Now that we're running the drivers we build, building with
optimization is important for keeping our runtime down. Shaves about
4 minutes of runtime off of GLES2 CTS of llvmpipe at 64x64.
v2: Only switch meson-main until we enable CTS for other builds
on request by Michel.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
If we don't set DESTDIR, then the DEFAULT_DRIVER_DIR built into the
libraries is correct and we don't need to use LIBGL_DRIVERS_PATH and
friends for CI usage. Incidentally, this moves our installed paths
from /builds/anholt/mesa/install/usr/local/lib (for example) to
/builds/anholt/mesa/install/lib for simplicity.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
If we're hitting the swrast fallback path here, it's probably because
we stumbled across a KMS-only device (such as the ASpeed that some of
our CI runners have) that will then return a NULL driver_name. Don't
crash in that case.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We get a getDrawableInfo() call in the MakeCurrent path, which
platform_device was handling correctly by returning the pbuffer's
width/height but platform_surfaceless segfaulted for. Reuse
platform_device's implementation.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
I want to enable CI of llvmpipe out of the meson-main build. So, kick
classic swrast/osmesa to meson-i386, then promote llvmpipe to
meson-main (along with nine, now that classic osmesa isn't keeping it
out of there).
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Midgard has no hardware support for transform feedback, so we simulate
it in software. Lucky us.
What Midgard does do is write out vertex shader outputs to main memory
unconditonally. Fragment shaders read varyings back from main memory;
there's no on-chip storage for varyings. Whether this was a reasonable
design is a question I will not be engaging in this commit message.
What that does mean is that, in some sense, Midgard *always* does
transform feedback uncondtionally, and there's no way to turn off
transform feedback. Normally, we would allocate some scratch memory
every frame to store the varyings in an arbitrary format (interleaved
for simplicity), and then feed that scratch to the fragment shader and
discard when the rendering completes.
The only difference now is that sometimes, for some buffers, we use a BO
provided to us by Gallium and a format provided by Gallium, instead of
allocating the memory and choosing the format ourselves. This has some
limitations -- in particular, it only works at vec4 granularity, so a
corresponding GLSL linkage patch is needed to correctly implement
transform feedback for non-vec4 types. Nevertheless, given the hardware
already works in this admittedly-bizarre fashion, transform feedback is
"free". Or, at least, it's no more expensive than any other rendering.
Specifically not implemented is dynamically-sized transform feedback
(i.e. with geometry/tesselation shaders).
Spoiler alert: Midgard has no support for geometry *or* tessellation
shaders, despite advertising support. They get compiled to *massive*
compute shaders. How's that for checkbox compliance?
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
We have to maintain the internal offset ourselves. Per v3d.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
We could probably get away with doing this once per pipe_shader_state
but let's not jump down that rabbit hole quite yet.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
It's there in shader_info, but we need to access it from pan_context.c
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
We'll need this in a moment. Ken's implementation, lightly edited for
Panfrost.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
This is a huge hack to workaround incomplete BO flushing logic, but it's
enough for the dEQP transform feedback tests, and doing the resource
management to get this right is out-of-scope for this patch series.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
It doesn't really make sense, since we don't have special texture
coordinate varyings, but it'll make some code simpler for XFB and it
doesn't hurt us, even if I lose a bit of my soul setting it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN should now be handled.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
We're just going to compute them in the driver but let's get the
structures setup to handle them. Implementation from v3d.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
If driver-params are required, we really should emit it on every draw
for correctness. And if not required, we should emit a DISABLE so that
un-applied state updates from previous draws don't corrupt the const
state.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Which takes ownership of the stateobj. Useful for streaming state-
objs, to avoid an extra ref/unref
Worth ~5% at gl_driver2
Signed-off-by: Rob Clark <robdclark@chromium.org>
Should be no functional change. Next step is to re-arrange various
const state into different stateobjs.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hoist them out of code-paths that will eventually be called directly for
various a6xx+ const related stateobjs.
This ends up duplicating one constlen check in ir3_emit_vs_consts(), to
avoid what could otherwise be an unnecessary WFI on older gens.
Signed-off-by: Rob Clark <robdclark@chromium.org>
These don't need to be in context, and we'll need them in screen in a
later patch. Plus it's a good cleanup.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move DP emit to it's own function. No functional change, just code
motion to prepare for splitting up const state into multiple state-
objs on a6xx.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Implement ->set_damage_region() region to support partial updates.
This is a dummy implementation in that it does not try to merge
damage rects. It also does not deal with distinct regions and instead
pick the largest quad as the only damage rect and generate up to 4
reload rects out of it (the left/right/top/bottom regions surrounding
the biggest damage rect).
We also do not try to reduce the number of draws by passing all quad
vertices to the blit request (would require extending u_blitter)
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Add a pipe_screen->set_damage_region() hook to propagate
set-damage-region requests to the driver, it's then up to the driver to
decide what to do with this piece of information.
If the hook is left unassigned, the buffer-damage extension is
considered unsupported.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Use the DRI2 interface callback to pass the damage rects to
the driver.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add a new DRI2_BufferDamage interface to support the
EGL_KHR_partial_update extension, informing the driver of an overriding
scissor region for a particular drawable.
Based on a commit originally authored by:
Harish Krupo <harish.krupo.kps@intel.com>
renamed extension, retargeted at DRI drawable instead of context,
rewritten description
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The intension of the KHR_partial_update was not to send the damage back
to the platform but to send the damage to the driver to ensure that the
following rendering could be restricted to those regions.
This patch removes the set_damage_region from the egl_dri vtbl and all
the platfrom_*.c files.
Then upcomming patches add a new dri2 interface for the drivers to
implement
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This refactor will let us more easily use
pipe_screen::resource_get_param as an alternative to
pipe_screen::resource_get_handle.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
