We will need these to implement GLSL's interpolateAt*() functions where
we are required to perform interpolation in the shader at arbitrary
offsets.
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7155>
Some shaders that need to spill hundreds of registers can take very long times
to compile as each allocation attempt spills a single register and restarts
the allocation process. We can significantly cut down these times if we allow
the compiler to spill in batches, which should be possible if we are spilling
uniforms, which is in fact the kind of spills that we do first because they
have lower cost than TMU spills.
Doing this could cause us to slightly over spill in some cases (depending on
the chosen batch size) leading to slightly worse performance, so we only
enable this behavior after we have started to spill over a certain threshold,
at which point we assume that performance won't be good and we want to
favor compilation speed instead.
v2:
- Keep it simple and just try to spill a fixed amount of registers in a
batch instead of trying to compute this dynamically based on accumulated
spills and current register pressure. (Eric).
v3:
- Check if the node is valid before doing anything with it.
- Drop the environment variable to select batch size and just fix it to 20.
With this we can take this CTS test from 35 minutes down to about 3 minutes:
dEQP-VK.ssbo.layout.random.all_shared_buffer.5
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Although we don't support texture buffers on the OpenGL driver, we are
already doing that for the Vulkan driver. This would be needed for the
OpenGL driver in any case.
Fixes following tests on v3dv:
dEQP-VK.memory.pipeline_barrier.host_write_uniform_texel_buffer.*
dEQP-VK.memory.pipeline_barrier.transfer_dst_uniform_texel_buffer.*
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
For example, regarding gl_SampleID, the GLSL spec states:
"Any static use of this variable in a fragment shader causes the
entire shader to be evaluated per-sample."
So we need to track if the fragment shader does anything that implicitly
enables per-sample shading in the compiler for the driver to
auto-enable sample rate shading if needed.
v2:
- Instead of tracking reads of gl_SampleID, check SYSTEM_BIT_SAMPLE_ID
and SYSTEM_BIT_SAMPLE_POS as well as the sample layout qualifier like
other drivers are doing to activate this behavior (Eric).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This is intended to return the sample location within the pixel.
Fixes:
dEQP-VK.pipeline.multisample_shader_builtin.sample_position.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We didn't need this until now, since this was included with GLES 3.2,
but we need it for Vulkan.
Eric had already done the plumbing for it though, we just need to
actually emit the mask.
Fixes some tests in:
dEQP-VK.renderpass.suballocation.multisample_resolve.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We will need this in Vulkan to support vertex format
VK_FORMAT_B8G8R8A8_UNORM. The hardware doesn't allow to swizzle
vertex attribute components, so we need to do it in the shader.
v2:
- Use nir_intrinsic_io_semantics() to retrieve the location instead
of looping through the shader input variables (Eric).
- Assert that we only have one component (Eric).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
So far we were not asking the driver for the sampler state if we could
just use the default P1 values. But even if we need to fill P1 (for
example to fill up the output type of the format), if the texture
operation doesn't need a sampler, we can let that field as NULL (so
default values) and avoid calling back the driver for a sampler.
This is not mandatory for OpenGL (as we always have a sampler object),
although still a good to have. For Vulkan this is needed, as we don't
have a sampler object in that case.
v2: reword comment (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Vulkan lowers gl_InstanceIndex to load_base_instance +
load_instance_id, so we need to implement loading the base instance in
the compiler.
The base instance is set by the BASE_VERTEX_BASE_INSTANCE command
right before the instanced draw call and it is included in the VPM
payload together with the InstanceID and VertexID if this is requested
by the shader record.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
In order to take into account the vulkan specific system values
SYSTEM_VALUE_INSTANCE_INDEX and SYSTEM_VALUE_VERTEX_ID_ZERO_BASE.
Reviewed-by: Iago Toral <itoral@igalia.com>
Reviewed-by: Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We would need on OpenGL to update values for all the textures used. On
OpenGL that value can be always took from the context or the nir
shader, but there are cases on Vulkan that it is not the case, or
would force up to recompute it.
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
To ask to debug a registr allocation failure
(V3D_DEBUG_REGISTER_ALLOCATION seemed too long to me).
When a fallback register allocation algorithm was added, if the
register allocation fails, it only dumpg the current vir with the
register pressure info with the failed fallback. But if we want do
debug the problem, we would be interested on both.
Additionally, it was strange that we got the full vir dump with the
failure even if no debug option was set.
Additionally we add shaderdb like stats for those failures, to make
easier to compare one and the other.
v2: keep a small warning message in case both register allocation
algorithms fails (Neil)
Reviewed-by: Neil Roberts <nroberts@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6999>
We're about to introduce conversion ops which are going to want two
different types. We may as well just split the one we have rather than
end up with three. There are a couple places where this is mildly
inconvenient but most of the time I find it to actually be nicer.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
This reverts commit 939ddf3f67.
Intel has a separate pass for fusing FFMAs selectively. We split
these flags in commit 1b72c31e1f and
the reasoning still stands. The patch being reverted was just a
cleanup, so there should be no issue with reverting it.
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6849>
This makes it explicit that this intrinsic is only for SSBOs. For the
v3dv driver, we'll be adding a get_ubo_size intrinsic and we want to be
able to distinguish between the two.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6812>
Pre-V3D 4.3 hardware has a quirk where it expects XY coordinates in
.8 fixed-point format, but then it will internally round it to .6 fixed-point,
introducing a double rounding. The double rounding can cause very slight
differences in triangle raterization coverage that can actually be noticed by
some CTS tests.
The correct fix for this as recommended by Broadcom is to convert to
.8 fixed-point with ffloor().
Fixes:
dEQP-VK.renderpass.suballocation.subpass_dependencies.late_fragment_tests.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6677>
This also fixes the inverted last parameter of nir_lower_flrp in most drivers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6599>
For several schedule restrictions, we are checking if the instruction
is using the vpm. So far it was implemented as being a read or a write
of the vpm. But VPM wait (vpmwt) is not a read or a write (it is a
wait until all pending writes finishes). This is relevant to implement
peripheral accesses restrictions, as for some cases where vpm
read|writes are allowed, vpmwt is not.
Fixes:
dEQP-VK.binding_model.descriptorset_random.sets8.constant.ubolimitlow.sbolimitlow.sampledimglow.outimgtexlow.noiub.nouab.vert.noia.0
On the sim, as it was raising an assert for wrong peripheral access.
v2: simplify v3d_qpu_waits_vpm (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6498>
If no options are provided, existing intrinsics are used.
If the lowering pass indicates there should be offsets used for global
invocation ID or work group ID, then those instructions are lowered to
include the offset.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>
The actual variable -> intrinsic lowering stays where it is, but
ops which convert one intrinsic to be implemented in terms of
another have moved.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>
It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
The OpenCL image_width/height/depth functions have variants which can
take an LOD parameter. More importantly, LLVM-SPIRV-Translator always
generates OpImageQuerySizeLod even if the LOD is guaranteed to be zero.
Given that over half the hardware out there has an LOD field for image
size queries (based on a rudimentary scan through their NIR -> whatever
code), we may as well just add the source to the NIR intrinsic. If this
is ever a problem for anyone, the lowering is pretty trivial.
I've also added asserts to everyone's drivers that should alert them if
they ever see an LOD other than zero. This will never happen with GL or
Vulkan so there's no need for panic.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6396>
Helper invocations need to be able to read from UBOs since those values
can be used for flow control, but writes from helper invocations need to
be dropped.
Fixes CTS tests:
dEQP-VK.glsl.derivate.*.uniform_loop.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>
The nir_lower_io pass produces a bunch of constant arithmetic, and
assumes that constant folding will simplify it away.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>
This adds support for the intrinsic as well as the vir_SAMPID
instruction that corresponds to it in vir.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>
This one's a bit more complex because it filters off only those
variables with mode == nir_var_uniform. As such, it's not exactly a
drop-in replacement for nir_foreach_variable(var, &nir->uniforms).
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Vulkan allows fragment shaders to read gl_ClipDistance[], in which case
the SPIR-V compiler will inject a compact array variable at
VARYING_SLOT_CLIP_DIST0. Request the lowering to always work in terms
of a compact array variable so we don't have to care about the API
in use.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6022>
We are going to need this in Vulkan because the SPIR-V compiler
defines clip distances as a single compact array of scalars, so
our compiler needs to know what to do with them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6022>
v3d_compile is now split out into a helper function that gets called a
second time if compilation fails the first time with the result
reporting the register allocation failed. The second time it is run with
the fallback scheduler to try and increase the chances of successfully
allocating the registers.
v2: Add a performance debug message when using the fallback scheduler.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
Instead of just having a bool status for the failure, there is now an
enum so that the compilation can report a more detailed status.
Currently this is only used to report whether the failure was due to
failed register allocation. The “failed” bool doesn’t seem to actually
have been used anywhere so this doesn’t really change a lot.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
The input primitive ID is read from the VPM in the same memory segment
as the outputs. This means that writing the GS header to VPM location 0
needs to be done after reading the primitive ID. This patch adds a
dependency between the load_primitive_id intrinsic and the store_output
intrinsic for location 0 to stop the scheduler from reordering them.
v2: Use an enum for the dependency class number.
v3: Add "GS" to the class enum name.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
nir_schedule already has a struct for options which makes it more than
just a function declaration. Later patches intend to add more structs to
complement these options. In order to make the code easier to manage,
this moves the nir_scheduler-related parts out of nir.h to their own
header.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
This is needed for handling drivers that use an input for loading the
face, for example Panfrost with Midgard GPUs.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Tested-by: Urja Rannikko <urjaman@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5915>
When generating the VPM write instruction for geometry shader outputs,
emit_store_output_gs ends up adding the base and offset arguments
together with an ADD instruction. The addition was done at the VIR level
after scheduling so it always ends up right next to the corresponding
stvpm instruction. Most of the time the offset is constant but nothing
does any constant folding at the VIR level.
This patch makes it instead fold the addition into the offset at the NIR
level in v3d_nir_lower_io so that the NIR-level constant folding can get
rid of the addition most of the time.
v2: Use nir_iadd_imm to simplify the code. (Eric Anholt)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5825>
ntq_setup_fs_inputs and ntq_setup_gs_inputs sort the inputs according to
the driver location. This input array is then used to calculate the VPM
offset for the outputs in the previous stage. However, it wasn’t taking
into account variables that are packed into a single varying slot. In
that case they would have the same driver_location and are
distinguished by location_frac.
This patch makes it additionally sort by location_frac when the driver
locations are equal. This can happen when the compiler packs varyings
that are sized less than vec4. Without this fix, when the VPM is used to
transmit data free-form between the stages (such as VS->GS) then it
would end up writing to inconsistent locations.
Fixes dEQP tests such as:
dEQP-GLES31.functional.primitive_bounding_box.lines.global_state.
vertex_geometry_fragment.default_framebuffer_bbox_equal
Fixes: 5d578c27ce ("v3d: add initial compiler plumbing for geometry shaders")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5787>
