Flat SHADE_MODEL still overrides any non-flat interpolation
qualifier, but pulling that state out of the rasterizer cso
isn't really worth the effort, is it ?
NOTE: This is a candidate for the 8.0 branch.
Needed to implement the Map/UnmapRenderbuffer() driver hooks.
This fixes glRead/Draw/CopyPixels, etc.
See https://bugs.freedesktop.org/show_bug.cgi?id=44723
Note: This is a candidate for the 8.0 branch.
Tested-by: Kevin Hobbs <hobbsk@ohiou.edu>
This fixes accum buffer operations. The accumulation buffer is the
only malloc-based renderbuffer for the intel drivers.
v2: apply x/y offset to returned pointer
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes piglit EXT_framebuffer_multisample/negative-copypixels.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample/negative-copyteximage.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample-negative-readpixels.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample/renderbuffer-samples.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Previously, we were saying that everything from the starting tile to
region width+height was part of the limits of our depthbuffer, even if
the tile was near the bottom of the depthbuffer. This mean that our
range was not clipping to buffer buonds if the start tile was anything
but the start of the buffer.
In bebc91f0f3, this was changed to
saying that we're just rendering to a region of the size of the
renderbuffer. This is great -- we get a range that should actually
match what we want. However, the hardware's range checking occurs
after the X/Y offset addition, so we were clipping out rendering to
small depth mip levels when an X/Y offset was present. Just add
tile_x/y to the width in that case -- the WM won't produce negative
x/y values pre-offset, so we just need to get the left/bottom sides of
the region to cover our buffer.
Fixes the following Piglit regressions on gen7:
spec/ARB_depth_buffer_float/fbo-clear-formats
spec/ARB_depth_texture/fbo-clear-formats
spec/EXT_packed_depth_stencil/fbo-clear-formats
NOTE: This is a candidate for the 8.0 branch.
The array holds GLuint values so remove the float cast.
Note, however, that to compute the average of four GLuints we really
want to do (a+b+c+d)/4 but that could overflow. This change doesn't
address that for now.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
In the first case, the newImage[] array contains GLuint values.
In the second case, the parameter type is GLuint, but the maxDepth
value is never used in this case (GL_FLOAT_32_UNSIGNED_INT_24_8_REV).
Pass ~OU just to be safe.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
We include both imports.h and u_math.h in the state tracker. This
leads to multiple, conflicting definitions of ffs() with MSVC.
Use FFS_DEFINED to skip the ffs() in u_math.h.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
include mesa headers before gallium headers to avoid problem with
ffs() being defined in u_math.h and then again in imports.h
The next commit will add some #ifdefs to prevent multiple definitions
of ffs().
Call ffs() and ffsll() everywhere. Define our own ffs(), ffsll()
functions when the platform doesn't have them.
v2: remove #ifdef _WIN32, __IBMC__, __IBMCPP_ tests inside ffs()
implementation. The #else clause was recursive.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Alexander von Gluck <kallisti5@unixzen.com>
Some hardware versions rely on it to render correctly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Introduce vbo_get_minmax_indices() function to handle the min/max index
computation for nr_prims(>= 1). The old code just compute the first
prim's min/max index; this would results an error rendering if user
called functions like glMultiDrawElements(). This patch servers as
fixing this issue.
As when nr_prims = 1, we can pass 1 to paramter nr_prims, thus I made
vbo_get_minmax_index() static.
v2: per Roland's suggestion, put the indices address compuation into
vbo_get_minmax_index() instead.
Also do comination if possible to reduce map/unmap count
v3: per Brian's suggestion, use a pointer for start_prim to avoid
structure copy per loop.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
glDrawBuffer(GL_FRONT_AND_BACK) results in to segmentation fault if
intel->is_front_buffer_rendering is not enabled with GL_FRONT_AND_BACK.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44153
Reported-by: Yi Sun <yi.sun@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead, do the uniform setting and input / output mapping directly in
brw_link_shader. Hurray for not generating Mesa IR! However, once
the i965 driver stops calling _mesa_ir_link_shader, UsesClipDistance
and UsesKill are no longer set.
Ideally gen6_upload_vs_push_constants should use the
gl_shader_program, but I don't see a way to propagate the information
there. The other alternative, since this is the only usage, is to
move gl_vertex_program::UsesClipDistance to brw_vertex_program.
The compile (and precompile) stages use UsesKill to determine the
cache key for the shader. This is then used to determine whether or
not to compile the shader. Calculating this data during compilation
is too late.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
This previously enabled some optimizations in the fragment shader
(interpolation, etc.) if some input components were always 0.0 or
1.0. However, this data was generated by analyzing Mesa IR. The
next patch in this series removes generation of Mesa IR for GLSL
paths. When we detect that case, just set the used mask to ~0 and
circumvent the optimizations.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It used to be done in ir_to_mesa, and that was kind of a bad place.
I didn't change st_glsl_to_tgsi because there is some strange stuff
happening in the code that generates glDrawPixels shaders. It looked
like this would break horribly if I touched anything.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Track the calculated data in gl_shader_program instead of the
individual assembly shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Rather than looking at the settings in individual assembly programs,
look at the settings in the top-level uniform values. The old code
was flawed because examining each shader stage in isolation could
allow inconsitent usage across stages (e.g., bind unit 0 to a
sampler2D in the vertex shader and sampler1DShadow in the fragment
shader).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
