Piglit has been fixed to skip this test when no GLES 3.2 support is present.
Fixes: dfabed2fc9 ("Uprev Piglit to cf8daaf5ba90fc9b8a0e144355026e2a14c79944")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30020>
Enable MSAA by default and update CI expectation.
The spec@ext_framebuffer_multisample test is buggy and switches from fail
to skip once we actually expose multisample capabilities, while it should
also have skipped before.
Some of the *copyteximage and spec@!opengl 1.1@depthstencil-default_fb*
tests require multisample resolve blits with parameters that can not be
supported natively with the RS engine and can also not be emulated by
u_blitter without texture multisampling, which is not available in the
GC2000 hardware. Accept those failures on this HW generation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22439>
7e82c59fa4 ("Uprev Piglit to dd6f7eaf82e8dd442da28b346c236141cbcce0b1") pulled
in fixes to the testsuite, which makes two more tests pass on GC2000.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28744>
Now that we properly switch between fast/regular clears for depth/stencil
surfaces as needed and fixed the resulting corner-case issues, there are
two more passing dEQP tests.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28696>
Reviewer the results from the last nightly run completed using ci-collate tool
(gl.fd.o/gfx-ci/ci-collate) with the 'patch' feature and a bit of human
intervention, these are the changes in the expectations.
Signed-off-by: Sergi Blanch Torne <sergi.blanch.torne@collabora.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28350>
Now that the negative lodbias bug is fixed we can expect tests
using this to pass.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28224>
Vivante NPUs contain MAC arrays that can be used to perform
convolution operations on tensors.
This commit implements the Gallium functions that accept convolutions
and executes them on these MAC arrays.
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25714>
This commit adds etnaviv.xml which describes the used ISA. Quite some
time was spend to to get it into that shape by creating a big collection
of shader asm generated by the binary blob. These shaders are used as basis
for test driven development for this ISA specification.
The xml has some black spots but the internal disasm is used by
developers so that should be no problem. Some refinement will happen
during normal development.
This commit adds only disasm support.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20144>
All these jobs are redundant and a waste of resources:
- the containers have already been built & pushed in the merge pipeline
- the mesa build variants have already all passed
- the driver tests have already all passed
None of these jobs are doing anything useful in this pipeline, but it
costs a factor of 2x to our infrastructure, so let's remove them.
In other words, the only job left in the post-merge pipeline is the
`pages` job that deploys the update to the website.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26451>
Calling etna_rs_gen_clear_surface(..) during surface creation could end
in the following assert:
etna_rs_gen_clear_surface: Assertion `!"" "bpp not supported for clear by RS"'
Lets call etna_rs_gen_clear_surface(..) only when it is needed.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26096>
We could make asan use a toml setup that just skipped this for asan, but
this is quick and easy and I don't think there's too much risk here. This
would make every asan job I've looked at in the nightlies pass.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25509>
The blob replicates both the value mask as well as the stencil reference
of the back-facing stencil to the front-facing stencil. This fixes the
remaining failures in the following dEQPs:
dEQP-GLES2.functional.fbo.render.*_stencil_index8
Fixes: c8ccd63911 ("etnaviv: Fix depth stencil ops on GC880/GC2000")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4867>
We don't need the path, not at all when we use external kernel.
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24646>
If there is a FS input but no VS output the behavior is undefined
but okay. Use a register 0 (position) for such cases.
glsl-routing test triggers it with e.g. the following subtest.
Test: VS(C0 -- T0 -- T2 -- T4 T5)
FS(C0 C1 T0 T1 T2 T3 T4 T5)
This will now end with following linker debug output:
link result:
vs -> fs comps use pa_attr
t1 -> t1 xyzw 0,0,0,0 0x000002f1
t2 -> t2 xyzw 0,0,0,0 0x000002f1
t0 -> t3 xyzw 0,0,0,0 0x000002f1
t3 -> t4 xyzw 0,0,0,0 0x000002f1
t0 -> t5 xyzw 0,0,0,0 0x000002f1
t4 -> t6 xyzw 0,0,0,0 0x000002f1
t5 -> t7 xyzw 0,0,0,0 0x000002f1
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24030>
There are cases where there is a chain to an unused nir variable that get removed
by nir_opt_dce. This breaks our current linker as the variable can still be accessed
via nir_foreach_shader_in_variable(..) macro.
So lets call nir_remove_dead_variables(..) just before we setup our linking.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23673>
I have been running ci stress tests during the last few days
and nights and this is what I needed to get a pass rate > 80%.
There are still many flakes but I think this is a good starting
point to make better use of the ci.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23797>
