Copies/fills/updates for buffers are happening through CCU but need
additional synchronization when write range is not aligned to 64 bytes.
Because dst buffer access uses either R8_UNORM or R32_UINT and they are not
coherent between each other in CCU since format seem to be a part of a
cache key.
See: https://gitlab.khronos.org/vulkan/vulkan/-/issues/3306
The synchronization with writes from UCHE (e.g. with SSBO stores) are
solved by the fact that UCHE has byte level dirtiness tracking and that CCU
flush would happen always before UCHE flush for such case (e.g. both
renderpass and dispatch would flush pending CCU write).
Additionally see:
https://gitlab.khronos.org/vulkan/vulkan/-/issues/3398#note_400111
Fixes geometry corruption and potentially hangs in Resident Evil 3.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28469>
There are more things to do, e.g. BV mempool dumping and estimating the
BV location. However this is a good start.
The expanded register size is because the reglist includes registers
from other cores and these are read the same as any other GPU register.
Note that this is also the actual range of type4 packets, even though
registers higher than 0xffff are all protected. Right now these are
skipped on page faults but still read with the crashdumper for hangs.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27266>
Allocations targeting a pan_kmod_dev can happen concurrently, so we
need the pan_kmod_dev allocator to be thread-safe.
ralloc() is not thread-safe, and we don't really need a hierarchical
allocator in this context anyway, so let's just switch to calloc/free
instead.
Fixes: d95ec56f8c ("panfrost: Abstract kernel driver operations")
Reported-by: Eric Smith <eric.smith@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Eric Smith <eric.smith@collabora.com>
Reviewed-by: Eric Smith <eric.smith@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28926>
Make sure we release the syncobj attached to the BO if the object is
sharable.
Fixes: 97f6a62f7e ("pan/kmod: Add a backend for panthor")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Constantine Shablia <constantine.shablya@collabora.com>
Reviewed-by: Antonino Maniscalco <antonino.maniscalco@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28926>
On pre-Valhall HW, the fragment shader metadata was part of the RSD
(renderer state descriptor), which was emitted at draw time, but
Valhall introduces a shader program descriptor containing only the
shader information, and this one is emitted at shader preparation
time.
If we don't add the FS state BO to batch, we might end up with a batch
being executed after the shader object has been destroyed, leading to
page faults when the GPU tries to access the shader program descriptor.
We make the panfrost_batch_add_bo() unconditional since it gracefully
handles the NULL case (which will happen on v7-).
Fixes: 087b63cb07 ("panfrost: Allow uploading fragment SPDs")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Antonino Maniscalco <antonino.maniscalco@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28926>
Some CI people proposed to split the label for the expectation files in
issue #10965. The proposal also thought to label as `trace` changes on the
configuration files for those tests.
Signed-off-by: Sergi Blanch Torne <sergi.blanch.torne@collabora.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29016>
Remove the GPDP and GPDP2 entrypoints, and fill the properties
at device initialization time instead.
Move DRM master major/minor gathering before get_properties() and WSI
init, as the latter uses the results gathered by the former.
Reviewed-by: Julia Tatz <tatz.j@northeastern.edu>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27717>
The runtime grew support for VkPhysicalDevicePresentationPropertiesANDROID,
so we can use that now and get rid of anv_GetPhysicalDeviceProperties2.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27717>
For CMP/CMPN, use src0 type if destination is null otherwise get the
src0 type register with destination register size.
This fixes dEQP-VK.glsl.builtin_var.frontfacing.* tests cases on Xe2+.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28679>
During etna_assemble(..) we check if the uniform usage is valid for
the target GPU. As we do not fully init the srcs, it can happen that
we look at random data during the uniform check. This generates
false positive "generating instruction that accesses two different uniforms"
errors.
Fixes: 5aede1a157 ("etnaviv: isa: Do src swizzle with isaspec")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29048>
Add performance counting support for a7xx in Freedreno, providing the
available performance counter groups along with the lists of countables
that can be counted through related counters.
All the collected countable names and values are provided in enum
definitions, even when the names indicate some countables being reserved.
The perfcounter groups don't include those reserved values.
The countable selection command stream in fdperf is enabled for a7xx,
sharing the same command stream created for 5th- and 6th-gen devices.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
Instead of the ratio of counter value change in a certain sampling window,
display the raw integer change of that counter value. Counters counting
countables with names indicating cycle values still have that ratio
computed and printed alongside the raw value.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
The counter values on Adreno are 64-bit values, but only their lower
32 bits have been read until now.
This change switches to reading the complete 64-bit value, storing that
value and the delta against the previous value for each counter. Similar is
done for time values, namely storing the time value and the delta against
the previous value (in microseconds) for each counter. The deltas are then
used to compute the counter change per second, as was done before.
In curses UI, an early sampling is done during setup in order to avoid
artificially-large values popping up in the first update due to the deltas
being calculated to initially-zero values.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
fdperf reserves the first CP counter for measuring the GPU frequency.
A new flag is added to the fdperf's counter struct type, the flag being
enabled for the first CP counter during counter setup.
Different tests on group and counter indices are replaced by testing for
this flag's value. Only exception is the restore_counter_groups()
functionality, where now this reserved CP counter is also reselected with
the persistent CP_ALWAYS_COUNT countable value, in case some other program
overrides it.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
Right now select_counter() is called with values of specific countables
that should be tracked in the given counter, but it treats those values
as indices into the array of all available countables for a given counter
group. This works right now since all countable values for any counter
group are sequential, but that won't be the case on a7xx.
To address that, select_counter() is adjusted to find the index of the
specified countable value, and use that to store the label pointer that
should be displayed for the desired counter.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
Use on-stack string buffers and snprintf to compose formatted output in
fdperf. This removes a couple of current compiler warnings due to unused
asprintf return values.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27483>
Currently ffmpeg has a bug in VAAPI AV1 decode that in some cases
it submits the same slice data buffer as many times as there is tiles.
However, in other cases it behaves correctly and all slice data buffers
contain different parts of bitstream to decode which this change breaks.
Now that the va frontend is passing correct offsets, this fixes decoding
AV1-TEST-VECTORS/av1-1-b8-22-svc-L1T2 with ffmpeg.
This reverts commit e6701f7231.
Cc: mesa-stable
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28960>
The slice parameter data offset refers to offset in the submitted data buffer.
When multiple slice data buffers are submitted, the offsets of all slices needs
to be adjusted to be based from the start of the first data buffer.
Cc: mesa-stable
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28960>
It's legal in SPIRV for functions to not have names, we have to take this
into account when calling into strcmp here.
Fixes: 2aa9eb497d ("nir: Add a helper for finding a function by name")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29063>
Indeed, clover was processing the pipe_box elements with a hardcoded
order. The update of the pipe_box object broke clover.
Fixes: 651191801a ("gallium: increase the size of pipe_box y, height fields to allow bigger textures")
Signed-off-by: Patrick Lerda <patrick9876@free.fr>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29060>
