There was a chance for brw_wm_emit.c to screw up and pass (1 << 4) instead of
1, which would get converted to 0 when stored. Instead, use stdbool which
converts nonzero to true/1 like we want.
Otherwise, conditional rendering always takes the fallthrough "render it
anyway" case unless the application had itself done a check or wait on the
query.
Fixes intel oglconform's conditional_render advanced.nofbo.readpixels.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
I happened to notice this while looking at a blit pass in l4d2, which had an
optional push/pop around framebuffer srgb setting. It didn't matter in the
end, but the fix is sitting in my tree now.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
You can't practically have desktop OpenGL and OpenGL ES on the same system
without this. The benefits of not having it (e.g., a more compact dispatch
table) are irrelevant.
v2: Don't mark shared-glapi as experimental. Review suggestion by Chad.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
These are largely based on the src/mapi/glapi/tests. However,
shared-glapi provides less external visibility into the dispatch table,
so there is less to test. Also, shared-glapi does not implement
_glapi_get_proc_name, so that test was removed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
When --enable-shared-glapi is used, all non-ABI entries in the table are
lies. Avoiding the use of glapitable.h avoids the lies. The only
entries used in this code are entries that are ABI. For these, the ABI
offset can be used directly.
Since this code is in src/glx, it can't use src/mesa/main/dispatch.h to
get the pretty names for these offsets.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
When --enable-shared-glapi is used, all non-ABI entries in the table are
lies. There are two completely separate code generation paths used to
assign dispatch offset. Neither has any clue about the other.
Unsurprisingly, the can't agree on what offsets to assign.
This adds a bunch of overhead to __glXNewIndirectAPI, but this function
is called at most once.
The test ExtensionNopDispatch was removed. There was just no way to
make this test work with the information provided in shared-glapi.
Since indirect_glx.c uses _glapi_get_proc_offset now, it was also
impossible to make the tests work without shared-glapi. So much pain.
This fixes indirect rendering with shared-glapi.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
This fixes 'make check' on with --enable-shared-glapi. This test cannot work
in that environment.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
The hardware seems to use the length of the PIPE_CONTROL command to
indicate whether the write is 64-bits or 32-bits. Which makes sense
for immediate writes.
Daniel discovered this by writing a pattern into the query object bo
and noticing that the high 32-bits were left intact, even on those
pipe control writes that seemingly worked.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
This consolidates the complexity in one place, which is important
because it's about to get even more complicated.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
This implements one of the Sandybridge PIPE_CONTROL workarounds. It
doesn't appear to be required for Ivybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
The hardware seems to use the length of the PIPE_CONTROL command to
indicate whether the write is 64-bits or 32-bits. Which makes sense
for immediate writes.
Daniel discovered this by writing a pattern into the query object bo
and noticing that the high 32-bits were left intact, even on those
pipe control writes that seemingly worked.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
This consolidates the complexity in one place, which is important
because it's about to get even more complicated.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
PIPE_CONTROL has variable length, depending upon generation and whether
we want to do 32-bit or 64-bit data writes. Make it explicit, rather
than hiding a length of 4 in the #define for _3DSTATE_PIPE_CONTROL.
Generated by s/3DSTATE_PIPE_CONTROL/3DSTATE_PIPE_CONTROL | (4 - 2)/g.
This is equivalent since the #define used to have | 2 in it. A grep
through the sources shows that all instances have been converted, so
it's safe to remove the | 2 from the #define.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fix a stupid typo that could lead to memory
leaks and/or segfaults.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Move releasing the VM area after closing the bo handle.
This partially fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45018
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Unlike the FS side in the previous commit, this does variable indexing just
fine, using the same code as we used for other variable-indexed pull
constants.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Variable array indexing isn't finished, because the lowering pass
turns it all into conditional moves of constant index accesses so I
can't test it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I wanted to add the surface index as a variable value for UBO support,
and a reg seemed like the obvious way to go. This exposes more of the
information to CSE, which we'll probably want to apply to pull
constant loads for UBOs eventually (you might access 4 floats in a
row, each of which would produce an oword block read of the same
block).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes piglit GL_ARB_uniform_buffer_object/dlist.
v2: Use the .ui fields instead of .i for type consistency (review by Brian
Paul)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The ARB spec lets you get away with the default block counting against the
blocks for combined size limits. The core spec says you need to be able to
support the maximum size of default block *and* the maximum size of each
uniform block. I see no reason that any driver would have a problem with
that.
Fixes gl 3.1/minmax (with an associated fix to the test)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were only propagating it to the API when the variable was a matrix type,
but we were still tripping over it in lower_ubo_reference when it was set on a
vector.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were getting the base offset of a vec2, not of a vec2[2] like the quoted
spec text says we should.
v2: Fix swapped then/else cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we were returning the index into the UniformBlocks of one of the
linked shaders, when it's supposed to be the program global index.
Fixes piglit getactiveuniformsiv-uniform_block_index.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In between glGenBuffers() and glBindBuffer(), the buffer object points to this
dummy buffer with a name of 0, and a glBindBufferBase() would point to that.
It seems pretty clear, given that glBindBufferBase() only cares about the
current size of the buffer at render time, that it should bind up the buffer
that you passed in instead of pointing it at this useless dummy buffer.
However, what should glBindBufferRange() do? As of this patch, it will
promote the genned buffer to a proper buffer like it had been
glBindBuffer()ed, and then detect that the size is greater than the buffer's
current size of 0 and throw INVALID_VALUE. It seems like the most reasonable
answer here.
Note that this also changes the behavior of these two on non-glGenBuffers() bo
names. We haven't yet set up the error throwing for glBindBuffers() on gl
3.1+, and my assumption is that these two functions should inherit their
behavior on un-genned names from glBindBuffers().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Reduce the impenetrable code in emit_ubo_loads() by 23 lines by keeping
the ir_variable as the variable part of the offset from handle_rvalue(),
and track the constant offsets from that with a plain old integer value,
avoiding a bunch of temporary variables in the array and struct handling.
Also, fix file description doxygen.
v3: Fix a row vs col typo, and fix spelling in a comment.
Reviewed-by: Eric Anholt <eric@anholt.net>
For the UBO lowering pass, I want to see the whole dereference chain for
replacing, not the innermost ir_dereference_variable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Drivers will probably want to be able to take UBO references in a
shader like:
uniform ubo1 {
float a;
float b;
float c;
float d;
}
void main() {
gl_FragColor = vec4(a, b, c, d);
}
and generate a single aligned vec4 load out of the UBO. For intel,
this involves recognizing the shared offset of the aligned loads and
CSEing them out. Obviously that involves breaking things down to
loads from an offset from a particular UBO first. Thus, the driver
doesn't want to see
variable_ref(ir_variable("a")),
and even more so does it not want to see
array_ref(record_ref(variable_ref(ir_variable("a")),
"field1"), variable_ref(ir_variable("i"))).
where a.field1[i] is a row_major matrix.
Instead, we're going to make a lowering pass to break UBO references
down to expressions that are obvious to codegen, and amenable to
merging through CSE.
v2: Fix some partial thoughts in the ir_binop comment (review by Kenneth)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When converting var->location from pointing at the program's UniformBlocks to
pointing at the linked shader's UniformBlocks, I missed this change. It
usually worked out in the end because the two lists happen to be the same in
many testcases.
Fixes a valgrind complaint on
oglconform ubo-compile.cpp advanced.std140.2stage
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As we get into supporting GL 3.x core, we come across more and more features
of the API that depend on the version number as opposed to just the extension
list. This will let us more sanely do version checks than "(VersionMajor == 3
&& VersionMinor >= 2) || VersionMajor >= 4".
v2: Fix a bad <= 30 check.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This turns on window system MSAA.
This patch changes the id of many GLX visuals and configs, but that
couldn't be prevented. I attempted to preserve the id's of extant configs
by appending the multisample configs to the end of the extant ones. But
somewhere, perhaps in the X server, the configs are reordered with
multisample configs interspersed among the singlesample ones.
Test results:
Tested with xonotic and `glxgears -samples 1` on Ivybridge.
No piglit regressions on Ivybridge.
On Sandybridge, passes 68/70 of oglconform's
winsys multisample tests. The two failing tests are:
multisample(advanced.pixelmap.depth)
multisample(advanced.pixelmap.depthCopyPixels)
These tests hang the gpu (on kernel 3.4.6) due to
a glDrawPixels/glReadPixels pair on an MSAA depth buffer. I don't expect
realworld apps to do that, so I'm not too concerned about the hang.
On Ivybridge, passes 69/70. The failing case is
multisample(advanced.line.changeWidth).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
