Issue was hit with this configuration:
--disable-{egl,gbm} --with-platform=drm
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 3208fd2e46 ("configure: move platform handling further up")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 610f956fde)
fixes a couple of deqp tests (on nvc0 and potential other drivers):
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_3
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 987744be98)
This builds on the recent interpolate fix by Rhys ee8488ea3b.
This fixes the arb_gpu_shader5 interpolateAt* tests that contain
arrays.
Fixes: ee8488ea3b ("ac/nir,radv,radeonsi/nir: use correct indices for interpolation intrinsics")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9e669ed22b)
Otherwise writes get propagated across atomics if no barrier is
used. Without barrier writes should still be visible in the same
invocation, so an atomic has to be considered a write.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: b3c6146925 "nir: Copy propagation between blocks"
Fixes: 62332d139c "nir: Add a local variable-based copy propagation pass"
(cherry picked from commit 8424cd8fbd)
We had defined MAX_IMAGES as 8, which we used to size the array for
image push constant data. The comment there stated that this was for
gen8, but anv_nir_apply_pipeline_layout runs for all gens and writes
that array, asserting that we don't exceed that number of images,
which imposes a limit of MAX_IMAGES on all gens.
Furthermore, despite this, we are exposing up to 64 images per shader
stage on all gens, gen8 included.
This patch lowers the number of images we expose in gen8 to 8 and
keeps 64 images for gen9+ while making sure that only pre-SKL gens
use push constant space to handle images.
v2:
- <= instead of < in the assert (Eric, Lionel)
- Change the way the assertion is written (Eric)
v3:
- Revert the way the assertion is written to the form it had in v1,
the version in v2 was not equivalent and was incorrect. (Lionel)
v4:
- gen9+ doesn't need push constants for images at all (Jason)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v3)
(cherry picked from commit f92c5bc8f3)
Instead of taking a whole pipeline (which could be anything!), just take
a physical device and robust_buffer_access boolean. This makes it
easier to verify that only the things in the hash actually affect
pipeline compilation.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit a24654b49d)
Noticed while debugging V3D -- the ro->gpu_fd was freshly opened in ro
setup, and it needs to stay open until screen close (since it may be used
by renderonly) and should be the same one used by the vc4 screen.
Fixes: 7029ec05e2 ("gallium: Add renderonly-based support for pl111+vc4.")
(cherry picked from commit 99ef66c325)
This was already enabled for gallium based osmesa with gallium drivers
in 9d10581897, so do the same for classic
driver with classic osmesa.
Fixes: cbbd5bb889
("meson: build classic osmesa")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
(cherry picked from commit 431e9abaab)
Various recreation scenarios lead to API thread getting stuck in
swr_fence_finish(). This is a multi-context issue, whereby one context
overwrites the fence read-value with a previous sync's lesser value.
The fence sync value is supposed to be always increasing.
In swr_fence_cb(), only update the "read" value if the new value is
greater.
(This may seem like we're not waiting on the other context to finish, but
had we needed for it to finish there would have been a wait prior to
submitting a new sync.)
cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ed7673afd2)
`with_gallium_icd` is never used throughout the different Meson build
files, whereas `with_opencl_icd` tracks whether or not `gallium-opencl`
was set to "icd".
Fixes: 42ea0631f1
("meson: build clover")
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit 0b736f7fd4)
Looking at -pro we need to enable it for pipelines with just a
GS too.
This seems to reduce the hangs from
https://bugs.freedesktop.org/show_bug.cgi?id=109242 on a RX 550 to
the point where I can't reproduce, after the false start with the
wd_switch_on_eop patch due to flakiness.
(but people are reporting it does not fix the issue completely for
them on polaris 11)
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 568e7a2998)
Only needed when the pipeline actually uses tessellation. I don't
think that changes anything, except improving readability.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit d9d14346c2)
ported from AMDVLK.
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 5183e794af)
Causes hangs on some machines.
What works for dEQP-VK.tessellation.shader_input_output.barrier:
- running num_patches = 6 (which limits LDS to 32 KiB)
- running num_patches = 8, and artificially cutting LDS size at 32 KiB.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 76b12fa564)
"&>" is bash specific.
Fixes: e0dbfc9953 ("bin/get-pick-list.sh: warn when commit lists invalid sha")
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
(cherry picked from commit 3ec9ab80b8)
"--summary" will also print extended header information such as
creations, renames and mode changes.
Let's just use "--no-patch", which suppresses the diff output.
v2: Use "--no-patch" instead of the "-s" abbreviation (Eric).
Fixes: 559c32d241 ("bin/get-pick-list.sh: simplify git oneline printing")
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
(cherry picked from commit 716ed41a36)
This ends up refactoring visit_load_buffer() a little.
Fixes: 7e7ee82698 ('ac: add support for 16bit buffer loads')
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108114
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit bde9f482de)
Note: this is a backport of the above commit provided by Rhys.
Linking against LLVM built with BUILD_SHARED_LIBS fails otherwise,
as the component is required for the draw module.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit 4275cae95c)
opnd() might delete the passed in instruction, but it's used through
i->srcExists() later in visit
v2: use continue instead return
v3: use brackets for the outer if/else chain
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 77944fb2b7)
The num_components value passed into get_mul_for_src is used to only
compose the parts of the swizzle that we know will be used so we don't
compose invalid swizzle components. However, we had a bug where we
passed the number of components of the add all the way through. For the
given source, we need the number of components read from that source.
In the case where we have a narrow add, say 2 components, that is
sourced from a chain of wider instructions, we may not compose all the
swizzles. All we really need to do is pass through the right number of
components at each level.
Fixes: 2231cf0ba3 "nir: Fix output swizzle in get_mul_for_src"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 1ede463b6e)
The check for location aliasing was always asuming output variables
but this validation is also called for input variables.
Fixes: e2abb75b0e ("glsl/linker: validate explicit locations for SSO programs")
Cc: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 428164d87f)
Currently the visitor attempts to enforce the regioning restrictions
that apply to double-precision instructions on CHV/BXT at NIR-to-i965
translation time. It is possible though for the copy propagation pass
to violate this restriction if a strided move is propagated into one
of the affected instructions. I've only reproduced this issue on a
future platform but it could affect CHV/BXT too under the right
conditions.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit c301f447ea)
I triggered this bug while prototyping code for a future platform on
IVB. Could be a problem today though if a strided move is
copy-propagated into a type-converting move with DF destination.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 464e79144f)
This seems to be a problem in combination with the lower_regioning
pass introduced by a future commit, which can modify a SIMD-split
instruction causing its execution size to become illegal again. A
subsequent call to lower_simd_width() would hit this bug on a future
platform.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit bc781a0323)
Align16 is no longer a thing, so a new implementation is provided
using Align1 instead. Not all possible swizzles can be represented as
a single Align1 region, but some fast paths are provided for
frequently used swizzles that can be represented efficiently in Align1
mode.
Fixes ~90 subgroup quad swap Vulkan CTS tests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit 812ede088f)
lower_integer_multiplication() implements 32x32-bit multiplication on
some platforms by bit-casting one of the 32-bit sources into two
16-bit unsigned integer portions. This can give incorrect results if
the original instruction specified a source modifier. Fix it by
emitting an additional MOV instruction implementing the source
modifiers where necessary.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
(cherry picked from commit c5f9c0009d)
We have found some pipe_surface leaks internally.
This is the same code as surface_destroy in radeonsi.
Ideally, surface_destroy would be in pipe_screen.
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit e986c1ca1d)
With Mesa 18.1, commit be973ed21f, si_llvm_load_input_vs()
changed the number of source 32-bit wide dword components
used for fetching vertex attributes into the vertex shader
from a constant 4 to a variable num_channels number, depending
on input data format, with some special case handling for
input data formats like 64-Bit doubles.
In the case of a GL_DOUBLE input data format with one
or two components though, e.g, submitted via ...
a) glTexCoordPointer(1, GL_DOUBLE, 0, buffer);
b) glTexCoordPointer(2, GL_DOUBLE, 0, buffer);
... the input format would be SI_FIX_FETCH_RG_64_FLOAT,
but no special case handling was implemented for that
case, so in the default path the number of 32-bit
dwords would be set to the number of float input components
derived from info->input_usage_mask. This ends with corrupted
input to the vertex shader, because fetching a 64-bit double
from the vbo requires fetching two 32-bit dwords instead of 1,
and fetching a two double input requires 4 dword fetches
instead of 2, so in these cases the vertex shader receives
incomplete/truncated input data:
a) float v = gl_MultiTexCoord0.x; -> v.x is corrupted.
b) vec2 v = gl_MultiTexCoord0.xy; -> v.x is assigned
correctly, but v.y is corrupted.
This happens with the standard TGSI IR compiled shaders.
Under NIR with R600_DEBUG=nir, we got correct behavior
because the current radeonsi nir code always assigns
info->input_usage_mask = TGSI_WRITEMASK_XYZW, thereby
always fetches 4 dwords regardless of what the shader
actually needs.
Fix this by properly assigning 2 or 4 dword fetches for
one or two component GL_DOUBLE input.
Fixes: be973ed21f ("radeonsi: load the right number of
components for VS inputs and TBOs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 5e30e54e05)
Fixes artifacts in World of Warcraft when Multi-sample Alpha-Test is
enabled with DXVK.
It also fixes artifacts with Fallout 4's god rays with DXVK.
Various piglit interpolateAt*() tests under NIR are also fixed.
v2: formatting fix
update commit message to include Fallout 4 and the Fixes tag
Fixes: f4e499ec79 ('radv: add initial non-conformant radv vulkan driver')
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106595
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit ee8488ea3b)
This has never functioned and probably wont ever function, due to the
way gallium media state trackers are architected and the tegra video
decoder is architected.
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: 1755f608f5
("tegra: Initial support")
(cherry picked from commit 401dca1c73)
In the following scenario :
1. Create image format R8G8B8A8_UNORM
2. Create image view format R8G8B8A8_SRGB
3. Clear the view through a sub pass to a particular color
4. Barrier on the image to from color attachment to source transfer
5. Copy the image into a linear buffer to check the content
The step 4 resolving the clear color is unaware of the SRGB format of
the view, because the blorp resolve operations operate on images the
color associated with the resolve will not operate on SRGB format but
UNORM. Leading to the wrong color being written into surfaces.
This change forces a clear color resolve at the end of the render pass
so following resolves won't have to deal with the clear color with a
format that doesn't match the image's format.
On gfxbench vulkan_5_normal 1280x720, this appear to cost us ~0.5fps,
from 49.316 down to 48.949.
v2: Only fast clear resolve when image & view have different formats
(Lionel)
v3: Update warning (Jason)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108911
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit add5a2ec92)
Resolve operations can happen when dealing with view (begin/end
subpasses) in which case the view's format needs to apply, not the
image's format.
v2: Relayout arguments of a ccs_op() call (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108911
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 366eb656ac)
The SPIR-V spec was recently updated to clarify that array indices are
treated as signed integers.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
(cherry picked from commit c59f07684c)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/compiler/spirv/vtn_variables.c
The loop through instructions doesn't set the cursor for us so unless we
set it somewhere, we may end up emitting instructions in the wrong
place. The only reason why we haven't been bitten by this in the past
is that it only happens in a few variable pointers cases and the CTS
tests for those don't use much control flow so things were getting
emitted in the correct order by accident.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
(cherry picked from commit f8992eb5ba)
This crops up both in the actual SPIR-V VectorInsert/Extract opcodes as
well as various places where we deal with vector derefs.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
(cherry picked from commit 42b2f3e91f)
They can be handled exactly the same as arrays, we just need to handle
the base type correctly in the switches.
Fixes: a45b6fb452 "spirv: Pass SSA values through functions"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109204
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 70ed049cc6)
Note that these limits are exact, not a "precision is at least x",
as texel coords also get snapped to a multiple of this step size
before filtering.
This fixes CTS tests
dEQP-VK.texture.explicit_lod.2d.sizes.31x55_nearest_linear_mipmap_nearest_repeat
dEQP-VK.texture.explicit_lod.2d.sizes.57x35_nearest_linear_mipmap_nearest_repeat
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109151
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 3cc940277a)
We do the ImageFormatProperties check already, and rejecting an usage
flag when both ImageFormatProperties and the WSI (which is Android)
support it is not allowed.
Intel does support storage for some of the support WSI formats, such
as R8G8B8A8_UNORM, and looking at the ISL_SURF_USAGE_DISABLE_AUX_BIT,
the imported images do not have any form of compression that would
prevent this fix.
v2: Also consider STORAGE bit for Gralloc usage bits.
(From Kevin Strasser <kevin.strasser@intel.com>)
Fixes: 053d4c328f "anv: Implement VK_ANDROID_native_buffer (v9)"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
(cherry picked from commit 110564fdec)
We started using it in the btoi paths for r32g32b32, and the LLVM IR
checker will complain about it because we end up with intrinsics with
the wrong type extension in the name.
Fixes: 593996bc02 ("radv: implement buffer to image operations for R32G32B32")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 9a45a190ad)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/amd/common/ac_nir_to_llvm.c
In 92eb5bbc68 we attempted to avoid copying clear colors whenever
we weren't doing a resolve. However, this broke MSAA resolves because
we need the clear color in the source. This patch makes blorp much more
conservative such that it only avoids the clear color copy if either
aux_usage == NONE or it's explicitly doing a fast-clear.
Fixes: 92eb5bbc68 "intel/blorp: Only copy clear color when doing..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107728
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
(cherry picked from commit 19c608fe43)
When copy_prop_vars also took care of dead write handling, intrin was
used as part of store_to_entry. Now it isn't, so this assignment
isn't used really used. Add a comment clarifying what happens to
intrin.
Fixes: 4dfa7adc10 "nir: Remove handling of dead writes from copy_prop_vars"
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit bbf9ee9b18)
Even with the previous commit, hangs are still happening. The problem
there is that the VF cache invalidate do happen immediately without
waiting for previous rendering to complete. What happens is that we
invalidate the cache the moment the PIPE_CONTROL is parsed but we
still have old rendering in the pipe which continues to pull data into
the cache with the old high address bits. The later rendering with the
new high address bits then doesn't have the clean cache that it
expects/needs.
v2: Update commit message/explanation with Jason's
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: a363bb2cd0 ("i965: Allocate VMA in userspace for full-PPGTT systems.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109072
(cherry picked from commit 31e4c9ce40)
