new and shiny helpers, so
let's clean up the code a bit.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23460>
Via Coccinelle patches
@@
expression a, b, c;
@@
-nir_channels(b, a, (1 << c) - 1)
+nir_trim_vector(b, a, c)
@@
expression a, b, c;
@@
-nir_channels(b, a, BITFIELD_MASK(c))
+nir_trim_vector(b, a, c)
@@
expression a, b;
@@
-nir_channels(b, a, 3)
+nir_trim_vector(b, a, 2)
@@
expression a, b;
@@
-nir_channels(b, a, 7)
+nir_trim_vector(b, a, 3)
Plus a fixup for pointless trimming an immediate in RADV and radeonsi.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23352>
RGP will crash if we emit a layout transition marker outside a barrier.
If this happens, trigger an assertion if its enabled or silently discard
the marker otherwise to avoid traces that cannot be opened.
Also, guard against attempts to start barrier markers recursively, since
this will corrupt the internal start/end matching.
Closes: <https://gitlab.freedesktop.org/mesa/mesa/-/issues/7971>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21033>
==10199== Conditional jump or move depends on uninitialised value(s)
==10199== at 0xA107B13: radv_resume_queries (radv_meta.c:93)
==10199== by 0xA108097: radv_meta_restore (radv_meta.c:225)
==10199== Uninitialised value was created by a stack allocation
==10199== at 0xA1145B2: fill_buffer_shader (radv_meta_buffer.c:171)
saved_state is never memset, so the value should be inited.
Cc: mesa-stable
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23327>
CTS is testing 2D to 3D image copies but the checks are incomplete and
we used to only copy the first slice.
This should fix
dEQP-GLES31.functional.copy_image.non_compressed.*.texture2d_array_to_texture3d
with ANGLE.
Cc: mesa-stable
Suggested-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23231>
There's little point in open-coding this, when we already have a helper
for it.
This adds an fsat to both code-paths. Not sure if that's good or bad, or
if it even matters at all.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23201>
When doing nir_fsub(b, x, imm), we can negate the immediate value, and
replace the fsub with nir_fadd_imm() and get the same result. This makes
the code a bit shorter and easier to read.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23179>
This simplifies things a bit. Note that in some cases, the arguments are
swapped, because multiplications are commutative, and nir_fmul_imm only
allows the second operand to be an immediate.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23179>
