These checks were in Mesa prior to commit fbba25bba, but they were
not necessary for the purpose that Mesa intended (check if we could
resolve ReadPixels via memcpy), so that commit took them away.
Unfortunately, it seems that some Gallium drivers rely on these
checks to make the decision of whether they should fallback to Mesa's
implementation of ReadPixels correctly. Michel Dänzer reported that
the following piglit test would fail on radeonsi after commit
fbba25bba:
spec@ext_texture_integer@fbo_integer_readpixels_sint_uint
This patch puts the checks back in Gallium, where they are needed.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
In the immediate form, src2 == dst, so it does not need to be emitted.
Otherwise it overlaps with the immediate value's low bits.
Fixes: 09ee907266 (nv50/ir: Fold IMM into MAD)
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Prefer blit-based texture transfers only if the chip has dedicated VRAM
since it would translate to a copy into the same memory on shared-memory
chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Commit 4b249d2ee (mesa: Handle transferOps in texstore_rgba) introduced
proper transferops handling, but in updating the source to the newly
allocated temporary image neglected to reset the source packing. Set it
to the default which should be appropriate for the floats used.
Fixes: 4b249d2ee (mesa: Handle transferOps in texstore_rgba)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91173
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This is required on non-coherent architectures to ensure the value of
the fence is correct at all times. Failure to do this results in the
display freezing for a few seconds every now and then on Tegra.
The NOUVEAU_BO_COHERENT is a no-op for coherent architectures, so behavior
on x86 should not be affected by this patch.
Also bump the required libdrm version to 2.4.62, which introduced this
flag.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Although the horizontal and vertical alignment fields are ignored here,
0 is a reserved value for them and may cause undefined behavior. Change
the default value to an abitrary valid one.
v2: add comment about chosen value (Topi).
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Now that we can create builders with a bigger width than their parent as
long as it's exec_all, we don't need to create the instruction manually.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This assertion was meant to catch code inadvertently escaping the
control flow jail determined by the group of channel enable signals
selected by some caller, however it seems useful to be able to
increase the default execution size as long as force_writemask_all is
enabled, because force_writemask_all is an explicit indication that
there is no longer a one-to-one correspondence between channels and
SIMD components so the restriction doesn't apply.
In addition reorder the calls to fs_builder::group and ::exec_all in a
couple of places to make sure that we don't temporarily break this
invariant in the future for instructions with exec_size higher than
the dispatch width.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
We want to require different versions for nouveau and nouveau_vieux.
autoconf will only check for NOUVEAU once if both drivers are enabled,
meaning both version checks don't get executed. Rename the nouveau_vieux
one to NVVIEUX to avoid the issue.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Martin Peres <martin.peres@free.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Resource list can be created properly only after LinkShader hook
has been called to make sure all dead variables have been removed.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90925
This is required so that we can move resource list creation
to happen later.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Instead of using symbol table, build mask by inspecting IR. This
change is required by further patches to move resource list creation
to happen later when symbol table does not exist anymore.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
The current implementation only moves the joinAt when splitting after
the given instruction, not before it. So if you have a BB with
foo
instr
bar
joinat
and thus with joinAt set, we end up first splitting before instr, at
which point the instr's bb is updated to the new bb. Since that bb
doesn't have a joinAt set (despite containing one), when splitting after
the instr, there is nothing to copy over. Since the joinat will be in
the "split" bb irrespective of whether we're splitting before or after
the instruction, move it over in either case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91124
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
This adds support for ARB_gpu_shader_fp64 and ARB_vertex_attrib_64bit to
llvmpipe.
Two things that don't mix well are SoA and doubles, see
emit_fetch_double, and emit_store_double_chan in this.
I've also had to split emit_data.chan, to add src_chan,
which can be different for doubles.
It handles indirect double fetches from temps, inputs, constants
and immediates. It doesn't handle double stores to indirects,
however it appears the mesa/st doesn't currently emit these,
it always does UARL/MOV combos, which will work fine.
tested with piglit, no regressions, all the fp64 tests seem to pass.
v2:
switch to using shuffles for fetch/store (Roland)
assert on indirect double stores - mesa/st never emits these (it uses MOV)
fix indirect temp/input/constant/immediates (Roland)
typos/formatting fixes (Roland)
v2.1:
cleanup some long lines, emit_store_double_chan cleanups.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
As of now, the width field is no longer used for anything. The width field
"seemed like a good idea at the time" but is actually entirely redundant
with the instruction's execution size. Initially, it gave us the ability
to easily set the instructions execution size based entirely on register
widths. With the builder, we can easiliy set the sizes explicitly and the
width field doesn't have as much purpose. At this point, it's just
redundant information that can get out of sync so it really needs to go.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
There are a variety of places where we use dst.width / 8 to compute the
size of a single logical channel. Instead, we should be using exec_size.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Now that all of the non-explicit constructors are gone, we don't need to
guess anymore.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Previously we used dst.width but the two *should* be the same.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Previously, we were just depending on register widths to ensure that
various things were exec_size of 1 etc. Now, we do so explicitly using the
builder.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Shortly, offset() will depend on the builder so we need it moved to some
place where it has access to that.
Reviewed-by: Iago Toral Quiroga <itoral@igali.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Soon we will start using the builder to explicitly set all the execution
sizes. We could make a 32-wide builder, but the builder asserts that we
never grow it which is usually a reasonable assumption. Since this one
instruction is a bit of an odd-ball, we just set the exec_size explicitly.
v2: Explicitly new the fs_inst instead of using the builder and setting
exec_size after the fact.
v3: Set force_writemask_all with the builder instead of directly. The
builder over-writes it if we set it manually. Also, if we don't have
force_writemask_all in the builder it will assert-fail on SIMD32.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Previously, fs_inst::regs_read() fell back to depending on the register
width for the second source. This isn't really correct since it isn't a
SIMD8 value at all, but a SIMD4x2 value. This commit changes it to
explicitly be always one register.
v2: Use mlen for determining the number of registers read
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Previously, we were allocating the payload with different sizes per gen and
then figuring out the mlen in the generator based on gen. This meant,
among other things, that the higher level passes knew nothing about it.
Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes things a little simpler, more efficient, and quite a bit more
readable.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
