Avoid using a sparse and relatively large array for HALIGN encoding.
Additionally, this provides validation of the input alignment values.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
We're going to start asserting for valid halign/valign values during
surface state emission. Pre-SKL, isl_surf_get_uncompressed_surf creates
uncompressed surfaces with invalid halign/valign values - 1x1. Fix this
by replacing the call to isl_surf_get_image_surf with isl_surf_init,
passing in the uncompressed format up-front.
As we're no longer using isl_surf_get_image_surf, we also need to get
the x and y offset of the image ourselves. Instead of getting a
sample-based offset, then converting to elements later on, we use
isl_surf_get_image_offset_B_tile_el to get the offset in elements
up-front.
With the above two changes, the generic code after the else-block is no
longer needed for the single-layer-view code path. We move it and
specialize it to the if-block (which is executed SKL+ and handles
multi-layer views).
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
Stencil on Gfx7 has a vertical alignment element of 8, but the largest
its surface state can express is 4. Apply the Gfx6 solution of changing
the alignment in blorp_surf_retile_w_to_y.
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
On XeHP, NPOT and POT formatted surfaces will use different image
alignment units when emitting surface states. When BLORP fakes an RGB
image as RED, update the image alignment to prevent assert failures when
emitting surface states.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
Try to avoid having to update isl_gfx6_filter_tiling when new tilings
are added for new platforms. Note that the allow-list uses
ISL_TILING_ANY_Y_MASK and thus assumes that no new Y-tilings will be
added in the future.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
In order to size Tile64 surfaces correctly, make sure that the total
physical extent is arrayed. The code should handle 3D surfaces as well,
but is untested for now.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
Implement the new XeHP alignment rules for surface layout.
RENDER_SURFACE_STATE objects still need updating, but that's left for a
separate commit.
Rework:
* Nanley: Include Sagar's VALIGN fix for D16_UNORM.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
XeHP defines new tiling formats, Tile4 and Tile64. They are needed in
order to support depth/stencil surfaces and multisampling. Create new
ISL enums and define some initial tiling information in order to enable
them later on.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
They are not used yet but the layout of Yf and Ys tiles are dependent on
these parameters. While we're here, better document the function.
Rework:
* Nanley: Update crocus.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12132>
v2: Very significant rebase on changes to previous commits.
Specifically, brw_fs_nir.cpp changes were pretty much rewritten from
scratch after changing the NIR opcode names and types.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12142>
Program the producers/consumer fields for TCS Barrier messages.
Producer and consumer fields are set to number of TCS threads.
Ref: Bspec 54006 for Barrier Data Payload
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11963>
Rearrange if/else fragments to unify case for Gen11 or later
platforms. This will help the code look cleaner for adding
unified barrier support to TCS.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11963>
This commit does several things:
* Unify code common to several drivers by evaluating INTEL_NO_HW within
intel_get_device_info_from_fd (suggested by Jordan).
* For drivers that keep a copy of the intel_device_info struct, a
separate copy of the no_hw field is now unnecessary. Remove them.
* Minimize kernel queries when INTEL_NO_HW is true. This is done for
code simplification, but we may find reason to undo this later on.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12007>
The prior method of checking the result of getenv() for NULL would cause
the feature to be enabled for INTEL_NO_HW=0.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12007>
Implement the workarounds in anv and iris instead.
Before this commit, ISL unconditionally modified workaround registers
while filling out depth stencil state. To account for this, drivers
unconditionally stalled prior to emitting depth stencil packets. This
hurt performance.
By having the drivers perform the workarounds, they can choose when to
modify the relevant registers. The drivers now avoid emitting the
workaround for NULL depth buffers. This reduces stalls and leads to
better performance.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (the ISL/Anv bits)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (the Iris bits)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11454>
A lot of CTS tests write a u8vec4 or an i8vec4 to an SSBO. This results
in a lot of shifts and MOVs. When that pattern can be recognized, the
individual 8-bit components can be packed much more efficiently.
v2: Rebase on b4369de27f ("nir/lower_packing: use
shader_instructions_pass")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
Emitting the instructions one by one results in two MOV instructions
that won't be propagated. By handling both instructions at once, a
single MOV is emitted. For example, on Ice Lake this helps
dEQP-VK.spirv_assembly.type.vec3.i8.bitwise_xor_frag:
SIMD8 shader: 49 instructions. 1 loops. 4044 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 41 instructions. 1 loops. 3804 cycles. 0:0 spills:fills, 5 sends
Without "intel/fs: Allow copy propagation between MOVs of mixed sizes,"
the improvement is still 8 instructions, but there are more instructions
to begin with:
SIMD8 shader: 52 instructions. 1 loops. 4164 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 44 instructions. 1 loops. 3944 cycles. 0:0 spills:fills, 5 sends
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
In the vec4 compiler, 8-bit types should never exist.
In the scalar compiler, 8-bit types should only ever be able to exist on
Gfx ver 8 and 9.
Some instructions are handled in non-obvious ways.
Hopefully this will save the next person some time.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
Instead of making LMEM the special case, unify the two paths by setting
up a fake drm_i915_query_memory_regions struct and filling it out based
on OS queries. The important functional change here is that we now pass
system memory through the same GTT size and 3/4 filter that we were
using with the OS queries. This should make behavior consistent on
integrated GPUs regardless of whether or not we have the memory region
query API.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12433>
Even though we can't really do the parsing on behalf of the driver (it's
too complicated), storing it in the vk_image lets us provide a common
implementation of vkGetImageDrmFormatModifierPropertiesEXT(). It'll
also be useful in the next few commits for swapchain images.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12023>
