Without this we might choose 8 or 16 width, while the app assumes 32.
With subgroup operations it may cause wrong calculations and thus bugs.
Examples of such games are Aperture Desk Job and DOOM Eternal.
v2: Make it a driconf option instead of applying unconditionally, move
from brw_required_dispatch_width to brw_compile_cs
v3: Rename allow_assuming_full_subgroups -> assume_full_subgroups.
Include assume_full_subgroups value in anv_pipeline_hash_compute().
v4: Move actual workaround code from brw_fs.c -> anv_pipeline.c.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6171
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15708>
(cherry picked from commit 28ca5636f6)
With mutable descriptor types, we can end up in a situation where a
binding can be, for instance, both a UBO and an acceleration
structure.
While we can promote the UBO to a binding table entry and the shader
can use it, this isn't true of acceleration structures that have no
surface state. In that case just skip the entry. The shader is already
compiled to use the descriptor entry.
In the non mutable case, the entry will not be created by
anv_nir_apply_pipeline_layout.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 63e91148b7 ("anv: Enable VK_VALVE_mutable_descriptor_type")
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15969>
(cherry picked from commit fe413962b4)
Computations for indexing in-memory data structures for ray queries
depend on this.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4f9141607f ("intel: Add device info for DG2")
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15925>
(cherry picked from commit 107acf5a4a)
Call flush_pipeline_select_3d in CmdBeginRendering() to emit a dummy MEDIA_VFE_STATE
before switching from GPGPU to 3D.
Original commit with the fix:
bc612536 ("anv: Emit a dummy MEDIA_VFE_STATE before switching from GPGPU to 3D")
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Gitlab: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6201
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15954>
(cherry picked from commit 785b6579ae)
There is no reason not to be able to get it.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 34a0ce58c7 ("anv: add a new execution mode for secondary command buffers")
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15968>
(cherry picked from commit 184084e21c)
c78be5da30 ("intel/fs: lower ray query intrinsics") introduced a
helper function using nir_(push|pop)_if which invalidated dominance &
block_index for the replacement of nir_intrinsic_rt_trace_ray.
We can still keep dominance/block_index metadata for the lowering of
nir_intrinsic_rt_execute_callable though.
This change uses 2 different lowering function with correct metadata
preservation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c78be5da30 ("intel/fs: lower ray query intrinsics")
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15910>
When IndirectParameterEnable==true it's not actually used by the hardware,
but if it's not initialized and INTEL_DEBUG=bat is set, then Valgrind complains.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15850>
The intel_perf_query path used for performance queries on GL was
passing a bogus "end" pointer to intel_perf_query_result_accumulate(),
causing it to accumulate garbage values. This was causing the values
of many performance counters to be corrupted.
The "end" pointer was incorrect because the current code was assuming
that different OA reports were located TOTAL_QUERY_DATA_SIZE bytes
apart, which is a hard-coded preprocessor define. However recent
(Gfx12+) hardware generations use a variable query size determined by
the query layout. Use the size derived from it instead, and remove
the stale define.
Fixes: 3c51325025 ("intel/perf: switch query code to use query layout")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15783>
This enables a lower power mode in the sampler hardware in certain
common scenarios. On Tigerlake, SAMPLER_MODE is not programmable by
userspace but the kernel already sets this bit for us.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15628>
While this register still exists, it's no longer a per-context register.
Instead, on Gfx12+, SAMPLER_MODE exists per dual-subslice and is
accessed as a "multicast" register, where you write control which
version is accessed by the "steering control register".
At any rate, userspace cannot write it any longer, and so there's not
much point to it existing in our genxml (which was missing most of the
fields anyway).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15628>
This allows the sampler to perform faster filtering of 8-bit UNORM
textures by filtering them at a different precision. The filtering
is intended to still be OpenGL and DirectX spec compliant.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15628>
It was originally introduced in ca791f5c but it was never actually set
anywhere. It doesn't serve any purpose other than some sanity checking
so let's clean it up for now.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15799>
DG2 can only do sample_d and sample_d_c on 1D and 2D surfaces. The
maximum number of gradient components and coordinate components should
be 2. In spite of this limitation, the Bspec lists a mysterious R
component before the min_lod, so the maximum coordinate components is 3.
Fixes the following Vulkan CTS failures on DG2:
dEQP-VK.glsl.texture_functions.texturegradclamp.isampler1d_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.isampler2d_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler1d_fixed_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler1d_float_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler2d_fixed_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler2d_float_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.usampler1d_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.usampler2d_fragment
The Fixes: tag below is a bit misleading. This commit fixes some test
cases similar to ones fixed by the Fixes: commit. I just want to make
sure this commit gets applied everywhere that commit was also applied.
Fixes: 635ed58e52 ("intel/compiler: Lower txd for 3D samplers on XeHP.")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15781>
Otherwise the driver setting interacts with it.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 939ddccb7a ("anv: Add support for depth bounds testing.")
Fixes: 1df871f8ff ("iris: Add support for depth bounds testing.")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15763>
Signed-off-by: Omar Akkila <omar.akkila@collabora.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15668>
These both require swizzling so border colors won't work. However,
they're conveniently in the list of formats for which custom border
colors require you to specify a format in the sampler. That list
constists of:
- VK_FORMAT_B4G4R4A4_UNORM_PACK16
- VK_FORMAT_B5G6R5_UNORM_PACK16
- VK_FORMAT_B5G5R5A1_UNORM_PACK16
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6226
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15624>
DG2 can only do sample_d and sample_d_c on 1D and 2D surfaces. Cube
maps and 3D surfaces were already handled, but 1D array and 2D array
surfaces were not.
Fixes the following Vulkan CTS failures on DG2:
dEQP-VK.glsl.texture_functions.texturegradclamp.isampler1darray_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.isampler2darray_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler1darray_fixed_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler1darray_float_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler2darray_fixed_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.sampler2darray_float_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.usampler1darray_fragment
dEQP-VK.glsl.texture_functions.texturegradclamp.usampler2darray_fragment
The Fixes: tag below is a bit misleading. This commit adds another
lowering, similar to the one in the Fixes: commit, that probably should
have been added at the same time. I just want to make sure this commit
gets applied everywhere that commit was also applied.
Fixes: 635ed58e52 ("intel/compiler: Lower txd for 3D samplers on XeHP.")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15681>
according to KHR_gl_texture_3D_image:
If <target> is EGL_GL_TEXTURE_3D_KHR, <buffer> must be the name of a
complete, nonzero, GL_TEXTURE_3D (or equivalent in GL extensions) target
texture object, cast
into the type EGLClientBuffer. <attr_list> should specify the mipmap
level (EGL_GL_TEXTURE_LEVEL_KHR) and z-offset (EGL_GL_TEXTURE_ZOFFSET_KHR)
which will be used as the EGLImage source; the specified mipmap level must
be part of <buffer>, and the specified z-offset must be smaller than the
depth of the specified mipmap level.
thus a 2d view of a 3d surface is not only legal, it's part of the spec and
must be supported when available
cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15584>
Now that we're using 3DSTATE_BINDING_TABLE_POOL_ALLOC to set the base
address for the binding table pool separately from surface states, we
don't actually need to update surface state base address anymore.
Instead, we can just set STATE_BASE_ADDRESS once at context creation,
and never bother updating it again, saving some heavyweight flushes
and freeing us from the need for address offsetting trickery.
This patch was originally written by Jason Ekstrand, with fixes from
Lionel Landwerlin, but was targeting Icelake. Doing it there requires
additional changes (15:5 -> 18:8 binding table pointer formats) which
also involve some trade-offs, whereas the XeHP change is purely a win,
so we'll do it here first.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15616>
You should probably resize the sources array before accessing entries
that might be out of bounds. inst->resize_sources() always allocates
enough space for at least 3 sources, so this is really only an issue
when there are 4+ sources.
Fixes: a920979d4f ("intel/fs: Use split sends for surface writes on gen9+")
Fixes: 4f86a70599 ("intel/fs: Lower DW untyped r/w messages to LSC when available")
Fixes: d372abe397 ("intel/fs: Add surface OWORD BLOCK opcodes")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15632>
